Kenmore Dryer 417.83042201 Manual

The Kenmore Dryer model 417.83042201 is an electric dryer designed for residential use, featuring multiple drying cycles, temperature settings, and safety functions. It includes a moisture sensor for automatic drying, a wrinkle guard option, and a large capacity drum. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Dryer 8. Maintenance & Cleaning 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, moisture sensor, lint filter, drum light, exhaust vent, and power cord connection.

Feature	Description
Moisture Sensor	Automatically detects dryness and ends cycle
Multiple Cycles	Includes Normal, Delicates, Heavy Duty, Air Fluff, and more
Temperature Settings	High, Medium, Low, and No Heat options
Wrinkle Guard Option	Tumbles clothes periodically after cycle ends
Large Capacity Drum	Accommodates large laundry loads
Control Lock	Prevents accidental changes to settings
Drum Light	Illuminates interior when door is open
Lint Filter	Removable filter for easy cleaning
End-of-Cycle Signal	Audible alert when drying is complete
Exhaust Vent	Rear connection for venting moist air

Installation

Unpack and inspect contents. Ensure location is level and well-ventilated.

Remove shipping materials: Take off tape, bolts, and brackets from drum and rear.
Connect exhaust vent: Use rigid or flexible metal ducting; avoid plastic.
Level the dryer: Adjust leveling feet to prevent vibration.
Connect power: Plug into dedicated 240V outlet (for electric models).

WARNING! Dryer is heavy; use two people for moving. Ensure proper grounding.

First-Time Setup

After installation, perform initial setup.

Check lint filter: Ensure it is clean and properly installed.
Run test cycle: Select Air Fluff cycle (no heat) for 10 minutes to clear any dust.
Set preferences: Adjust signal volume, display brightness, and default settings via control panel.
Review safety: Read safety section before first use.

CAUTION! Do not overload dryer. Follow load size recommendations.

Specifications

Model: 417.83042201
Type: Electric Dryer
Capacity: 7.0 cubic feet
Power Requirements: 240V AC, 60Hz, 30A circuit
Dimensions (HxWxD): 43" x 29" x 32"
Weight: 130 lbs
Exhaust Vent Size: 4-inch diameter
Control Type: Electronic with digital display
Cycles: 10+ including Timed Dry, Sensor Dry, and Wrinkle Guard
Warranty: 1-year limited parts and labor

Controls and Settings

Control Panel: POWER, CYCLE SELECTOR, TEMPERATURE, OPTIONS (Wrinkle Guard, Signal), START/PAUSE.

Cycles: Normal, Permanent Press, Delicates, Heavy Duty, Bulky Items, Air Fluff, Timed Dry. Temperature: High, Medium, Low, No Heat. Options: Wrinkle Guard, Control Lock, End-of-Cycle Signal, Delay Start.

Settings Menu: Press and hold OPTIONS for 3 seconds to access display brightness, signal volume, factory reset.

Connecting to Power

This is an electric dryer requiring 240V power.

Turn off circuit breaker before connecting.
Use 4-prong power cord (not included); match wires to terminal block (L1, L2, N, G).
Secure cord strain relief.
Plug into dedicated 240V, 30A outlet.

Tip: Have installation performed by qualified electrician if unsure.

Operating the Dryer

Supports various fabrics and load sizes.

Load clothes: Do not overload; leave room for tumbling.
Select cycle: Turn cycle selector to desired setting.
Set temperature: Press TEMPERATURE button to choose heat level.
Add options: Press OPTIONS for Wrinkle Guard or Delay Start.
Start: Press START/PAUSE. Display shows remaining time.
Pause/Stop: Press START/PAUSE to pause; press again to stop.
Unload: Remove clothes promptly after cycle ends to minimize wrinkles.

WARNING! Do not dry items contaminated with flammable substances. Clean lint filter before every load.

Maintenance & Cleaning

Regular maintenance ensures performance and safety.

Lint filter: Clean before every load; wash monthly with warm water.
Exhaust vent: Inspect and clean annually to prevent lint buildup.
Exterior: Wipe with damp cloth; do not use abrasive cleaners.
Drum: Wipe with soft cloth to remove residue.

CAUTION! Unplug dryer before cleaning. Never operate without lint filter.

Safety Information

Important safety precautions to prevent fire, electric shock, or injury.

Install and ground properly according to local codes.
Do not dry articles that have been cleaned with flammable fluids.
Do not place items exposed to cooking oils in dryer.
Keep area around exhaust vent clear of lint and debris.
Supervise children when dryer is in use.

WARNING! Risk of fire. Clean lint filter before each use.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Door not closed, circuit breaker tripped	Close door securely; check circuit breaker; ensure START pressed.
No heat	Temperature setting, heating element	Check temperature setting; verify power supply; heating element may need replacement.
Clothes too wet after cycle	Lint filter clogged, overloaded	Clean lint filter; reduce load size; ensure proper exhaust venting.
Dryer is noisy	Foreign objects, unbalanced load	Check drum for objects; redistribute load; ensure dryer is level.
Error code on display	Sensor fault, overheating	Unplug for 5 minutes; clean moisture sensor; check vent blockage.

Reset: Unplug for 5 minutes to reset control board.

Service: 1-800-469-4668; www.kenmore.com