Kenmore Air Conditioner Control Knobs Manual

The Kenmore Air Conditioner Control Knobs Manual provides essential information for operating and maintaining the control knobs on your Kenmore air conditioning unit. This guide covers knob functions, installation, troubleshooting, and safety precautions to ensure optimal performance and longevity of your appliance. Below are key sections for features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to AC Unit 7. Operation Guide 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Temperature Control Knob, Fan Speed Knob, Mode Selector Knob, Power Knob, Indicator Lights (if applicable).

Feature	Description
Temperature Control Knob	Adjusts cooling/heating temperature settings
Fan Speed Knob	Controls fan speed (Low, Medium, High, Auto)
Mode Selector Knob	Selects operating mode (Cool, Heat, Fan, Dry, Off)
Power Knob	Turns the air conditioner on/off
Indicator Lights	Shows current mode and status (on models equipped)
Knob Material	Durable plastic with ergonomic design
Mounting Type	Snap-fit or screw-on attachment
Compatibility	Designed for specific Kenmore AC models
Safety Features	Child-safe design, smooth rotation
Warranty	1-year limited warranty on knobs

Installation

Unpack and inspect contents. Ensure AC unit is powered off and unplugged.

Remove old knobs (if replacing): Gently pull straight off the control shafts.
Align new knobs: Match knob labels (Temp, Fan, Mode, Power) with corresponding shafts.
Attach knobs: Press firmly onto shafts until they click into place (snap-fit) or secure with screws if provided.
Test rotation: Ensure each knob turns smoothly without obstruction.

WARNING! Always disconnect power before installation to avoid electric shock. Do not force knobs onto shafts.

First-Time Setup

After installation, configure knobs for initial use.

Power on AC unit: Plug in and turn Power Knob to ON position.
Set Mode: Turn Mode Selector Knob to desired setting (Cool for cooling, Heat for heating, Fan for ventilation, Dry for dehumidification).
Adjust Temperature: Turn Temperature Control Knob to preferred comfort level (usually between 65°F-85°F).
Set Fan Speed: Turn Fan Speed Knob to Low, Medium, High, or Auto based on airflow needs.

CAUTION! Allow AC unit to run for 5-10 minutes after first startup to stabilize. Avoid rapid knob adjustments.

Specifications

Knob Type: Rotary mechanical knobs.
Material: High-impact ABS plastic.
Color: White/off-white (may vary by model).
Dimensions: Approximately 1.5-inch diameter per knob.
Rotation: 300-degree smooth rotation.
Compatibility: Kenmore AC models 580.XXXXX, 590.XXXXX series.
Operating Temp Range: 32°F to 110°F.
Warranty: 1-year limited warranty.

Controls and Settings

Each knob controls specific functions of the air conditioner.

Power Knob: ON/OFF positions. Turns unit on/off completely.

Mode Selector Knob: Cool (compressor runs for cooling), Heat (for heat pump models), Fan (fan only, no cooling/heating), Dry (dehumidification mode), Off (turns off cooling/heating but may keep fan on in some models).

Temperature Control Knob: Adjusts thermostat setting. Higher numbers = warmer, lower numbers = cooler.

Fan Speed Knob: Low (quiet operation), Medium (balanced airflow), High (maximum cooling), Auto (fan speed adjusts automatically based on temperature).

Connecting to AC Unit

Knobs connect directly to control shafts on AC front panel.

Identify shafts: Locate Temperature, Fan, Mode, and Power shafts on AC control panel.
Match knobs: Ensure each knob matches correct shaft (labels should align).
Secure connection: Push knobs firmly until seated. Do not overtighten screw-on types.
Verify: Test each knob for proper function before restoring power.

Tip: If knobs feel loose, check for proper alignment or consult installation guide for screw tightening.

Operation Guide

Proper knob operation ensures efficient AC performance.

Starting up: Turn Power Knob to ON, select Mode, set Temperature and Fan Speed.
Adjusting settings: Turn knobs gradually to desired positions.
Mode switching: Turn Mode Selector Knob to change between Cool, Heat, Fan, Dry.
Fan adjustment: Change Fan Speed Knob as needed for comfort.
Temperature setting: Adjust Temperature Control Knob for desired room temperature.
Power off: Turn Power Knob to OFF when not in use.

WARNING! Do not force knobs beyond their stops. Turn gently to avoid damage.

Maintenance & Cleaning

Unplug AC unit before cleaning. Use soft, dry cloth to wipe knobs. For stubborn dirt, use mild soap solution on cloth (not directly on knobs).

CAUTION! Do not use abrasive cleaners, solvents, or excessive moisture. Never immerse knobs in water.

Regulatory Information

FCC Part 15: Class B digital device (if electronic components present). Complies with applicable safety standards. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Knob does not turn	Misaligned, obstructed	Realign knob on shaft; check for debris; do not force.
Knob feels loose	Not fully seated, worn shaft	Push knob firmly onto shaft; if still loose, contact support.
AC does not respond to knob	Power issue, knob not connected	Check power connection; ensure knob is properly installed.
Knob markings worn	Normal wear	Use label maker for new markings; order replacement if needed.
Knob broken/cracked	Physical damage	Order replacement knob set; do not use damaged knobs.

Replacement: Order part #KNOB-AC-KENMORE from authorized dealers.

Service: 1-800-469-4668; www.kenmore.com