Kenmore Elegance Canister Vacuum Manual

The Kenmore Elegance Canister Vacuum is a powerful and versatile cleaning system designed for deep carpet and bare floor cleaning. It features a multi-cyclonic filtration system, adjustable suction power, a variety of specialized attachments, HEPA filtration, automatic cord rewind, and a telescoping wand. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Canister body with motor, telescoping metal wand, power nozzle for carpets, bare floor brush, crevice tool, dusting brush, upholstery nozzle, and storage caddy.

Assembly & Setup

Unpack all parts and inspect for damage. Assemble on a flat, clean surface.

1. Attach the wand: Insert the telescoping wand into the hose socket on the canister until it clicks.
2. Connect the hose: Push the hose end firmly onto the wand connector.
3. Choose an attachment: Select the power nozzle, floor brush, or tool and push it onto the wand end.
4. Plug into a standard 120V AC outlet.

WARNING! Ensure the vacuum is unplugged during assembly. Do not force connections.

First-Time Use

Before first use, install a new vacuum bag and check all filters.

1. Install bag: Open the bag compartment door, insert a new Kenmore Type J bag, and close the door securely.
2. Check filters: Ensure the pre-motor and HEPA filters are properly seated.
3. Select suction: Turn the suction control dial to the middle setting for general cleaning.
4. Turn on: Press the On/Off switch; the power nozzle brush roll will engage automatically on carpets.

CAUTION! Do not vacuum wet surfaces, large debris, or hot ashes.

Specifications

• Model Series: Kenmore Elegance Canister Series.
• Motor: 12 Amp high-efficiency motor.
• Filtration: Multi-cyclonic system with HEPA final filter.
• Cord Length: 30 feet with automatic rewind.
• Bag Type: Kenmore Type J disposable bags.
• Attachments: Power nozzle, bare floor brush, crevice tool, dusting brush, upholstery nozzle.
• Warranty: 1-year limited warranty on parts and labor.
• Power Source: 120V AC, 60Hz.
• Weight: Approximately 18 lbs.

Controls and Settings

Main controls located on the canister body. Power Nozzle has automatic height adjustment.

Canister Controls: On/Off switch, Suction Power Dial (Min to Max), Cord Rewind Button, Bag Full Indicator Light.

Power Nozzle: On/Off switch for brush roll (for delicate rugs), headlight, automatic carpet height sensor. Suction Power: Adjust dial for delicate drapes (low), general floors (medium), or deep carpet cleaning (high). Bag Indicator: Red light illuminates when bag is full and needs replacement.

Using Attachments

Each attachment is designed for specific cleaning tasks. Ensure vacuum is OFF when changing tools.

1. For carpets: Use the Power Nozzle. The brush roll agitates fibers for deep cleaning.
2. For hard floors: Use the Bare Floor Brush. It prevents scattering debris.
3. For upholstery: Use the Upholstery Nozzle. Use low to medium suction.
4. For corners/edges: Use the Crevice Tool.
5. For dusting: Use the Dusting Brush for shelves, blinds, and lampshades.

Tip: For best performance, move the vacuum slowly over the area, making overlapping strokes.

Maintenance & Care

Regular maintenance ensures peak performance and longevity.

1. Replace bag: When Bag Full light comes on, or suction decreases. Use only Kenmore Type J bags.
2. Clean filters: Tap out the pre-motor filter monthly. Replace the HEPA filter every 6-12 months.
3. Check brush roll: Regularly remove hair and string from the power nozzle brush roll.
4. Inspect hose and wand: Clear any blockages if suction is weak.
5. Clean exterior: Wipe canister and attachments with a damp cloth. Do not immerse in water.

WARNING! Always unplug the vacuum before performing any maintenance.

Filtration System

The multi-stage filtration system captures dust and allergens.

Stage 1: Disposable bag captures large particles.
Stage 2: Multi-cyclonic action spins dirt away from the air stream.
Stage 3: Pre-motor foam filter protects the motor.
Stage 4: HEPA final filter traps microscopic particles before air is exhausted.

For allergy sufferers, replace the HEPA filter regularly and never use the vacuum without all filters in place.

Storage & Handling

Store in a cool, dry place. Use the cord rewind and wrap the hose neatly.

1. Rewind cord: Press the Cord Rewind button while guiding the plug.
2. Store attachments: Place all tools in the integrated caddy or hang them on the canister hooks.
3. Position: Store the vacuum in an upright position to prevent tipping.

CAUTION! Do not store near heat sources or with a full bag, as this can cause odors.

Regulatory Information

This appliance complies with relevant U.S. safety standards. The motor is protected by a thermal cut-off. Copyright © Kenmore. Kenmore is a registered trademark of Kenmore, Inc. For genuine replacement parts and bags, visit www.kenmore.com or contact customer service at 1-800-426-9225.

Troubleshooting

Reset: If motor overheats, it will shut off. Unplug, clear any blockage, and wait 30 minutes before restarting.

Service: 1-800-426-9225; www.kenmore.com