Kenmore Elite Dryer HE4 Manual

The Kenmore Elite Dryer HE4 is a high-efficiency electric dryer designed for optimal fabric care and energy savings. It features multiple drying cycles, temperature settings, moisture sensing, wrinkle prevention options, and a large capacity drum. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Dryer 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Large capacity drum, electronic controls, moisture sensor, lint filter, exhaust vent, and multiple drying cycles.

Feature	Description
Moisture Sensor	Automatically detects dryness level and stops when clothes are dry
Multiple Cycles	Includes Normal, Delicates, Heavy Duty, Quick Dry, and Air Fluff
Wrinkle Prevention	Tumbles clothes periodically after cycle ends to reduce wrinkles
Temperature Settings	High, Medium, Low, and No Heat options
Large Capacity Drum	Accommodates large laundry loads efficiently
Electronic Controls	LED display and touchpad for easy operation
Lint Filter	Removable filter for easy cleaning
End-of-Cycle Signal	Audible alert when drying cycle is complete
Child Lock	Prevents accidental changes to settings
Energy Efficient	Designed to reduce energy consumption

Installation

Unpack and inspect contents. Place on level floor near electrical outlet and venting location.

Remove shipping materials: Remove all tapes, brackets, and foam from drum interior.
Connect exhaust vent: Use 4-inch diameter rigid metal ducting; avoid plastic or foil.
Level the dryer: Adjust leveling feet to ensure dryer is stable and doesn't vibrate.
Connect power: Plug into dedicated 240V outlet (for electric models).

WARNING! Dryer is heavy; use two people for moving. Ensure proper ventilation to prevent fire hazard.

First-Time Setup

Before first use, complete these steps.

Clean lint filter: Remove and clean filter with warm water; dry completely.
Run empty cycle: Run a drying cycle on high heat for 20 minutes to remove manufacturing residues.
Set preferences: Use control panel to set time, signal volume, and default options.
Test moisture sensor: Place a damp towel in dryer and run sensor cycle to verify operation.

CAUTION! Do not operate without lint filter installed. Ensure exhaust vent is not blocked.

Specifications

Model: Kenmore Elite HE4
Type: Electric Dryer
Capacity: 7.4 cubic feet
Power Requirements: 240V, 60Hz, 30A dedicated circuit
Dimensions (HxWxD): 43" x 29" x 32"
Weight: 150 lbs
Drum Material: Porcelain enamel
Control Type: Electronic with LED display
Exhaust Vent Diameter: 4 inches
Energy Star Rated: Yes

Controls and Settings

Control Panel: POWER, START/PAUSE, CYCLE SELECTOR, TEMPERATURE, OPTIONS, CHILD LOCK.

Cycles: Normal, Delicates, Heavy Duty, Quick Dry, Air Fluff, Sensor Dry, Timed Dry.

Temperature Settings: High (Cotton), Medium (Permanent Press), Low (Delicates), No Heat (Air Fluff). Options: Wrinkle Prevention, End of Cycle Signal, Moisture Level (More Dry, Less Dry). Settings: Time display (12/24 hour), volume control, default cycle memory.

Connecting to Power

Electric connection: Requires 240V, 60Hz, 30A dedicated circuit with proper grounding.

Turn off power at circuit breaker before installation.
Use 4-wire power cord (not included) rated for dryer use.
Connect wires to terminal block: Black & Red (hot), White (neutral), Green (ground).
Secure strain relief and plug into outlet.

Tip: Have installation performed by qualified electrician if unsure.

Operating the Dryer

Follow these steps for normal operation.

Load clothes: Do not overload; leave space for tumbling.
Select cycle: Turn cycle selector to desired setting.
Set temperature: Press TEMPERATURE button to choose heat level.
Set options: Select Wrinkle Prevention or other features as needed.
Start: Press START/PAUSE; dryer will begin cycle.
Monitor: LED display shows remaining time or dryness level.
Complete: Remove clothes promptly after cycle ends; clean lint filter.

WARNING! Do not dry items containing foam, rubber, or plastic. Clean lint filter after every load.

Special Features

Moisture Sensor: Automatically adjusts drying time based on moisture level. Wrinkle Prevention: Tumbles clothes periodically for up to 120 minutes after cycle. Child Lock: Press and hold OPTIONS for 3 seconds to lock controls. Energy Saving Mode: Reduces standby power consumption.

Care & Cleaning

Unplug before cleaning. Clean lint filter after every load. Wipe exterior with damp cloth; do not use abrasive cleaners.

Monthly Maintenance: Clean lint filter housing, check exhaust vent for blockage, inspect drum for damage.

CAUTION! Never operate without lint filter. Do not use solvents or harsh chemicals.

Regulatory Information

UL Listed; meets safety standards. Energy Star certified. Manufactured for Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668. Serial number located on door frame. Keep manual for future reference.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Door not closed, power issue	Ensure door is fully closed; check circuit breaker; verify power cord connection.
Clothes not drying	Lint filter clogged, vent blocked	Clean lint filter; check exhaust vent for restrictions; ensure proper heat setting.
Dryer is noisy	Objects in drum, unbalanced load	Check for coins or objects; redistribute load evenly; ensure dryer is level.
Error codes displayed	Sensor issue, overheating	Consult error code chart in manual; reset by unplugging for 5 minutes.
Cycle takes too long	Moisture sensor dirty, heavy load	Clean moisture sensor bars; reduce load size; select appropriate cycle.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-469-4668; www.kenmore.com