Kenmore 800 Series Washer Manual

The Kenmore 800 Series Washer is a high-efficiency top-loading washing machine featuring multiple wash cycles, adjustable settings for load size and soil level, energy-saving options, and advanced stain removal technology. It includes features like a deep clean agitator, automatic temperature control, delay start, and a large capacity drum. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Agitator, Drum, Lid, Water Inlet Valves, Drain Pump, Leveling Feet.

Feature	Description
Deep Clean Agitator	Provides thorough cleaning action for all load sizes
Multiple Wash Cycles	Includes Normal, Heavy Duty, Delicates, Quick Wash, and more
Soil Level Selection	Adjustable settings for Light, Normal, and Heavy soil
Load Size Selection	Small, Medium, Large, and Extra Large options
Automatic Temperature Control	Mixes hot and cold water to selected temperature
Delay Start	Allows delaying wash cycle start up to 24 hours
Energy Saver Option	Reduces energy consumption by using less hot water
Stain Removal Option	Extra agitation and soak time for tough stains
Large Capacity Drum	Handles larger loads efficiently
Lid Lock	Safety feature that locks lid during wash cycle

Installation

Unpack and inspect contents. Place on level floor near water supply and drain.

Remove shipping materials: Take off transit bolts and packaging.
Level the washer: Adjust front leveling feet until machine is stable.
Connect water supply: Attach hot and cold hoses to corresponding faucets.
Connect drain hose: Secure to standpipe or laundry sink.
Plug into grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

After installation, run an initial cleaning cycle.

Check level: Ensure washer doesn't rock; adjust feet if needed.
Test water connections: Run a quick rinse cycle to check for leaks.
Select language: If digital display supports it, set to ENGLISH.
Run cleaning cycle: Use washer cleaner or vinegar to clean drum before first use.
Familiarize with controls: Review cycle options and settings.

CAUTION! Ensure washer is level to prevent excessive vibration during spin cycles.

Specifications

Capacity: 4.5 cubic feet.
Type: High-Efficiency Top-Load Washer.
Water Connections: Hot and Cold water inlet hoses.
Electrical: 120V, 60Hz, 15 Amp grounded outlet.
Wash Cycles: Normal, Heavy Duty, Delicates, Quick Wash, Bulky Items, Rinse & Spin.
Options: Extra Rinse, Pre-Soak, Stain Removal, Delay Start.
Controls: Electronic with LED display.
Dimensions: Standard washer dimensions.
Weight: Approximately 150 lbs.

Controls and Settings

Control Panel: POWER, CYCLE SELECTION, OPTIONS, START/PAUSE, CANCEL.

Cycle Selection: Turn knob to select desired wash cycle. Options include Normal (for everyday loads), Heavy Duty (for heavily soiled items), Delicates (for gentle washing), Quick Wash (for lightly soiled loads), Bulky Items (for blankets, pillows), and Rinse & Spin (for additional rinsing or draining).

Options: Extra Rinse (adds additional rinse cycle), Pre-Soak (soaks clothes before washing), Stain Removal (increases agitation time), Delay Start (sets start time up to 24 hours later). Settings: Temperature (Hot, Warm, Cold), Soil Level (Light, Normal, Heavy), Spin Speed (High, Medium, Low, No Spin).

Connecting Water & Drain

Water Supply: Hot and cold water hoses. Drain: Drain hose to standpipe or sink.

Turn off water supply before connecting hoses.
Connect hot hose to hot water faucet (usually left side).
Connect cold hose to cold water faucet (usually right side).
Secure drain hose to standpipe (height 39-96 inches) or laundry sink.
Open water valves slowly and check for leaks.

Tip: Use only new hoses; replace old hoses every 5 years to prevent failure.

Using Wash Cycles

Follow these steps for optimal washing results.

Sort laundry: Separate by color, fabric type, and soil level.
Load washer: Do not overload; clothes should move freely.
Add detergent: Use HE detergent; follow manufacturer's instructions.
Select cycle: Choose appropriate cycle for load type.
Select options: Add Extra Rinse, Pre-Soak, or other options as needed.
Set temperature: Select water temperature based on fabric care labels.
Start cycle: Press START/PAUSE; lid will lock during operation.
Unload promptly: Remove clothes immediately after cycle completes to prevent wrinkles.

WARNING! Do not open lid during wash cycle; wait for lid lock to release.

Special Features

Delay Start: Program washer to start later (up to 24 hours). Stain Removal: Extra agitation for tough stains. Energy Saver: Uses less hot water. Automatic Balance System: Reduces vibration during spin cycle.

Care & Cleaning

Regular maintenance ensures optimal performance.

Clean drum monthly: Run empty cycle with washer cleaner or vinegar.
Wipe exterior: Use damp cloth; avoid abrasive cleaners.
Clean lint filter: Remove and rinse monthly (if applicable).
Check hoses: Inspect for cracks or bulges annually.
Leave lid open: Between uses to allow drum to dry and prevent odors.

CAUTION! Unplug washer before cleaning. Do not use harsh chemicals on control panel.

Regulatory Information

UL Listed: Complies with safety standards. Energy Star: Meets energy efficiency guidelines. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Ensure plugged in; close lid securely; check circuit breaker.
No water entering	Water supply	Check water valves are open; inspect hoses for kinks.
Water doesn't drain	Drain hose	Check for clogs; ensure drain hose isn't too high.
Excessive vibration	Leveling/load	Level washer; redistribute load evenly.
Leaking water	Hoses/connections	Tighten connections; replace damaged hoses.
Error codes displayed	Various issues	Consult manual for specific error code meaning.
Clothes still dirty	Cycle/detergent	Use heavier soil setting; ensure using correct detergent amount.

Reset: Unplug for 1 minute, then restart if experiencing issues.

Service: 1-800-469-4668; www.kenmore.com