Kenmore 110 Washer Manual

The Kenmore 110 is a high-efficiency top-loading washing machine known for its reliability, large capacity, and multiple wash cycles. It features electronic controls, a durable stainless steel wash basket, automatic temperature control, various load size options, and energy-saving modes. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic control panel, Stainless steel wash basket, Agitator, Lid lock, Water inlet valves, Drain pump, Leveling legs.

Feature	Description
Electronic Control Panel	LED display with touchpad for cycle selection
Stainless Steel Wash Basket	Durable, rust-resistant interior
Multiple Wash Cycles	Normal, Heavy Duty, Delicates, Quick Wash, etc.
Water Level Selection	Auto-sensing and manual settings for load size
Temperature Control	Hot, Warm, Cold water options
Lid Lock System	Safety feature during spin cycle
Energy Star Certified	Energy and water efficient
End-of-Cycle Signal	Audible alert when cycle completes
Delay Start	Set wash cycle to begin later
Self-Clean Cycle	Maintains machine cleanliness

Installation

Unpack and inspect contents. Place on level floor near water supply and drain.

Remove shipping materials: Take off transit bolts and packing.
Level the washer: Adjust front leveling legs; use bubble level.
Connect water supply: Attach hot and cold hoses to faucets (red=hot, blue=cold).
Connect drain hose: Secure to standpipe or laundry tub.
Plug into grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are tight to prevent leaks.

First-Time Setup

Power on washer; run initial test cycle.

Check water connections: Turn on water faucets; check for leaks.
Select language: If applicable, set display language.
Run clean cycle: Use Self-Clean cycle without clothes to flush system.
Test operation: Run a quick wash cycle to ensure proper function.

CAUTION! Do not use washer without removing transit bolts. Ensure lid closes properly.

Specifications

Capacity: 4.5 cubic feet.
Dimensions: 27" W x 27" D x 43" H.
Voltage: 120V AC, 60Hz.
Water Connections: Hot and cold water inlet hoses.
Max Spin Speed: 700 RPM.
Cycle Options: 10+ wash cycles, 5 soil levels, 3 spin speeds.
Controls: Electronic touchpad with LED display.
Warranty: 1-year limited parts and labor.
Weight: 150 lbs.

Controls and Settings

Access settings via control panel. Power Button: Turns washer on/off.

Cycle Selection: NORMAL, HEAVY DUTY, DELICATES, BEDDING, QUICK WASH, RINSE & SPIN, etc.

Options: TEMPERATURE (Hot, Warm, Cold), SOIL LEVEL (Light, Normal, Heavy), SPIN SPEED (High, Medium, Low, No Spin), EXTRA RINSE, DELAY START (1-24 hours). Display: Shows cycle time, settings, and error codes. Lid Lock: Engages during wash and spin; do not force open.

Connecting Water Supply

Hot/Cold: Use provided hoses; connect to corresponding faucets. Drain: Secure hose to standpipe (minimum height 39").

Turn off water supply before connecting.
Attach hoses: Hand-tighten; use pliers for 1/4 turn more.
Check for leaks: Turn on water; inspect connections.
Ensure drain hose is not kinked or bent sharply.

Tip: Use strain relief brackets on hoses if provided. Do not overtighten.

Operating the Washer

Follow steps for proper washing.

Load clothes: Do not overload; leave space for agitation.
Add detergent: Use HE detergent; follow manufacturer's instructions.
Select cycle: Choose based on fabric type and soil level.
Set options: Adjust temperature, spin speed, extra rinse as needed.
Start cycle: Press START/PAUSE; lid will lock.
Pause/stop: Press START/PAUSE to pause; press again to resume.
Unload: Wait for lid to unlock; remove clothes promptly.

WARNING! Do not open lid during spin cycle. Keep children away from operating washer.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean exterior: Wipe with damp cloth; no abrasive cleaners.
Clean interior: Run Self-Clean cycle monthly with washer cleaner.
Check hoses: Inspect for cracks or leaks annually; replace every 5 years.
Clean lint filter: If equipped, remove and rinse monthly.
Leveling: Recheck level if washer vibrates excessively.

CAUTION! Unplug before cleaning. Do not use harsh chemicals inside drum.

Regulatory Information

UL Listed: Complies with safety standards. Energy Star: Meets energy efficiency guidelines. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Ensure plugged in; close lid securely; check circuit breaker.
No water filling	Water supply/hoses	Turn on faucets; check for kinked hoses; clean inlet screens.
Excessive vibration	Leveling/load	Re-level washer; redistribute load; remove transit bolts.
Water not draining	Drain hose/clog	Check for kinks; clean pump filter; ensure standpipe height.
Error codes on display	Various faults	Refer to manual error code list; reset by unplugging for 5 minutes.
Leaking water	Loose connections	Tighten hoses; check door seal; ensure detergent dispenser closed.

Reset: Unplug for 5 minutes to reset control board.

Service: 1-800-469-4668; www.kenmore.com