Kenmore Connect Dryer Model 81182 Manual

The Kenmore Connect Dryer Model 81182 is an electric dryer with smart connectivity features, multiple drying cycles, sensor drying technology, steam refresh option, and energy-saving modes. It offers a large capacity drum, reversible door, end-of-cycle signal, and diagnostic functions. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Wi-Fi 7. Using Drying Cycles 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity drum, LED control panel, Wi-Fi module, lint filter, reversible door, steam nozzle, exhaust vent.

Feature	Description
Smart Connectivity	Wi-Fi enabled for remote control via mobile app
Sensor Drying	Automatically adjusts time based on moisture levels
Steam Refresh	Reduces wrinkles and odors without full drying cycle
Multiple Cycles	Includes Normal, Delicates, Heavy Duty, Quick Dry, etc.
Reversible Door	Can be hinged on left or right side
End-of-Cycle Signal	Audible alert when cycle completes
Energy Saver Mode	Reduces energy consumption during standby
Diagnostic Mode	Self-tests for error codes and troubleshooting
Child Lock	Prevents accidental changes to settings
Delay Start	Set dryer to start at a later time

Installation

Unpack and inspect contents. Place on level floor near venting outlet.

Remove shipping materials: Remove tape, bolts, and foam from drum interior.
Connect exhaust vent: Use 4-inch rigid metal duct; avoid plastic or flexible foil.
Connect power: Plug into dedicated 240V outlet; ensure proper grounding.
Level the dryer: Adjust leveling feet to prevent vibration.
Connect to Wi-Fi: Follow app instructions for initial network setup.

WARNING! Dryer is heavy; use two people for lifting. Ensure proper ventilation to prevent fire hazard.

First-Time Setup

Power on dryer; follow on-screen prompts on control panel.

Select language: Press SETTINGS, choose ENGLISH (default).
Set time and date: Use numeric pad to enter current time.
Connect to Wi-Fi: Navigate to NETWORK settings, select your SSID, enter password.
Download mobile app: Scan QR code on control panel or visit app store.
Run test cycle: Select QUICK DRY with empty drum to verify operation.

CAUTION! Ensure dryer is not resting on power cord or vent hose.

Specifications

Model: 81182
Type: Electric Dryer
Capacity: 7.4 cu. ft.
Power Requirements: 240V AC, 60Hz, 30A
Dimensions (HxWxD): 43" x 29" x 32"
Weight: 150 lbs
Control Panel: LED touch display with physical dial
Connectivity: 2.4 GHz Wi-Fi (802.11 b/g/n)
Noise Level: ≤ 65 dB
Energy Rating: ENERGY STAR® certified

Controls and Settings

Access settings via control panel or mobile app. Control Panel: POWER, CYCLE SELECTOR, START/PAUSE, OPTIONS, SETTINGS.

Mobile App: Remote start/stop, cycle monitoring, notifications, energy usage tracking.

Cycle Settings: Temperature (High, Medium, Low, No Heat), Dryness Level (More Dry, Less Dry), Time Dry (10-180 minutes). Options: Steam, Delay Start, Signal Volume, Child Lock. Settings: Language, Time/Date, Network, Factory Reset.

Connecting to Wi-Fi

Requires 2.4 GHz Wi-Fi network and mobile app.

Enable Wi-Fi on dryer: Press SETTINGS > NETWORK > ENABLE.
Open mobile app: Follow prompts to add new device.
Select network: Choose your SSID, enter password.
Confirm connection: LED will show solid blue when connected.

Tip: Keep dryer within range of router for stable connection.

Using Drying Cycles

Supports various fabrics and load sizes.

Load laundry: Do not overload; leave space for tumbling.
Select cycle: Turn dial to desired cycle (Normal, Delicates, Heavy Duty, etc.).
Adjust settings: Press OPTIONS for temperature, dryness, steam.
Start: Press START/PAUSE; display shows remaining time.
Monitor remotely: Use app to check progress, receive alerts.
Clean lint filter: Remove and clean after every cycle.
Unload promptly: Remove items when cycle ends to prevent wrinkles.

WARNING! Do not dry items contaminated with flammable substances. Clean lint filter regularly to prevent fire.

Care & Maintenance

Unplug before cleaning. Wipe exterior with damp cloth; clean lint filter after each use. Inspect vent system annually.

Monthly: Clean lint filter with warm water, dry completely. Annually: Check exhaust vent for obstructions; hire professional for duct cleaning if needed.

CAUTION! Do not use abrasive cleaners; never operate without lint filter.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL listed. Copyright © 2023 Kenmore; trademarks of Kenmore, Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Door open/power	Ensure door closed securely; check power outlet and breaker.
No heat	Settings/thermal fuse	Verify cycle set to heated option; check thermal fuse; reset dryer.
Wi-Fi disconnected	Network/router	Re-enter network password; move dryer closer to router; restart router.
Excessive vibration	Leveling/load	Adjust leveling feet; redistribute load evenly in drum.
Long drying times	Lint/vent	Clean lint filter; check exhaust vent for blockages; reduce load size.
Error code displayed	System fault	Refer to error code chart in manual; unplug for 5 minutes, then retry.

Reset: Unplug for 1 minute or press and hold START/PAUSE for 10 seconds.

Service: 1-800-469-4668; www.kenmore.com