Kenmore Elite Dryer User Manual

The Kenmore Elite Dryer is a high-performance electric or gas dryer featuring multiple drying cycles, temperature settings, moisture sensing, wrinkle guard, and advanced fabric care options. It includes a large capacity drum, durable stainless steel construction, and user-friendly controls. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating the Dryer 8. Advanced Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Large capacity stainless steel drum, electronic control panel, moisture sensors, lint filter, exhaust vent, and multiple drying cycles.

Feature	Description
Drying Cycles	Auto Dry, Timed Dry, Delicates, Heavy Duty, Air Fluff
Temperature Settings	High, Medium, Low, No Heat
Moisture Sensor	Automatically stops when clothes are dry
Wrinkle Guard	Tumbles clothes periodically after cycle ends
Control Panel	LED display, cycle selection knob, start/pause button
Lint Filter	Removable front-loading filter for easy cleaning
Drum Light	Interior light for visibility when loading/unloading
Child Lock	Prevents accidental changes to settings
End-of-Cycle Signal	Audible alert when drying is complete
Power Source	Electric (240V) or Gas (natural/LP) models available

Installation

Unpack and inspect contents. Place on level floor near power source and venting.

Remove shipping materials: Take off tape, bolts, and brackets securing drum.
Connect exhaust vent: Use rigid or flexible metal duct (4-inch diameter).
Connect power: For electric models, connect to dedicated 240V outlet. For gas models, connect gas line with shut-off valve.
Level the dryer: Adjust leveling feet to prevent vibration.

WARNING! Dryer is heavy; use two people for moving. Ensure proper ventilation to prevent fire hazard.

First-Time Setup

After installation, perform initial setup.

Check installation: Ensure all shipping materials removed, vent connected securely.
Test run: Run empty on Air Fluff cycle for 10 minutes to remove dust.
Set preferences: Adjust signal volume, display brightness if available.
Read safety instructions: Review manual for fabric care and safety warnings.

CAUTION! Do not use without removing shipping bolts. Keep area around dryer clear of flammable materials.

Specifications

Capacity: 7.4 cubic feet.
Power Requirements: Electric: 240V, 30A; Gas: 120V for controls, gas line required.
Dimensions: 27" W x 29" D x 43" H.
Drum Material: Stainless steel.
Control Type: Electronic with rotary knob and buttons.
Vent Type: Rear exhaust (4-inch).
Weight: 130 lbs (approx.).
Warranty: 1-year limited parts and labor.

Controls and Settings

Control Panel: Cycle selection knob, START/PAUSE button, temperature buttons, options buttons.

Cycles: Auto Dry (uses moisture sensor), Timed Dry (15-120 minutes), Delicates, Heavy Duty, Air Fluff, Quick Dry, Sanitize.

Temperature: High (Cotton), Medium (Permanent Press), Low (Delicates), No Heat (Air Fluff). Options: Wrinkle Guard, Signal Volume, Child Lock, End-of-Cycle Signal. Display: Shows remaining time, cycle status, error codes.

Connecting to Power

Electric: Use 3-prong or 4-prong cord (check local codes). Gas: Connect to gas supply with approved flexible connector.

Turn off power/gas at main supply before connecting.
For electric: Connect wires to terminal block (L1, L2, Neutral, Ground).
For gas: Apply pipe thread sealant, tighten connections, check for leaks with soap solution.
Plug in power cord or turn on gas supply.

Tip: Have connections performed by qualified technician if unsure.

Operating the Dryer

Supports various fabrics and load sizes.

Load clothes: Do not overload; leave space for tumbling.
Select cycle: Turn knob to desired cycle (e.g., Auto Dry for mixed loads).
Set temperature: Press TEMP button to choose setting.
Add options: Press WRINKLE GUARD or other option buttons if desired.
Start: Press START/PAUSE. Display shows estimated time.
Pause/stop: Press START/PAUSE to pause; turn knob to OFF to cancel.
Unload: Remove clothes promptly to reduce wrinkling.
Clean lint filter: Clean after every load.

WARNING! Do not dry items containing foam, rubber, or plastic. Clean lint filter regularly to prevent fire.

Advanced Features

Moisture Sensor: Automatically adjusts drying time based on dampness. Wrinkle Guard: Tumbles clothes intermittently for up to 120 minutes after cycle. Sanitize Cycle: Uses high heat to reduce allergens and bacteria. Child Lock: Press and hold START and TEMP for 3 seconds to lock controls.

Care & Cleaning

Unplug or turn off gas before cleaning. Wipe exterior with damp cloth. Clean lint filter after each load. Check exhaust vent every 6 months for lint buildup.

CAUTION! Do not use abrasive cleaners. Ensure venting is clear to prevent overheating.

Regulatory Information

UL listed; meets safety standards for household appliances. For electric models, complies with NEC codes. Gas models certified by ANSI. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Door open/power	Close door securely; check power cord; ensure circuit breaker on.
No heat	Settings/gas supply	Check temperature setting; for gas, ensure gas valve on and pilot lit.
Clothes too wet	Overloading/vent	Reduce load size; clean lint filter; check vent for blockage.
Unusual noise	Foreign objects	Check for coins, buttons in drum; ensure dryer is level.
Error code on display	Sensor/control issue	Refer to manual for code meaning; reset by unplugging for 1 minute.

Reset: Unplug for 1 minute to reset electronic controls.

Service: 1-800-469-4668; www.kenmore.com