Kenmore Elite 41073 Manual

The Kenmore Elite 41073 is a high-performance front-load washing machine featuring advanced cleaning technology, multiple wash cycles, energy-efficient operation, and user-friendly controls. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating the Washer 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Front-load drum, electronic control panel, detergent dispenser, water inlet valves, drain pump, and adjustable leveling feet.

Feature	Description
Capacity	4.5 cubic feet for large loads
Wash Cycles	Normal, Heavy Duty, Delicates, Quick Wash, Sanitize
Temperature Settings	Hot, Warm, Cold, Tap Cold
Spin Speeds	Multiple speed options up to 1300 RPM
Control Panel	LED display with rotary selector and touch buttons
Detergent Dispenser	Automatic dispenser for detergent, bleach, and fabric softener
Energy Efficiency	ENERGY STAR® certified
Noise Reduction	Quiet operation technology
Child Lock	Safety feature to prevent accidental changes
Delay Start	Program wash cycles up to 24 hours in advance

Installation

Unpack and inspect contents. Place on level, solid floor.

Remove shipping materials: Take out transit bolts and packing materials.
Level the washer: Adjust front leveling feet until machine is stable.
Connect water supply: Attach hot and cold water hoses to corresponding faucets.
Connect drain hose: Secure drain hose to standpipe or laundry sink.
Plug into grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on washer; follow initial setup procedure.

Run initial test cycle: Select Quick Wash cycle without laundry to clean drum.
Set preferences: Use control panel to set default temperature, spin speed, and other options.
Load detergent: Fill detergent, bleach, and fabric softener compartments as needed.
Test operation: Run a small load to ensure proper functioning.

CAUTION! Ensure washer is level to prevent excessive vibration during spin cycles.

Specifications

Model: Kenmore Elite 41073
Type: Front-load washing machine
Capacity: 4.5 cubic feet
Dimensions: 27" W x 39" H x 32" D
Voltage: 120V AC, 60Hz
Water Connections: Hot and cold water inlet
Max Spin Speed: 1300 RPM
Energy Rating: ENERGY STAR® certified
Warranty: 1-year limited parts and labor

Controls and Settings

Access settings via control panel. Front Panel: POWER, CYCLE SELECTOR, START/PAUSE, OPTIONS buttons.

Control Panel Features: LED display showing cycle time, temperature, spin speed, and options selected.

Cycle Selection: Normal, Heavy Duty, Delicates, Quick Wash, Sanitize, Rinse & Spin, Drain & Spin. Options: Extra Rinse, Pre-Wash, Delay Start, Child Lock, Soil Level (Light, Normal, Heavy). Temperature Settings: Hot, Warm, Cold, Tap Cold. Spin Speed: Adjustable from No Spin to Max Spin (1300 RPM).

Connecting Utilities

Water Supply: Hot and cold water hoses. Drain: Drain hose to standpipe or sink. Electrical: Grounded 120V outlet.

Turn off water supply before connecting hoses.
Use only new hoses; do not reuse old hoses.
Ensure drain hose is secured to prevent slipping.
Plug into dedicated circuit; avoid using extension cords.

Tip: Install water hammer arrestors if water hammer occurs.

Operating the Washer

Supports various fabric types and soil levels.

Load laundry: Open door, load clothes evenly around drum.
Add detergent: Pour detergent into appropriate dispenser compartment.
Set options: Press OPTIONS buttons for Extra Rinse, Pre-Wash, etc.
Start cycle: Press START/PAUSE to begin washing.
Pause/stop: Press START/PAUSE to pause; press and hold to cancel cycle.
Unload: Wait for door lock to release, then remove laundry.
Clean dispenser: Remove and rinse detergent dispenser regularly.

WARNING! Do not overload washer. Balance loads to prevent vibration.

Maintenance & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean drum monthly using washer cleaner or vinegar cycle.

Regular Maintenance: Clean detergent dispenser monthly. Check and clean drain pump filter quarterly. Inspect hoses annually for wear.

CAUTION! Do not use abrasive cleaners. Keep control panel dry.

Regulatory Information

UL Listed: Complies with UL safety standards. Energy Guide: Provides estimated yearly energy consumption. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/door	Ensure washer is plugged in; door is fully closed; press START firmly.
No water filling	Water supply/hoses	Check water faucets are on; inspect hoses for kinks; clean inlet screens.
Excessive vibration	Load/leveling	Redistribute load evenly; ensure washer is level; remove transit bolts.
Water not draining	Drain hose/filter	Check drain hose for obstructions; clean drain pump filter.
Error codes displayed	Various faults	Refer to error code chart in manual; unplug for 5 minutes then retry.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-469-4668; www.kenmore.com