Kenmore Elite Air Conditioner Manual

The Kenmore Elite Air Conditioner is a high-efficiency cooling unit featuring advanced temperature control, multiple fan speeds, energy-saving modes, programmable timer, remote control operation, washable air filter, dehumidification function, sleep mode, and adjustable louvers for directional airflow. Designed for residential use with standard 115V power. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Digital control panel, Remote Control, Washable filter, Exhaust vent, Adjustable louvers, Power cord.

Installation

Unpack and inspect contents. Prepare window opening.

1. Install window kit: Extend side panels to fit window width, secure with screws.
2. Place unit in window: Lift into position, ensure proper support.
3. Secure unit: Lock side panels, install support brackets.
4. Seal gaps: Use weather stripping to prevent air leaks.

WARNING! Unit is heavy; use two people for installation. Ensure window is secure before operation.

First-Time Setup

Plug into power outlet; follow initial setup.

1. Set temperature: Press POWER, use TEMP buttons to set desired cooling level.
2. Select mode: Choose COOL, FAN, DEHUMIDIFY, or ENERGY SAVER.
3. Adjust fan speed: Select LOW, MEDIUM, or HIGH.
4. Program timer: Set automatic on/off times for daily operation.

CAUTION! Ensure proper electrical outlet; do not use extension cords.

Specifications

• Cooling Capacity: 10,000 BTU.
• Room Size: Up to 450 sq. ft.
• Power Requirements: 115V, 60Hz, 9.8A.
• Energy Efficiency Ratio (EER): 12.1.
• Air Flow: 350 CFM.
• Noise Level: 55 dB on high setting.
• Filter Type: Washable mesh.
• Dimensions: 19.5" H x 25.5" W x 21" D.
• Weight: 68 lbs.
• Refrigerant: R-410A.

Controls and Settings

Access controls via control panel or remote. Front Panel: POWER, MODE, FAN SPEED, TEMP UP/DOWN, TIMER.

Remote: POWER, MODE, TEMP, FAN, TIMER, SLEEP, SWING.

Modes: COOL, FAN ONLY, DEHUMIDIFY, ENERGY SAVER. Fan Speeds: LOW, MEDIUM, HIGH, AUTO. Timer: Program up to 24 hours. Sleep: Auto temperature adjustment over 7 hours. Swing: Auto louvers movement.

Connecting to Power

Use dedicated 115V outlet. Do not use extension cords.

1. Ensure unit is properly installed in window.
2. Plug power cord directly into wall outlet.
3. Turn on at control panel or remote.

Tip: Use surge protector for added safety.

Operating Modes

Supports multiple operating modes for efficiency.

1. Cool Mode: Standard air conditioning with temperature control.
2. Fan Mode: Circulates air without cooling.
3. Dehumidify Mode: Removes moisture while slightly cooling.
4. Energy Saver: Compressor cycles off when temperature reached.
5. Sleep Mode: Gradually increases temperature overnight.
6. Timer: Program unit to turn on/off automatically.

WARNING! Do not operate below 64°F outdoor temperature.

Maintenance

Regular maintenance ensures optimal performance.

1. Clean filter every 2 weeks: Remove, wash with mild detergent, dry completely.
2. Clean exterior: Wipe with damp cloth, dry thoroughly.
3. Winter storage: Remove from window, clean, cover, store in dry place.
4. Check seals: Inspect window seals annually for air leaks.

Care & Cleaning

Unplug before cleaning. Clean filter regularly for efficiency.

CAUTION! Do not use harsh chemicals; never spray water into unit.

Regulatory Information

UL Listed; meets safety standards. Energy Star certified. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-469-4668; www.kenmore.com