Kenmore Dryer Model 592 Manual

The Kenmore Dryer Model 592 is an electric dryer designed for residential use, featuring multiple drying cycles, temperature settings, and a durable stainless steel drum. It includes safety features like a thermal fuse and lint filter indicator, and is designed for easy installation and maintenance. Below are key sections for safety, features, installation, operation, care, and troubleshooting.

Features at a Glance

Key components: Stainless steel drum, Control panel with digital display, Lint filter, Exhaust vent, Power cord, Door with safety switch.

Installation

Unpack and inspect contents. Place on level surface near venting outlet.

1. Connect exhaust vent: Attach vent hose to dryer exhaust port and wall vent.
2. Connect power: Plug into dedicated 240V outlet (for electric models).
3. Level the dryer: Adjust leveling feet to ensure stability.
4. Check lint filter: Ensure it is properly installed.

WARNING! Dryer is heavy; lift with care to avoid injury. Ensure venting is secure to prevent fire hazard.

First-Time Setup

Power on dryer; follow initial setup steps.

1. Select language: On control panel, set display language (default ENGLISH).
2. Set default cycle: Choose preferred drying cycle (Normal recommended).
3. Test run: Run empty on Air Dry cycle to ensure proper operation.
4. Adjust settings: Use control panel to set temperature and time preferences.

CAUTION! Ensure dryer is properly vented; do not block exhaust.

Specifications

• Model: 592.
• Type: Electric dryer.
• Capacity: Standard residential capacity.
• Power: 240V AC, 60Hz.
• Cycles: Normal, Delicate, Permanent Press, Heavy Duty, Air Dry.
• Temperature Settings: High, Medium, Low, Air Dry.
• Features: End-of-cycle signal, wrinkle guard option, lint filter indicator.
• Dimensions: Standard dryer size.
• Weight: Approximately 150 lbs.

Controls and Settings

Access settings via control panel. Front Panel: POWER, START/PAUSE, CYCLE SELECT, TEMP CONTROL.

Display: Shows cycle, time remaining, temperature setting.

Cycles: NORMAL (default), DELICATE, PERMANENT PRESS, HEAVY DUTY, AIR DRY. Temperature: HIGH (cotton), MEDIUM (synthetics), LOW (delicate), AIR DRY (no heat). Options: WRINKLE GUARD (tumbling after cycle), SIGNAL (end-of-cycle beep). Settings: Language, default cycle, time adjustment.

Connecting to Power

Electric: Requires 240V outlet. Gas: Requires gas line connection (if applicable).

1. Turn off power at circuit breaker before connecting.
2. Plug power cord into dedicated outlet (electric models).
3. For gas models, connect gas line with approved fittings.
4. Ensure grounding is proper.

Tip: Use a qualified electrician for installation if unsure.

Operating the Dryer

Supports various fabrics and load sizes.

1. Load laundry: Place clothes in drum, do not overload.
2. Select cycle: Use CYCLE SELECT for desired setting.
3. Set temperature: Choose appropriate heat with TEMP CONTROL.
4. Start: Press START/PAUSE to begin drying.
5. Pause: Press START/PAUSE to stop; open door to add/remove items.
6. End of cycle: Dryer stops automatically; signal sounds if enabled.
7. Clean lint filter: Remove and clean after every cycle.

WARNING! Do not dry items contaminated with chemicals; clean lint filter regularly to prevent fire.

Maintenance & Cleaning

Unplug before maintenance. Clean lint filter after each use. Wipe exterior with damp cloth.

Monthly: Check vent hose for blockage; clean drum with mild detergent.

CAUTION! Do not use harsh chemicals; ensure dryer is unplugged during cleaning.

Safety Information

Thermal fuse: Prevents overheating. Door safety switch: Stops drum when open. Lint filter indicator: Alerts when filter needs cleaning.

Important: Install smoke detector nearby; do not leave dryer unattended.

Warranty & Support

Limited warranty: Covers parts and labor for one year from purchase. For support, visit www.kenmore.com or contact 1-800-536-6247. Keep receipt for warranty claims.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-536-6247; www.kenmore.com