Kenmore 700 Series Washer Manual

The Kenmore 700 Series Washer is a high-efficiency top-loading washing machine featuring multiple wash cycles, temperature settings, soil levels, and spin speeds. It includes advanced features like a deep fill option, extra rinse, delay start, and a stainless steel wash basket. This manual covers safety instructions, installation, operation, cycle guides, maintenance, and troubleshooting for optimal performance.

1. Features at a Glance 2. Installation & Setup 3. Control Panel Overview 4. Specifications 5. Cycle Selection Guide 6. Using Your Washer 7. Care & Maintenance 8. Error Codes 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Electronic Control Panel, Stainless Steel Wash Basket, Agitator, Lid Lock, Water Inlet Valves, Drain Pump, and Leveling Legs.

Feature	Description
Wash Cycles	Normal, Heavy Duty, Delicates, Bulky Items, Quick Wash, Rinse & Spin
Temperature Settings	Hot, Warm, Cold, Tap Cold
Soil Level	Light, Normal, Heavy
Spin Speed	High, Medium, Low, No Spin
Options	Deep Fill, Extra Rinse, Delay Start, Pre-Soak
Capacity	4.5 cu. ft.
Display	LED with cycle status and time remaining
Lid Lock	Automatic safety lock during operation
Water Savings	High-Efficiency (HE) design
Noise Reduction	Vibration reduction technology

Installation & Setup

Unpack and inspect contents. Place on a level, solid floor near water supply and drain.

Remove shipping materials: Take out transit bolts and packing from inside the drum.
Connect water supply: Attach hot and cold hoses to corresponding faucets (red=hot, blue=cold).
Connect drain hose: Secure to standpipe or laundry sink (minimum height 39 inches).
Level the washer: Adjust front leveling legs to prevent vibration; use a bubble level.
Plug into a grounded 120V AC outlet.

WARNING! Do not remove transit bolts before moving washer into final position. Ensure all connections are tight to prevent leaks.

Control Panel Overview

Access settings via the electronic control panel. Power Button: Turns washer on/off. Cycle Selector Knob: Choose desired wash cycle. Temperature Buttons: Select water temperature for wash and rinse. Options Buttons: Activate Deep Fill, Extra Rinse, etc. Start/Pause Button: Begins or pauses cycle.

LED Display: Shows cycle time, settings, and error codes. Signal Lights: Indicate cycle stage (Wash, Rinse, Spin).

Settings: Cycle-specific defaults can be adjusted. Use the "Signal" button to turn end-of-cycle signal on/off. Delay Start: Set start time up to 24 hours in advance.

Specifications

Model Series: Kenmore 700 Series.
Type: Top-Load High-Efficiency Agitator Washer.
Capacity: 4.5 cubic feet.
Color: White (standard).
Voltage: 120V AC, 60Hz.
Water Connections: Hot & Cold (¾” standard hoses).
Max Spin Speed: 700 RPM.
Dimensions (HxWxD): 43” x 27” x 27”.
Weight: 150 lbs (approx.).
Warranty: 1-year limited parts and labor.

Cycle Selection Guide

Choose cycle based on fabric type and soil level.

Cycle	Best For	Default Temp	Time (approx.)
Normal	Cotton, linens, mixed loads	Warm/Warm	40-60 min
Heavy Duty	Heavily soiled work clothes, jeans	Hot/Cold	60-80 min
Delicates	Silk, wool, hand-washables	Cold/Cold	25-35 min
Bulky Items	Comforters, pillows, sleeping bags	Warm/Cold	50-70 min
Quick Wash	Lightly soiled, 2-4 items	Cold/Cold	15-25 min
Rinse & Spin	Extra rinse or spin only	N/A	10-15 min

Tip: Use "Deep Fill" option for heavily soiled loads or when using non-HE detergent.

Using Your Washer

Supports standard and HE detergent. Follow load size guidelines.

Add detergent: Pour into dispenser or directly into drum (follow detergent instructions).
Load clothes: Do not overload; leave space for agitation.
Select cycle: Turn knob to desired cycle.
Adjust settings: Choose temperature, soil level, spin speed, and options.
Start: Close lid and press START/PAUSE. Lid will lock.
Pause/Add item: Press START/PAUSE to unlock lid (if safe). Add item within 2 minutes.
End of cycle: Signal sounds, lid unlocks. Remove clothes promptly.

WARNING! Do not force lid open during operation. Use only HE detergent to prevent oversudsing.

Care & Maintenance

Monthly cleaning recommended. Unplug before servicing.

Clean drum: Run "Clean Washer" cycle (if available) or use hot water with bleach or washer cleaner.
Wipe exterior: Use damp cloth; avoid abrasive cleaners.
Clean dispensers: Remove and rinse under warm water.
Check hoses: Inspect for cracks or leaks every 6 months.
Clean lint filter: Remove and rinse (location varies by model).

CAUTION! Do not use harsh chemicals. Keep area around washer dry to prevent mold.

Error Codes

If an error occurs, the display will show a code.

Code	Meaning	Action
F1	Water inlet problem	Check water supply and hoses.
F2	Drain issue	Check drain hose for blockage/kinks.
F5	Lid lock fault	Ensure lid is closed properly; cycle reset.
F7	Motor control error	Unplug for 5 minutes, then retry.
F9	Unbalanced load	Redistribute clothes; restart spin.
dE	Door/lid error	Close lid securely.

Reset: Unplug for 1 minute to clear most errors.

Regulatory Information

UL Listed; complies with U.S. safety standards. Energy Star® certified for high efficiency. Manufactured for Sears Brands, LLC. Copyright © Kenmore. For support, visit www.kenmore.com or contact 1-800-469-4668. Use only genuine Kenmore parts for repairs.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Ensure plugged in, outlet works, lid closed securely.
No water filling	Supply valves/hoses	Turn hot/cold valves on; check for kinks.
Water won't drain	Drain hose blockage	Clear hose; ensure proper height (39" min).
Excessive vibration/noise	Unlevel/transit bolts	Level washer; ensure transit bolts removed.
Clothes too wet after spin	Overload/low spin speed	Reduce load size; select higher spin speed.
Detergent residue	Overdosing/non-HE detergent	Use recommended amount of HE detergent.
Error code displayed	See Error Codes section	Refer to code chart above.

Service: 1-800-469-4668; www.kenmore.com