Kenmore Elite Refrigerator Model 795 Manual

The Kenmore Elite Model 795 is a premium side-by-side refrigerator featuring advanced temperature management, a through-the-door ice and water dispenser, adjustable glass shelves, humidity-controlled crispers, a gallon door storage system, and energy-efficient LED lighting. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using the Ice & Water Dispenser 7. Temperature Management 8. Cleaning & Maintenance 9. Energy Saving Tips 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Side-by-side design, through-the-door dispenser, adjustable shelving, humidity-controlled crispers, ice maker, water filter, and digital temperature controls.

Feature	Description
Through-the-Door Dispenser	Provides ice and chilled water without opening the door
Adjustable Glass Shelves	Customizable storage for items of various heights
Humidity-Controlled Crispers	Preserves freshness of fruits and vegetables
Gallon Door Storage	Holds large containers in the door bins
Ice Maker	Automatic ice production with adjustable settings
Water Filtration System	Reduces impurities for cleaner ice and water
LED Interior Lighting	Energy-efficient, bright illumination
Digital Temperature Controls	Precise settings for refrigerator and freezer compartments
Energy Star Certified	Meets energy efficiency guidelines
Door Alarm	Alerts if door is left open

Installation

Unpack and inspect contents. Ensure proper clearance and leveling.

Position the refrigerator: Allow at least 2 inches of clearance on all sides for ventilation.
Level the unit: Adjust the front leveling legs to ensure doors close properly.
Connect water line: For ice maker and water dispenser, connect to a cold water supply line.
Plug into a dedicated 120V AC outlet.
Allow 24 hours for the refrigerator to reach optimal temperature before loading food.

WARNING! Refrigerator is heavy; use two people for moving. Ensure water line connections are secure to prevent leaks.

First-Time Setup

After installation, follow these steps to initialize your refrigerator.

Power on: Plug in the unit. The interior lights and control panel should illuminate.
Set temperatures: Use the digital controls to set refrigerator to 37°F (3°C) and freezer to 0°F (-18°C).
Activate ice maker: Lift the wire signal arm to the "on" position. Discard the first batch of ice.
Install water filter: Insert and flush the filter according to instructions.
Load food: Arrange items with proper air circulation in mind.

CAUTION! Do not overload shelves. Ensure doors can close and seal completely.

Specifications

Model: Kenmore Elite 795 (Side-by-Side)
Capacity: 25 cu. ft. total (14.5 cu. ft. refrigerator, 10.5 cu. ft. freezer)
Dimensions (HxWxD): 69" x 36" x 34"
Door Swing: Reversible doors (left or right hinge)
Defrost System: Frost-free for both compartments
Filter Type: EveryDrop® Ice & Water Filter EDR1RXD1 (recommended)
Power Requirements: 120V AC, 60Hz, 6 Amps
Energy Consumption: 650 kWh/year (estimated)
Warranty: 1-year full, 5-year sealed system, 10-year compressor

Controls and Settings

The control panel is located inside the refrigerator compartment on the upper right wall.

Display Buttons: TEMPERATURE SET, FILTER RESET, LOCK (child lock), ALARM RESET.

Temperature Settings: Adjust refrigerator (34°F to 46°F) and freezer (-5°F to 5°F) independently. Quick Cool/Freeze: Temporarily boosts cooling for new loads. Filter Indicator: Alerts when to replace the water filter (approximately every 6 months). Door Alarm: Sounds if door is ajar for more than 3 minutes. Control Lock: Prevents accidental setting changes.

Using the Ice & Water Dispenser

Dispenser is located on the freezer door.

To dispense water: Press a glass against the water paddle.
To dispense ice: Select cubed or crushed ice (if equipped) and press the glass against the ice paddle.
To turn off ice production: Lower the wire signal arm in the ice bucket.
To change the water filter: Twist old filter counterclockwise, insert new filter, and run 2 gallons of water through to flush.

Tip: For first use or after filter change, flush the system to remove air and carbon fines.

Temperature Management

For optimal food preservation and energy efficiency.

Recommended settings: Refrigerator at 37°F, Freezer at 0°F.
Allow hot food to cool before placing inside.
Do not block air vents inside the compartments.
Use the Quick Cool feature for large grocery loads.
Check door seals regularly for tight closure.

WARNING! Temperature fluctuations can spoil food. Monitor with an appliance thermometer if concerned.

Cleaning & Maintenance

Unplug before cleaning interior components. Use mild soap and water; avoid abrasive cleaners.

Interior: Clean shelves and bins every month.
Exterior: Wipe with a soft, damp cloth. Clean the dispenser area to prevent buildup.
Condenser Coils: Vacuum the coils at the rear or bottom every 6 months for efficiency.
Door Seals: Wipe with a damp cloth to remove debris.
Defrost Drain: Check and clear if necessary (frost-free models rarely need this).

CAUTION! Do not use sharp objects to remove ice. Never clean with flammable fluids.

Energy Saving Tips

Maximize efficiency and reduce operating costs.

Ensure the unit is level and doors seal properly.
Set temperatures to recommended levels, not colder.
Keep condenser coils clean.
Allow hot food to cool before storing.
Organize contents to minimize door open time.
Locate away from heat sources like ovens or direct sunlight.

Regulatory Information

UL Listed. Meets U.S. Department of Energy energy conservation standards. This product contains fluorinated greenhouse gases covered by the Kyoto Protocol. For disposal, consult local regulations. Refrigerant type: R-600a (isobutane), a flammable gas. Service must be performed by a qualified technician. For support, visit www.kenmore.com or contact 1-800-536-6247.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Refrigerator is warm	Power outage, controls set incorrectly, dirty coils	Check power; verify temperature settings; clean condenser coils.
Freezer is not cold enough	Door ajar, overloaded, faulty seal	Ensure door closes fully; organize contents; inspect door gasket.
Ice maker not producing ice	Water supply off, filter clogged, signal arm down	Turn on water supply; replace filter; raise signal arm.
Water dispenser not working	Kinked line, frozen line, clogged filter	Check water line for kinks; thaw if frozen; replace filter.
Unusual noise	Unit not level, items touching rear wall, fan obstruction	Level the refrigerator; rearrange contents; check for obstructions near fan.
Water leaking on floor	Clogged defrost drain, loose water connection	Clear defrost drain tube; tighten water line connections.
Control panel unresponsive	Child lock on, power issue	Disable control lock; check circuit breaker and power cord.

Reset: Unplug for 5 minutes, then plug back in to reset control board.

Service: 1-800-536-6247; www.kenmore.com