Kenmore 600 Series Electric Dryer Manual

The Kenmore 600 Series Electric Dryer is a high-efficiency appliance designed for residential use, featuring multiple drying cycles, temperature settings, and safety features. It includes a durable stainless steel drum, moisture sensor for automatic drying, wrinkle guard option, and energy-saving modes. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation Requirements 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Dryer 8. Maintenance & Cleaning 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, Stainless steel drum, Lint filter, Exhaust vent, Power cord, Moisture sensor, Wrinkle guard option.

Feature	Description
Control Panel	Digital display with cycle selection and settings
Stainless Steel Drum	Durable interior for efficient drying
Lint Filter	Removable filter for easy cleaning
Exhaust Vent	Connects to external venting system
Power Cord	4-prong cord for 240V connection
Moisture Sensor	Automatically detects dryness level
Wrinkle Guard	Tumbles clothes periodically after cycle ends
Cycle Selection	Multiple cycles for different fabric types
Temperature Settings	Adjustable heat levels (High, Medium, Low, Air Fluff)
Start/Pause Button	Initiates or pauses drying cycle

Installation Requirements

Unpack and inspect contents. Ensure proper location and ventilation.

Choose location: Place on level floor near 240V outlet and venting.
Connect venting: Attach 4-inch diameter metal duct to exhaust vent.
Connect power: Plug 4-prong cord into dedicated 240V outlet.
Level the dryer: Adjust leveling feet to prevent vibration.

WARNING! Dryer is heavy; use two people for moving. Ensure proper grounding and venting to prevent fire hazard.

First-Time Setup

After installation, perform initial setup.

Remove shipping materials: Check drum and interior for packing items.
Clean lint filter: Remove and rinse filter before first use.
Test run: Run empty on Air Fluff cycle to remove dust.
Set preferences: Adjust display language and default settings if available.

CAUTION! Do not operate without proper venting. Ensure lint filter is installed.

Specifications

Model Series: Kenmore 600 Series.
Type: Electric Dryer.
Capacity: 7.0 cubic feet.
Power Requirements: 240V AC, 60Hz, 30 Amp circuit.
Drum Material: Stainless steel.
Cycles: Normal, Heavy Duty, Delicates, Permanent Press, Air Fluff, Quick Dry.
Temperature Settings: High, Medium, Low, No Heat.
Moisture Sensor: Yes, for automatic cycle termination.
Dimensions (HxWxD): Approximately 43" x 29" x 32".
Weight: Approximately 130 lbs.

Controls and Settings

Access settings via control panel. Power Button: Turns dryer on/off. Cycle Selector: Choose drying cycle. Temperature: Adjust heat level. Options: Wrinkle Guard, Extended Tumble, Signal.

Display: Shows cycle time, settings, and status messages.

Cycle Details: Normal (60 minutes), Heavy Duty (70 minutes), Delicates (30 minutes), Permanent Press (50 minutes), Air Fluff (10 minutes), Quick Dry (20 minutes). Temperature: High for heavy fabrics, Medium for normal, Low for delicate, No Heat for air fluff. Options: Wrinkle Guard tumbles clothes every 5 minutes after cycle ends; Extended Tumble adds extra time; Signal sounds when cycle completes.

Connecting to Power

Requires dedicated 240V, 60Hz, 30 Amp circuit with 4-prong outlet.

Turn off power at circuit breaker before connecting.
Plug 4-prong cord into matching outlet.
Ensure cord is not pinched or damaged.
Restore power at circuit breaker.

Tip: Use only 4-prong cord supplied. Do not use adapter for 3-prong outlet.

Operating the Dryer

Supports various fabric types and drying needs.

Load clothes: Place items loosely in drum; do not overload.
Select cycle: Turn cycle selector to desired setting.
Set temperature: Choose heat level appropriate for fabric.
Add options: Press Wrinkle Guard or other options if desired.
Start: Press Start/Pause button to begin cycle.
Monitor: Display shows remaining time; moisture sensor may adjust time automatically.
Complete: Remove clothes promptly after cycle ends; clean lint filter.

WARNING! Do not dry items contaminated with flammable substances. Clean lint filter after every use.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and safety.

Lint filter: Clean after every load; wash monthly with warm water.
Exhaust vent: Inspect and clean annually to prevent blockage.
Exterior: Wipe with damp cloth; do not use abrasive cleaners.
Drum: Wipe with soft cloth to remove residue.

CAUTION! Unplug dryer before cleaning. Never operate without lint filter.

Safety Information

Important safety precautions to prevent injury or damage.

Install and use only as instructed.
Keep area around dryer clear of flammable materials.
Do not dry rubber, plastic, or foam items.
Ensure proper grounding and electrical connection.
Supervise children near appliance.

WARNING! Risk of fire if not properly maintained. Clean lint filter and vent regularly.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer does not start	Power/door	Check circuit breaker; ensure door is fully closed; press Start firmly.
Clothes not drying	Lint/venting	Clean lint filter; check vent for blockage; select correct temperature.
Dryer is noisy	Leveling/objects	Level dryer; check for coins or objects in drum; tighten screws.
Error code on display	Sensor/fault	Refer to manual for code meaning; reset by unplugging for 1 minute.
Overheating	Venting/temperature	Clean vent system; ensure proper airflow; use lower temperature setting.

Reset: Unplug for 1 minute to reset control board.

Service: 1-800-469-4668; www.kenmore.com