Kenmore Elite Model 795 Manual

The Kenmore Elite Model 795 is a high-performance refrigerator featuring advanced temperature control, energy-efficient operation, adjustable shelving, ice and water dispenser, humidity-controlled crispers, door alarms, and diagnostic systems. Designed for household use with 120V AC power. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Using Ice & Water Dispenser 8. Temperature Management 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dual cooling system, electronic temperature controls, ice maker, water filter, adjustable glass shelves, humidity-controlled crispers, door alarm, energy saver mode.

Feature	Description
Dual Cooling System	Separate cooling for fridge and freezer compartments
Electronic Controls	Digital temperature display and settings
Ice Maker	Automatic ice production and storage
Water Filter	Removes impurities from dispenser water
Adjustable Shelves	Customizable storage space
Humidity Crispers	Preserves freshness of fruits and vegetables
Door Alarm	Alerts if door is left open
Energy Saver Mode	Reduces power consumption
Diagnostic Display	Shows error codes for troubleshooting
Power Cord	Standard 3-prong plug for 120V outlet

Installation

Unpack and inspect contents. Position on level floor with proper clearance.

Remove packaging: Take off all tape, foam, and protective covers.
Level the unit: Adjust front leveling legs for stability.
Clearance: Allow 2 inches minimum on sides and back for ventilation.
Connect power: Plug into dedicated 120V grounded outlet.
Water connection: For ice/water dispenser, connect to cold water line.

WARNING! Refrigerator is heavy; use two people for moving. Ensure floor can support weight.

First-Time Setup

Plug in refrigerator; allow 24 hours for cooling before loading food.

Set temperatures: Use control panel to set fridge (37°F) and freezer (0°F).
Install water filter: Remove cap, insert filter, run water to purge air.
Activate ice maker: Lift arm to ON position; first batch may take 24 hours.
Adjust shelves: Configure based on storage needs.
Test door alarm: Leave door open for 3 minutes to verify alarm sounds.

CAUTION! Do not overload shelves. Allow space for air circulation.

Specifications

Model: Kenmore Elite 795.
Type: French door refrigerator with bottom freezer.
Capacity: 25 cubic feet total.
Cooling System: Dual evaporator, frost-free.
Controls: Electronic touchpad with digital display.
Water Filter: EveryDrop® series, replace every 6 months.
Ice Production:Up to 4 lbs per day.
Power: 120V AC, 60Hz, 7.5 amps.
Dimensions: 36" W x 70" H x 34" D.
Weight: 350 lbs.

Controls and Settings

Control panel located inside on upper right. Buttons: TEMPERATURE, ICE TYPE, LOCK, RESET, ALARM.

Temperature Settings: Fridge (34-46°F), Freezer (-6 to 6°F). Ice Type: Cubed or crushed. Lock: Child lock for dispenser. Alarm: Door ajar and temperature alarms. Energy Saver: Reduces condensation in humid environments.

Display shows set temperatures, filter status, error codes. Press and hold LOCK for 3 seconds to enable/disable control lock.

Connecting Water Supply

Required for ice maker and water dispenser. Use 1/4" copper tubing or approved plastic line.

Turn off main water supply.
Connect water line to cold water pipe using saddle valve.
Route line to refrigerator connection at bottom rear.
Connect to refrigerator inlet; tighten with wrench.
Turn on water; check for leaks.
Flush line by dispensing water for 3 minutes.

Tip: Use manufacturer-approved water line kit. Ensure no kinks in tubing.

Using Ice & Water Dispenser

Dispenser on front door provides ice and filtered water.

Select ice type: Press ICE TYPE for cubed or crushed.
Dispense ice: Press glass against paddle; release to stop.
Dispense water: Press glass against water paddle.
Lock: Press LOCK to disable dispenser (indicator light on).
Replace filter: When FILTER light illuminates, replace filter.

WARNING! Do not use without water filter installed. Children should not operate without supervision.

Temperature Management

Optimal temperatures: Fridge 37°F, Freezer 0°F. Adjust using TEMPERATURE button.

Energy Saver: Use in low-humidity environments to reduce condensation. Door Alarm: Sounds after 3 minutes if door ajar. Quick Cool: Rapidly cools fridge compartment for new groceries. Vacation Mode: Sets fridge to minimal cooling when away.

Care & Cleaning

Unplug before cleaning interior. Use mild detergent and warm water; rinse and dry.

Exterior: Clean with soft cloth and mild cleaner. Interior: Remove shelves and drawers; wash separately. Condenser coils: Vacuum every 6 months. Door seals: Wipe clean to maintain seal.

CAUTION! Do not use abrasive cleaners or sharp objects. Never pour water over controls.

Regulatory Information

UL listed; meets NSF/ANSI standards for food equipment. Energy Star® certified. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668. Manufactured for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Not cooling	Power/controls	Check power cord; ensure temperature set correctly; allow 24 hours for initial cool.
Water not dispensing	Filter/line	Replace water filter; check water supply valve; purge air from line.
Ice maker not working	Arm position/supply	Ensure arm is down; check water connection; wait 24 hours for first batch.
Display error codes	System fault	Refer to manual code list; unplug for 5 minutes then restart.
Excessive frost	Door seal/temperature	Check door seals; ensure proper temperature settings; defrost if needed.

Reset: Unplug for 5 minutes, then plug back in.

Service: 1-800-469-4668; www.kenmore.com