Kenmore Elite 41072310 Manual

The Kenmore Elite 41072310 is a high-performance, front-loading washing machine designed for residential use. It features a large capacity stainless steel drum, multiple wash cycles for various fabric types, energy-efficient operation, steam cleaning options, and advanced control settings. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating the Washer 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel drum, Electronic Control Panel, Detergent Dispenser, Water Inlet Valves, Drain Pump, and Vibration Reduction System.

FeatureDescription
CapacityLarge capacity for family-sized loads
Stainless Steel DrumDurable and gentle on fabrics
Wash CyclesMultiple cycles including Normal, Heavy Duty, Delicates, and Steam Clean
Control PanelLED display with touch controls
Energy EfficiencyENERGY STAR® certified
Steam OptionSanitizes and reduces wrinkles
Detergent DispenserAutomatic dispensing for liquid or powder detergent
Vibration ReductionReduces noise and movement during spin cycles
Child LockPrevents accidental changes to settings
Delay StartAllows scheduling of wash cycles

Installation

Unpack and inspect contents. Place on a level, stable floor.

  1. Remove shipping bolts: Use wrench to remove bolts from rear panel.
  2. Connect water supply: Attach hot and cold water hoses to corresponding valves.
  3. Connect drain hose: Secure hose to standpipe or laundry sink.
  4. Level the washer: Adjust leveling feet to ensure machine is stable.
  5. Plug into grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on washer; follow initial setup prompts.

  1. Run a cleaning cycle: Use the Tub Clean cycle with washer cleaner or bleach (no clothes).
  2. Set preferences: Use control panel to set default options like spin speed and temperature.
  3. Load detergent: Fill detergent, bleach, and fabric softener dispensers.
  4. Test a load: Run a small load to ensure proper operation.

CAUTION! Ensure washer is level to prevent excessive vibration during spin cycles.

Specifications

Controls and Settings

Access settings via the control panel. Power Button: Turns washer on/off. Cycle Selector Knob: Choose wash cycle (Normal, Heavy Duty, Delicates, etc.).

Buttons: Start/Pause, Temperature, Spin Speed, Steam, Delay Start, Options (Extra Rinse, Pre-Wash), Child Lock.

Cycle Settings: Adjust temperature (Cold, Warm, Hot), spin speed (Low, Medium, High), and options for each cycle. Steam: Activates steam function for sanitizing or wrinkle reduction. Delay Start: Set delay from 1 to 24 hours. Child Lock: Press and hold for 3 seconds to enable/disable.

Connecting Utilities

Water Supply: Hot and cold water hoses. Drain: Drain hose to standpipe or sink. Electrical: Grounded 120V outlet.

  1. Turn off water supply before connecting hoses.
  2. Use only provided hoses or certified replacements.
  3. Ensure drain hose is secured to prevent slipping.
  4. Plug into dedicated outlet; avoid extension cords.

Tip: Check for leaks at connections after first use.

Operating the Washer

Supports various fabric types and soil levels.

  1. Load clothes: Open door, load evenly, and close securely.
  2. Add detergent: Pour into dispenser; follow manufacturer's instructions.
  3. Select cycle: Turn knob to desired cycle (e.g., Normal for everyday loads).
  4. Adjust settings: Set temperature, spin speed, and options as needed.
  5. Start: Press Start/Pause to begin cycle.
  6. Pause: Press Start/Pause to pause; press again to resume.
  7. End of cycle: Washer will beep; remove clothes promptly to reduce wrinkles.

WARNING! Do not overload washer. Balance loads to prevent vibration.

Special Features

Steam Clean: Reduces allergens and wrinkles; select Steam cycle. Sanitize Cycle: Uses high temperature to kill bacteria. Delay Start: Schedule wash to finish at desired time. Child Lock: Prevents changes during operation.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent dispenser monthly. Run Tub Clean cycle every 30 washes.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

SymptomPossible CauseCorrective Action
Washer won't startPower/doorEnsure plugged in; check circuit breaker; close door securely.
No water fillingWater supply/hosesCheck water valves are on; inspect hoses for kinks.
Excessive vibrationLeveling/loadEnsure washer is level; redistribute load evenly.
Water leaksConnections/hosesTighten hose connections; check for cracks in hoses.
Error codes on displaySystem faultRefer to error code chart in manual; reset by unplugging for 1 minute.

Reset: Unplug for 1 minute to reset control board.

Service: 1-800-469-4668; www.kenmore.com

Kenmore Elite 41072310 Manual © - All Rights Reserved 2025