Kenmore Elite Dishwasher 665.14753N510 Manual

The Kenmore Elite Dishwasher 665.14753N510 is a high-performance built-in dishwasher featuring multiple wash cycles, adjustable racks, soil sensors, quiet operation, energy-saving modes, and stainless steel tub. It includes features like heated dry, sanitize rinse, delay start, and child lock. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading and Use 7. Cycle Descriptions 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Stainless steel interior, adjustable upper rack, fold-down tines, silverware basket, control panel, detergent dispenser, rinse aid dispenser, filter system.

Feature	Description
Wash Cycles	Normal, Heavy, Light, Rinse Only, Sanitize, Delay Start
Options	Heated Dry, Hi-Temp Wash, Sani Rinse, Extra Scrub
Racks	Adjustable upper rack, fold-down tines for tall items
Sound Insulation	Quiet operation design
Soil Sensor	Automatically adjusts wash time based on soil level
Control Lock	Child safety lock feature
Display	LED cycle status indicators
Filter System	Self-cleaning filter, easy access for maintenance
Energy Star	Energy efficient certified
Warranty	1-year limited warranty

Installation

Unpack and inspect contents. Ensure proper electrical and plumbing connections.

Prepare opening: Ensure cabinet opening meets dimensions (24" width standard).
Connect water supply: Attach hot water line (120°F recommended) to inlet valve.
Connect drain hose: Use high loop or air gap installation per local codes.
Electrical connection: Connect to dedicated 120V, 15-amp circuit.
Level dishwasher: Adjust leveling legs for proper alignment.
Secure to counter: Attach mounting brackets to underside of countertop.

WARNING! Installation should be performed by qualified technician. Ensure water and electrical connections are secure before use.

First-Time Setup

Before first use, run a complete cycle without dishes.

Remove shipping materials: Check interior for all tape and protective coverings.
Load detergent: Fill main detergent cup with dishwasher detergent.
Add rinse aid: Fill rinse aid dispenser to MAX line.
Select cycle: Choose Normal cycle with Heated Dry option.
Start cycle: Close door and press START to begin cleaning cycle.
Check for leaks: Monitor connections during first few minutes of operation.

CAUTION! Use only dishwasher-specific detergents. Do not use regular dish soap.

Specifications

Model: 665.14753N510
Type: Built-in Dishwasher
Capacity: 14 place settings
Dimensions: 23.625" W x 24.5" D x 34.5" H
Water Consumption: 2.9-4.6 gallons per cycle
Power Requirements: 120V AC, 60Hz, 15A
Water Pressure: 20-120 psi
Water Temperature: 120°F minimum, 150°F maximum
Noise Level: 52 dBA
Wash Cycles: 6 cycles + options
Drying System: Heated dry with fan assist

Controls and Settings

Control Panel located on top of door interior. Cycle buttons: NORMAL, HEAVY, LIGHT, RINSE ONLY, SANITIZE. Option buttons: HEATED DRY, HI-TEMP WASH, SANI RINSE, EXTRA SCRUB, DELAY START (1-24 hours).

Operation: Press CYCLE button to select, OPTION buttons to add features, DELAY to set start time, START to begin. Control Lock: Press and hold CONTROL LOCK for 3 seconds to enable/disable.

Indicator Lights: CYCLE STATUS shows progress, SANITIZED indicates sanitize cycle completed, RINSE AID light indicates low rinse aid.

Loading and Use

Proper loading ensures optimal cleaning performance.

Scrape large food particles: Pre-rinsing not required with soil sensor.
Load lower rack: Place plates, pots, pans facing center. Avoid blocking spray arm.
Load upper rack: Place cups, glasses, bowls. Adjust rack height for tall items.
Silverware basket: Mix utensils handle up/down for better cleaning.
Add detergent: Use recommended amount based on water hardness and soil level.
Close door securely: Ensure latch engages completely.
Select cycle: Choose based on soil level and dish type.
Press START: Cycle begins after door is closed.

Tip: Do not overload dishwasher. Leave space between items for water circulation.

Cycle Descriptions

Each cycle designed for specific cleaning needs.

Cycle	Duration	Best For	Options Available
Normal	120 min	Everyday dishes, moderate soil	All options
Heavy	150 min	Pots, pans, baked-on food	Hi-Temp, Sani Rinse
Light	90 min	Lightly soiled, quick wash	Heated Dry
Rinse Only	15 min	Rinse dishes before later wash	None
Sanitize	140 min	Baby items, high-temp sanitizing	Heated Dry required

Options: Heated Dry (extends dry time), Hi-Temp Wash (increases water temp), Sani Rinse (final rinse at 155°F), Extra Scrub (increases wash pressure), Delay Start (program start 1-24 hours later).

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

Clean filter monthly: Remove lower rack, twist and lift filter assembly, rinse under water.
Check spray arms: Ensure holes are not clogged. Remove and clean if necessary.
Wipe door gasket: Clean with damp cloth to maintain seal.
Run cleaning cycle monthly: Use dishwasher cleaner or place cup of vinegar on top rack, run hot cycle.
Check rinse aid level: Refill when indicator light comes on.
Inspect drain hose: Ensure no kinks or clogs.

CAUTION! Unplug dishwasher before performing any maintenance. Do not use abrasive cleaners on interior.

Regulatory Information

UL Listed: Complies with UL Standard 749. Energy Star: Meets ENERGY STAR criteria for energy efficiency. FCC Part 15: Class B digital device. California Proposition 65 Warning: This product may contain chemicals known to cause cancer or reproductive harm. For support, visit www.kenmore.com or contact 1-800-422-1230.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dishwasher won't start	Door not closed, power issue	Ensure door latched; check circuit breaker; verify power cord connection.
Poor cleaning results	Spray arm blocked, low water temp	Check spray arms rotate freely; ensure water temp ≥120°F; use correct detergent amount.
Water not draining	Drain hose clogged, filter blocked	Check drain hose for kinks; clean filter; ensure proper installation with high loop.
Leaking water	Door gasket damaged, overfilling	Inspect door gasket; ensure proper loading; check float switch moves freely.
Unusual noise	Spray arm hitting dishes, pump issue	Rearrange load; check for foreign objects in pump area.
Detergent not dissolving	Wet detergent, dispenser issue	Keep detergent dry; check dispenser door opens during cycle.
Error codes displayed	Various system faults	Note error code (F1-F9); consult service manual; reset by turning power off/on.

Reset: Turn power off at circuit breaker for 1 minute, then restore power.

Service: 1-800-422-1230; www.kenmore.com