Kenmore 800 Washing Machine Manual

The Kenmore 800 Series is a high-efficiency top-load washing machine featuring multiple wash cycles, adjustable settings, and advanced cleaning technology. It includes features such as a stainless steel wash basket, automatic temperature control, deep fill option, extra rinse, delay start, and end-of-cycle signal. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control Panel, Stainless Steel Wash Basket, Agitator, Lid Lock, Water Inlet Valves, Drain Pump, Leveling Legs.

Installation

Unpack and inspect contents. Place on level floor near water and drain connections.

1. Remove shipping materials: Take off transit bolts and packing.
2. Level the machine: Adjust front leveling legs; use level to ensure balance.
3. Connect water supply: Attach hot and cold hoses to corresponding faucets.
4. Connect drain hose: Secure to standpipe or laundry sink.
5. Plug into grounded electrical outlet.

WARNING! Machine is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

After installation, run an initial cleaning cycle.

1. Power on machine: Plug in and press POWER button.
2. Run cleaning cycle: Select "Clean Washer" cycle or run empty hot wash with bleach.
3. Set preferences: Use CONTROL LOCK if desired; adjust signal volume.
4. Test operation: Run a small load to ensure proper function.

CAUTION! Do not use until properly leveled. Check for leaks during first use.

Specifications

• Capacity: 4.5 cubic feet.
• Dimensions: 27" W x 27" D x 43" H.
• Voltage: 120V AC, 60Hz.
• Water Connections: Hot and Cold inlet hoses (5/8").
• Max Spin Speed: 800 RPM.
• Cycle Options: Normal, Heavy Duty, Delicates, Quick Wash, Bulky Items, Rinse & Spin.
• Controls: Electronic with LED display.
• Warranty: 1-year limited parts and labor.
• Weight: 150 lbs.

Controls and Settings

Access settings via control panel buttons and dial.

Control Panel: POWER, CYCLE SELECTION KNOB, START/PAUSE, OPTIONS (Temperature, Spin Speed, Soil Level), SIGNAL, CONTROL LOCK.

Cycle Selection: Turn knob to desired wash cycle. Options: Adjust temperature (Hot/Warm/Cold), spin speed (High/Medium/Low/No Spin), soil level (Heavy/Normal/Light). Special Features: Deep Fill, Extra Rinse, Delay Start (1-24 hours). Settings: Control Lock prevents accidental changes; Signal volume adjustable.

Connecting Utilities

Water: Hot and cold inlet hoses. Drain: Hose to standpipe or sink. Electrical: Grounded outlet.

1. Turn off water supply before connecting hoses.
2. Use only new hoses; do not overtighten.
3. Ensure drain hose is secured to prevent slipping.
4. Plug into dedicated 15-amp circuit; do not use extension cord.

Tip: Install drip pans if machine is on second floor or over finished spaces.

Using Wash Cycles

Supports various fabrics and soil levels.

1. Load laundry: Do not overload; mix large and small items.
2. Add detergent: Use HE detergent; follow manufacturer's instructions.
3. Select cycle: Turn knob to appropriate cycle for load.
4. Adjust options: Set temperature, spin speed, soil level as needed.
5. Add special features: Press DEEP FILL, EXTRA RINSE, or DELAY START if desired.
6. Start cycle: Press START/PAUSE; lid will lock.
7. Pause/stop: Press START/PAUSE to pause; turn knob to cancel.
8. Unload: Wait for lid to unlock; remove laundry promptly.

WARNING! Do not open lid during spin cycle. Balance load to prevent excessive vibration.

Special Features

Deep Fill: Manually adds extra water for heavily soiled loads. Extra Rinse: Adds rinse cycle for sensitive skin or detergent residue. Delay Start: Programs wash to begin up to 24 hours later. Control Lock: Prevents accidental button presses. End Signal: Audible alert when cycle completes; can be turned off.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean interior with washer cleaner monthly.

1. Clean lint filter: Remove and rinse monthly (located near agitator).
2. Run cleaning cycle: Use washer cleaner or hot water with bleach monthly.
3. Wipe door seal: Clean rubber gasket to prevent mildew.
4. Leave lid open: After use to allow interior to dry.

CAUTION! Do not use abrasive cleaners or solvents. Never spray water directly on controls.

Regulatory Information

UL Listed; meets NSF safety standards. Energy Star certified for high efficiency. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-469-4668; www.kenmore.com