Kenmore Canister Vacuum Owner's Manual

The Kenmore Canister Vacuum is a powerful and versatile cleaning appliance designed for efficient home maintenance. It features a high-performance motor, multiple cleaning attachments, adjustable suction power, HEPA filtration system, and a retractable power cord. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Canister body with motor, telescopic wand, power nozzle, hose assembly, and accessory storage compartment.

Assembly & Setup

Unpack all components and inspect for damage.

1. Attach hose to canister: Push hose connector into inlet until it clicks.
2. Connect telescopic wand: Insert wand into hose handle and twist to lock.
3. Attach cleaning tool: Choose desired attachment and push onto wand end.
4. Plug into electrical outlet: Ensure outlet is properly grounded.

WARNING! Ensure all connections are secure before operation. Keep fingers away from moving parts.

First-Time Use

Before first use, install vacuum bag and check all connections.

1. Install vacuum bag: Open bag compartment, insert new bag, and close securely.
2. Check filter: Ensure HEPA filter is properly seated in filter compartment.
3. Test suction: Turn on vacuum and verify proper operation.
4. Adjust settings: Set suction control based on cleaning surface.

CAUTION! Do not use without bag or filter installed. Keep hair, loose clothing, and fingers away from brush roll.

Specifications

• Motor Power: 12.0 Amps, 120V AC.
• Suction Power: Adjustable, up to 250 Air Watts.
• Filtration: HEPA filtration system.
• Cord Length: 25-foot retractable cord.
• Capacity: 2.5-quart disposable bag.
• Noise Level: ≤ 75 dB.
• Weight: 15.5 lbs (canister only).
• Warranty: 1-year limited warranty.
• Operating Temp: 40°F to 104°F (4°C to 40°C).

Controls and Settings

Main controls located on canister body: Power switch, Suction control dial, Cord rewind button.

Power Nozzle Controls: On/Off switch, Height adjustment (for carpet types), Brush roll on/off for hard floors.

Suction Control: Adjust from MIN to MAX for different surfaces (delicate drapes to deep pile carpets). Bag Full Indicator: Red light illuminates when bag needs replacement. Cord Rewind: Press button to automatically retract cord.

Using Cleaning Attachments

Each attachment designed for specific cleaning tasks.

1. Power Nozzle: For carpets; adjust height for carpet pile.
2. CreVice Tool: For corners, edges, and tight spaces.
3. Dusting Brush: For blinds, lampshades, and delicate surfaces.
4. Upholstery Tool: For furniture, stairs, and auto interiors.
5. Extension Wands: Combine for high or hard-to-reach areas.

Tip: Turn off vacuum before changing attachments. Store all attachments in provided compartment.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Replace bag: When bag full indicator lights or suction decreases.
2. Clean filters: Remove and tap HEPA filter monthly; replace every 6-12 months.
3. Check brush roll: Remove tangled hair and debris regularly.
4. Inspect hose: Clear any obstructions and check for cracks.
5. Clean attachments: Wipe with damp cloth as needed.

WARNING! Always unplug vacuum before performing maintenance. Use only genuine Kenmore replacement parts.

Storage & Care

Store in cool, dry place away from direct sunlight.

1. Retract cord completely before storage.
2. Empty bag compartment if storing for extended periods.
3. Store attachments in provided compartment.
4. Keep vacuum upright to prevent damage.

CAUTION! Do not store with wet attachments. Keep away from heat sources and moisture.

Regulatory Information

UL Listed: Meets UL safety standards. FCC Part 15: Class B digital device; complies with interference limits. Copyright © 2025 Kenmore; trademarks of Kenmore, Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Reset: Unplug for 10 minutes if motor overheats.

Service: 1-800-469-4668; www.kenmore.com