Kenmore Connect Dryer Manual

The Kenmore Connect Dryer is a smart, energy-efficient dryer featuring Wi-Fi connectivity, multiple drying cycles, sensor drying technology, steam refresh option, large capacity drum, and compatibility with the Kenmore Smart app for remote control and monitoring. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi & App 7. Using Drying Cycles 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, drum light, lint filter, exhaust vent, power cord, and Wi-Fi module.

Feature	Description
Wi-Fi Connectivity	Remote control via Kenmore Smart app
Sensor Drying	Automatically adjusts time based on moisture
Steam Refresh	Reduces wrinkles and odors without washing
Multiple Cycles	Cotton, Permanent Press, Delicates, Quick Dry, etc.
Large Capacity	7.4 cu. ft. drum for bulky loads
Energy Efficient	ENERGY STAR certified
Control Lock	Prevents accidental changes
End-of-Cycle Signal	Audible alert when cycle completes
Drum Light	Illuminates interior for easy loading/unloading
Lint Filter Indicator	Reminder to clean lint filter

Installation

Unpack and inspect contents. Ensure location is level, well-ventilated, and near appropriate power outlet.

Remove shipping materials: Remove all tapes, bolts, and packaging from drum and interior.
Place dryer: Position on stable, level surface near venting outlet.
Connect venting: Attach flexible or rigid metal duct to exhaust vent; ensure proper airflow.
Electrical connection: Plug into dedicated 240V outlet (for electric model) or connect gas line (for gas model).
Level dryer: Adjust leveling legs to prevent vibration.

WARNING! Dryer is heavy; use two people for moving. Ensure proper ventilation to prevent fire hazard.

First-Time Setup

Power on dryer; follow initial setup prompts.

Connect to power: Plug in and ensure power is available.
Initial cycle: Run a quick empty load to remove any residues.
Set preferences: Use control panel to set time, signal volume, and default settings.
Connect to Wi-Fi: Follow instructions in "Connecting to Wi-Fi & App" section.

CAUTION! Ensure dryer is properly leveled and venting is secure before first use.

Specifications

Model Type: Kenmore Connect Dryer (Electric/Gas).
Capacity: 7.4 cubic feet.
Power Requirements: 240V AC, 60Hz (Electric); 120V for controls (Gas).
Wi-Fi: 2.4 GHz network compatible.
Drying Cycles: Auto Dry, Timed Dry, Steam, Delicates, Heavy Duty, etc.
Sensor Technology: Moisture sensor for efficient drying.
Noise Level: Standard operating sound.
Dimensions: Standard dryer size; refer to manual for exact measurements.
Weight: Approximately 130 lbs.

Controls and Settings

Access settings via control panel or Kenmore Smart app. Control Panel: POWER, START/PAUSE, CYCLE SELECTOR, TEMPERATURE, DRYNESS LEVEL, OPTIONS, CONTROL LOCK.

Display: Shows cycle time, remaining time, settings, and status messages.

Cycle Settings: Adjust temperature (High, Medium, Low, Air Fluff), dryness level (More Dry, Less Dry), and options (Steam, Wrinkle Shield, Signal). App Control: Remote start/pause, cycle selection, notifications, energy monitoring. Settings: Time, volume, default cycle, Wi-Fi setup, factory reset.

Connecting to Wi-Fi & App

Connect dryer to home Wi-Fi for smart features.

Download Kenmore Smart app from App Store or Google Play.
Create account or log in.
On dryer, press and hold Wi-Fi button until indicator flashes.
Follow in-app instructions to connect dryer to 2.4 GHz network.
Test connection by starting a cycle remotely.

Tip: Ensure dryer is within range of Wi-Fi router. Use 2.4 GHz network (5 GHz not supported).

Using Drying Cycles

Supports various fabrics and drying needs.

Load dryer: Place clothes evenly in drum; do not overload.
Select cycle: Turn cycle selector to desired setting (e.g., Cotton, Permanent Press).
Adjust settings: Set temperature, dryness level, and options (e.g., Steam).
Start: Press START/PAUSE. Dryer will begin; sensor drying adjusts time automatically.
Pause/Stop: Press START/PAUSE to pause; press again to resume. To cancel, hold button.
Steam cycle: Select Steam option for refresh; add water to reservoir if prompted.
End of cycle: Signal sounds; remove clothes promptly to reduce wrinkles.

WARNING! Do not dry items containing foam, rubber, or plastic. Clean lint filter before every load.

Care & Maintenance

Regular maintenance ensures optimal performance and safety.

Lint Filter: Clean before every load; wash with warm water monthly.
Exhaust Vent: Inspect and clean annually to prevent lint buildup.
Drum: Wipe with damp cloth; avoid abrasives.
Exterior: Clean with mild detergent and soft cloth.
Water Reservoir (Steam models): Empty and clean periodically.

CAUTION! Unplug dryer before cleaning. Never use harsh chemicals or spray directly on controls.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL listed; meets safety standards. Copyright © Kenmore; trademarks of Kenmore, Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power, door, settings	Ensure plugged in, door closed, cycle selected; check circuit breaker.
Clothes not drying	Lint filter, vent, settings	Clean lint filter; check vent for blockage; ensure proper cycle/temperature.
No Wi-Fi connection	Network, distance, setup	Check router; ensure 2.4 GHz; reconnect via app; move dryer closer.
Unusual noise	Objects in drum, leveling	Check for coins/objects; ensure dryer is level; inspect drum rollers.
Error code on display	Various faults	Refer to manual error code list; unplug for 5 minutes, then retry.

Reset: Unplug for 5 minutes, or use factory reset in settings.

Service: 1-800-469-4668; www.kenmore.com