Kenmore Elite Dishwasher Manual 630

The Kenmore Elite Dishwasher Model 630 is a high-performance built-in dishwasher featuring multiple wash cycles, energy-saving options, adjustable racks, soil sensors, quiet operation, delay start, heated dry, sanitize rinse, and child lock. Designed for standard kitchen installation with standard electrical and plumbing connections. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Loading the Dishwasher 7. Cycle Selection & Operation 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control Panel, Upper and Lower Racks, Silverware Basket, Filter System, Detergent Dispenser, Rinse Aid Dispenser, Spray Arms, Drain Pump.

FeatureDescription
Control PanelDigital display with touch controls for cycle selection
Wash CyclesHeavy, Normal, Light, Rinse Only, China/Crystal, Sanitize
OptionsHeated Dry, Delay Start, High Temp Wash, Sani Rinse, Child Lock
Rack SystemAdjustable upper rack, fold-down tines, customizable basket
Filter SystemSelf-cleaning filter with removable parts for maintenance
Sound InsulationQuiet operation design for reduced noise
Soil SensorAutomatically adjusts wash time based on soil level
Energy Star RatedMeets energy efficiency guidelines
WarrantyLimited 1-year full warranty, 10-year tub warranty
Power Requirements120V, 60Hz, 15A dedicated circuit

Installation

Unpack and inspect contents. Ensure proper location with access to water, drain, and power.

  1. Prepare opening: Standard 24-inch width, 34-inch height, 24-inch depth.
  2. Connect water supply: Attach hot water line (120°F recommended) to inlet valve.
  3. Connect drain hose: Use high-loop or air gap installation per local codes.
  4. Electrical connection: Connect to dedicated 120V, 15A circuit with proper grounding.
  5. Level the dishwasher: Adjust leveling legs for stability.
  6. Secure to counter: Attach mounting brackets to underside of countertop.

WARNING! Installation should be performed by qualified technician. Ensure water and electrical connections are secure to prevent leaks or shock hazard.

First-Time Setup

After installation, prepare dishwasher for first use.

  1. Remove shipping materials: Check interior for foam blocks, tape, and protective film.
  2. Run initial rinse cycle: Add 2 cups white vinegar to empty dishwasher, run normal cycle without dishes.
  3. Load detergent and rinse aid: Fill detergent dispenser and rinse aid compartment.
  4. Set preferences: Configure default settings like heated dry, sound volume, etc.
  5. Test operation: Run quick rinse cycle to verify proper water fill, drainage, and heating.

CAUTION! Do not use dishwasher until all shipping materials are removed. Ensure water supply valve is fully open.

Specifications

Controls and Settings

Control Panel located on top of door. Touch-sensitive buttons with LED indicators.

Cycle Buttons: HEAVY, NORMAL, LIGHT, RINSE ONLY, CHINA/CRYSTAL, SANITIZE

Option Buttons: HEATED DRY, DELAY START (1-24 hours), HIGH TEMP WASH, SANI RINSE, CHILD LOCK

Display: Shows cycle time remaining, cycle status, and error codes.

Settings Menu: Press and hold NORMAL for 3 seconds to access: SOUND ON/OFF, RINSE AID LEVEL, DEFAULT CYCLE, RESET TO FACTORY.

Start/Reset: START button begins cycle; press and hold for 3 seconds to cancel cycle.

Loading the Dishwasher

Proper loading ensures optimal cleaning and prevents damage.

  1. Scrape food: Remove large food particles; no pre-rinsing needed with soil sensor.
  2. Lower rack: Pots, pans, plates, bowls. Face soiled surfaces toward center.
  3. Upper rack: Cups, glasses, small bowls. Secure between tines.
  4. Silverware basket: Mix utensils; place knives pointing down.
  5. Adjust racks: Upper rack can be raised/lowered for tall items.
  6. Check clearance: Ensure items don't block spray arm rotation.

Tip: Load similar items together. Place plastic items on top rack only. Do not overload.

Cycle Selection & Operation

Select cycle based on soil level and dish type.

  1. Add detergent: Use recommended dishwasher detergent. Fill main cup for wash, pre-wash cup if needed.
  2. Add rinse aid: Fill compartment; adjust dispenser setting (1-6) based on water hardness.
  3. Select cycle: Press desired cycle button (LED illuminates).
  4. Add options: Press option buttons as needed (e.g., HEATED DRY, DELAY START).
  5. Close door firmly: Dishwasher will not start if door is ajar.
  6. Press START: Cycle begins; display shows time remaining.
  7. Cycle complete: Signal sounds (if enabled). Dishes are hot; allow to cool before unloading.

Cycle Guide: HEAVY (2:30 hrs, heavily soiled), NORMAL (2:00 hrs, daily use), LIGHT (1:15 hrs, lightly soiled), RINSE ONLY (0:15 hrs, rinse only), CHINA/CRYSTAL (1:45 hrs, delicate), SANITIZE (2:15 hrs, high temp sanitizing).

Care & Maintenance

Regular maintenance ensures optimal performance and longevity.

  1. Clean filter: Remove lower rack, twist filter assembly counterclockwise, rinse under water monthly.
  2. Clean spray arms: Check for clogs in spray holes; remove debris.
  3. Clean interior: Wipe door seals and interior with damp cloth; run monthly cleaning cycle with dishwasher cleaner.
  4. Check rinse aid: Refill when indicator light comes on.
  5. Inspect drain hose: Ensure no kinks or clogs.
  6. Winterizing: If unused in freezing temps, drain water from unit.

CAUTION! Unplug dishwasher before performing maintenance. Do not use abrasive cleaners on interior.

Regulatory Information

UL Listed: Complies with UL Standard 749. Energy Star: Meets EPA energy efficiency guidelines. NSF Certified: Meets sanitation standards. California Proposition 65 Warning: Contains chemicals known to cause cancer/reproductive harm. For support, visit www.kenmore.com or contact 1-800-253-1301. Model 630 manufactured for Sears Brands, LLC.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher won't startDoor not closed, child lock on, no powerClose door firmly; check child lock status; verify power at outlet.
Poor cleaning resultsSpray arms blocked, filter clogged, low water tempClean spray arms and filter; ensure water temp ≥120°F.
Water not drainingDrain hose clogged/kinked, drain pump blockedCheck drain hose; clean pump area; ensure garbage disposal is clear.
Leaking waterDoor seal damaged, hose connections loose, overfillingInspect door seal; tighten connections; check float switch.
Unusual noiseSpray arm hitting dishes, pump obstruction, loose partsReload dishes properly; check for foreign objects; tighten mounting.
Error codes on displayVarious system faultsNote code: F1 (water fill), F2 (drain), F3 (temp), F4 (door). Unplug for 5 minutes, replug. If persists, call service.

Reset: Unplug for 5 minutes or turn off circuit breaker for 1 minute to reset control board.

Service: 1-800-253-1301; www.kenmore.com

Kenmore Elite Dishwasher Manual 630 © - All Rights Reserved 2025