Kenmore Dryer Model 417.88042700 Manual

The Kenmore Dryer Model 417.88042700 is an electric dryer with multiple cycles and temperature settings, designed for residential use. It features a large capacity drum, moisture sensor for automatic drying, wrinkle guard option, end-of-cycle signal, and safety features like a thermal fuse and lint filter indicator. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Dryer 8. Maintenance 9. Safety Information 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with cycle selector, Start button, Temperature settings, Moisture sensor, Lint filter, Drum light, Power cord.

Feature	Description
Cycle Selector Knob	Selects drying cycles (Normal, Delicates, Heavy Duty, etc.)
Temperature Settings	Adjustable heat levels (High, Medium, Low, Air Fluff)
Moisture Sensor	Automatically stops drying when clothes are dry
Wrinkle Guard Option	Tumbles clothes periodically after cycle to reduce wrinkles
End-of-Cycle Signal	Audible signal when drying is complete
Lint Filter	Removable filter for lint collection
Drum Light	Interior light for visibility when loading/unloading
Start Button	Initiates selected drying cycle
Power Cord	4-prong cord for 240V electrical connection
Door Switch	Safety switch stops dryer when door is open

Installation

Unpack and inspect contents. Place on level floor near venting outlet.

Remove shipping materials: Remove tape, bolts, and foam from drum and interior.
Connect venting: Use 4-inch diameter rigid metal duct; avoid plastic or flexible foil.
Level the dryer: Adjust leveling legs to ensure dryer is stable and does not rock.
Connect power: Ensure electrical outlet matches dryer requirements (240V, 30A).
Test operation: Run a short cycle to verify proper installation.

WARNING! Dryer is heavy; use two people for lifting. Ensure venting is secure to prevent fire hazard.

First-Time Setup

After installation, prepare dryer for first use.

Clean lint filter: Remove and clean filter before first load.
Select language: If control panel has display, set to ENGLISH (default).
Run empty cycle: Run dryer on Air Fluff cycle for 10 minutes to remove dust.
Load laundry: Do not overload; follow capacity guidelines in manual.

CAUTION! Ensure dryer is properly grounded. Keep area around dryer clear of flammable materials.

Specifications

Model Number: 417.88042700
Type: Electric Dryer
Capacity: 7.0 cubic feet
Power Requirements: 240V AC, 60Hz, 30A
Cycles: Normal, Delicates, Permanent Press, Heavy Duty, Air Fluff, Quick Dry
Temperature Settings: High, Medium, Low, Air Fluff (no heat)
Moisture Sensor: Yes, for automatic drying
Wrinkle Guard: Optional tumbling after cycle
Dimensions: Standard dryer size (refer to manual for exact measurements)
Weight: Approximately 130 lbs

Controls and Settings

Control Panel: Cycle selector knob, Temperature buttons, Start button, Option buttons.

Cycle Selection: Turn knob to desired cycle (Normal, Delicates, Permanent Press, Heavy Duty, Air Fluff, Quick Dry).

Temperature: Press TEMP button to cycle through High, Medium, Low, Air Fluff. Options: Wrinkle Guard (press to enable), Signal (press to turn end-of-cycle signal on/off). Start: Press to begin cycle; dryer will not start if door is open.

Connecting to Power

Electrical: 4-prong 240V outlet required.

Turn off power at circuit breaker before connecting.
Connect power cord: Attach cord terminals to dryer terminal block (follow wiring diagram).
Secure ground wire: Ensure green ground wire is connected properly.
Plug into outlet: Ensure outlet is dedicated 30A circuit.

Tip: Have a qualified electrician install outlet if not already present.

Operating the Dryer

Follow these steps for safe and efficient drying.

Load laundry: Sort by fabric type; do not overload (leave space for tumbling).
Clean lint filter: Remove lint before every load.
Select cycle: Turn knob to appropriate cycle for load type.
Set temperature: Press TEMP to desired heat setting.
Set options: Press Wrinkle Guard or Signal if desired.
Start: Close door and press Start button.
Monitor: Dryer will stop automatically when moisture sensor detects dryness.
Unload promptly: Remove clothes immediately to reduce wrinkles.

WARNING! Do not dry items contaminated with flammable substances. Clean lint filter after every load to prevent fire.

Maintenance

Regular maintenance ensures optimal performance and safety.

Lint Filter: Clean after every load; wash with warm water monthly.
Venting System: Inspect and clean duct annually to prevent lint buildup.
Exterior: Wipe with damp cloth; do not use abrasive cleaners.
Drum: Check for sharp objects that could damage drum surface.
Moisture Sensor: Clean sensor bars with rubbing alcohol if dryer does not dry properly.

CAUTION! Unplug dryer before cleaning interior. Never operate without lint filter.

Safety Information

Important safety precautions to prevent injury or fire.

Install dryer according to local codes and manufacturer instructions.
Use rigid metal duct for venting; do not use plastic or foil.
Keep dryer area clear of flammable materials (gasoline, cleaning fluids).
Do not operate dryer if it is damaged or making unusual noises.
Supervise children around dryer; do not allow climbing or playing on it.
Do not dry rubber, plastic, or foam items.

Regulatory Information

UL listed; complies with U.S. safety standards. Manufactured for Sears Brands, LLC. Copyright © Kenmore; trademarks of Sears Holdings Management Corporation. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer will not start	Door open, power issue	Ensure door is closed; check circuit breaker; verify power cord connection.
No heat	Thermal fuse, heating element	Check thermal fuse; inspect heating element for continuity; call technician.
Clothes not drying	Lint filter, venting	Clean lint filter; check vent for blockage; ensure moisture sensor is clean.
Dryer is noisy	Foreign objects, worn parts	Check drum for objects; inspect rollers and belts; tighten mounting bolts.
Error codes on display	Sensor failure, electrical issue	Refer to manual for code meaning; reset dryer; call service if persistent.

Reset: Unplug dryer for 5 minutes to reset control board.

Service: 1-800-469-4668; www.kenmore.com