Kenmore Elite 800 Series Vacuum Manual

The Kenmore Elite 800 Series is a high-performance upright vacuum cleaner featuring powerful suction, HEPA filtration, adjustable height settings, motorized brush roll, edge cleaning, multi-surface cleaning capabilities, large-capacity dust cup, onboard tools, and a variety of attachments for comprehensive cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Unpacking & Assembly 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Operations 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Powerhead with motorized brush roll, Handle with controls, Large-capacity dust cup with HEPA filter, Onboard tool storage, Hose and wand assembly, Various cleaning attachments.

Feature	Description
Powerful Suction Motor	Provides deep cleaning on carpets and hard floors
HEPA Filtration System	Captures 99.97% of dust and allergens
Adjustable Height Settings	5-position dial for different carpet pile heights
Motorized Brush Roll	Agitates and lifts embedded dirt from carpets
Edge Cleaning	Cleans along baseboards and edges
Multi-Surface Cleaning	Switch between carpet and hard floor settings
Large Dust Cup	Reduces frequency of emptying
Onboard Tools	Crevice tool, dusting brush, upholstery tool
Power Switch	Turns vacuum on/off
Brush Roll On/Off	Disables brush roll for hard floors

Unpacking & Assembly

Unpack all components and inspect for damage. Assemble following these steps.

Attach handle: Align handle with vacuum body and secure with provided screws.
Install wand: Insert wand into hose connector until it clicks into place.
Attach hose: Connect hose to vacuum body and wand assembly.
Mount attachments: Store tools on onboard clips or storage bag.
Plug into electrical outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brush roll during installation.

First-Time Setup

Before first use, complete these setup steps.

Check filter: Ensure HEPA filter is properly installed in dust cup.
Adjust height: Set height dial to match your flooring type (usually position 3 for medium pile).
Test functions: Turn on vacuum, test brush roll on/off switch, and check suction.
Familiarize with controls: Locate power switch, height adjustment, and brush roll control.

CAUTION! Do not use vacuum without filter installed. Ensure cord is fully unwound before operation.

Specifications

Model Series: Kenmore Elite 800 Series
Motor: High-performance 12 amp motor
Filtration: HEPA filtration system
Dust Cup Capacity: 2.0 liters
Cord Length: 25 feet
Height Settings: 5 adjustable positions
Brush Roll: Self-cleaning, removable for maintenance
Attachments: Crevice tool, dusting brush, upholstery tool, pet hair tool
Power Source: 120V AC, 60Hz
Weight: 18 pounds

Controls and Settings

Main controls located on handle and vacuum body.

Handle Controls: Power switch, Brush roll on/off button, Height adjustment dial.

Height Settings: 1 (Low pile/Bare floor) to 5 (High pile/Shag carpet). Brush Roll Control: Turn off for hard floors, drapes, or delicate rugs. Power Settings: Single speed operation with automatic suction adjustment. Indicator Lights: Filter check light (red when filter needs cleaning/replacement).

Using Attachments

Accessories for specialized cleaning tasks.

Remove wand: Press wand release button and pull wand from vacuum.
Select attachment: Choose appropriate tool for cleaning task.
Connect tool: Insert tool into end of wand or hose.
Clean: Use tool for specific areas (crevices, upholstery, dusting).
Return tools: Store attachments on onboard clips when not in use.

Tip: Turn off brush roll when using attachments above floor level.

Cleaning Operations

Proper techniques for different surfaces.

Carpet cleaning: Set appropriate height, use slow, overlapping passes.
Hard floors: Turn brush roll off, use vacuum in upright position.
Edges and corners: Use edge cleaning feature or crevice tool.
Above-floor cleaning: Use wand and attachments for furniture, stairs, ceilings.
Empty dust cup: Press release button when cup is 2/3 full.
Clean brush roll: Turn vacuum over, remove debris from brush roll regularly.

WARNING! Do not vacuum liquids, hot ashes, or sharp objects. Keep hair, loose clothing, and fingers away from brush roll.

Maintenance & Care

Regular maintenance ensures optimal performance.

Daily/Weekly: Empty dust cup after each use. Monthly: Clean HEPA filter (rinse with water, air dry 24 hours). Quarterly: Remove and clean brush roll, check for obstructions. As Needed: Check hose and wand for clogs, inspect belt for wear.

CAUTION! Always unplug vacuum before maintenance. Never use vacuum with wet filter.

Regulatory Information

UL Listed: Certified for safety in the United States and Canada. ETL Listed: Meets North American safety standards. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668. This appliance has a polarized plug (one blade wider than the other) for safety.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust cup/clogged filter	Empty dust cup; clean or replace filter; check for hose clogs.
Brush roll not spinning	Obstruction/belt issue	Remove debris from brush roll; check and replace belt if worn.
Vacuum won't turn on	Power cord/outlet issue	Check power outlet; inspect cord for damage; ensure plug is fully inserted.
Automatic shutoff	Overheating/clog	Unplug and let cool for 30 minutes; check for obstructions.
Poor carpet cleaning	Incorrect height setting	Adjust height dial; make slower passes; empty dust cup.

Reset: Unplug for 30 minutes to reset thermal protector.

Service: 1-800-469-4668; www.kenmore.com