Kenmore Elite Stove Manual Parts List

The Kenmore Elite Stove is a high-performance kitchen appliance featuring multiple cooking zones, convection oven capabilities, self-cleaning functions, digital controls, and durable stainless steel construction. This manual provides a comprehensive parts list for identification, maintenance, and replacement. Below are key sections for safety, model identification, cooktop parts, oven parts, control panel components, installation hardware, and ordering information.

1. Model Identification & Safety 2. Cooktop Components 3. Oven Interior Parts 4. Control Panel & Electronic Parts 5. Installation Hardware 6. Burner & Heating Elements 7. Door & Handle Assembly 8. Cleaning & Maintenance Parts 9. Troubleshooting Common Issues 10. Parts Ordering & Warranty

Model Identification & Safety

Locate the model and serial number tag, typically found inside the oven door frame, on the back panel, or along the side of the frame. This information is required for ordering correct parts.

Item	Description
Model Number	Example: 790.XXXXXXX (varies by series)
Serial Number	Unique identifier for manufacturing date
Voltage Rating	120V/240V, 60Hz (verify before installation)
Gas/Electric Type	Specify fuel type when ordering parts

WARNING! Always disconnect power (circuit breaker) or gas supply before inspecting or replacing any parts. Use only Kenmore-approved replacement parts.

Cooktop Components

Parts for the surface cooking area, including burners, grates, and drip bowls.

Surface Burner Caps & Heads: For gas models; ensure correct size (small/large).
Burner Grates: Porcelain-coated or cast iron; set of 2-4 depending on model.
Drip Pans/Bowls: Removable aluminum or porcelain bowls under burners.
Igniter Electrodes: Spark ignition components for gas burners.
Knob Assemblies: Control knobs for each burner (includes shaft and cap).

Note: For electric smoothtop models, refer to "Heating Elements" section.

Oven Interior Parts

Components located inside the oven cavity.

Oven Racks: Chrome-plated wire racks (typically 2); part numbers vary by size.
Broil Element: Upper heating element for broiling.
Bake Element: Lower heating element for baking.
Convection Fan & Motor: For models with convection cooking.
Oven Light Bulb: 40-watt appliance bulb (socket included in some kits).
Oven Door Gasket: Heat-resistant seal around door perimeter.
Temperature Sensor: Probe that monitors oven temperature.

Control Panel & Electronic Parts

Digital displays, touchpads, and electronic control boards.

Front Panel: POWER, OVEN LIGHT, CLOCK/TIMER, CLEAN, CONVECTION, DELAY START.

Electronic Components: Main Control Board, Touchpad Assembly, Display Screen, Wiring Harness, Thermal Fuse, Door Lock Motor (for self-cleaning models).

Settings: Clock/Timer, Temperature Calibration, Clean Cycle Settings, Child Lock, Diagnostic Mode (enter by pressing specific button sequences).

Installation Hardware

Mounting brackets, screws, bolts, and connectors for proper installation.

Turn off power/gas at source before installation.
Anti-tip bracket kit (included with new units; required for safety).
Gas line connector (flexible hose) and shut-off valve for gas models.
Power cord kit (3-prong or 4-prong) for electric models.
Mounting screws for securing to cabinetry.

Tip: Refer to the installation manual for specific torque specifications and clearances.

Burner & Heating Elements

Electric coil or smoothtop elements and gas burner assemblies.

Electric Coil Elements: Plug-in spiral elements (6-inch, 8-inch sizes).
Smoothtop Radiant Elements: Ceramic glass surface elements.
Gas Burner Valves: Control gas flow to each burner.
Burner Base: Holds cap and distributes flame.
Spark Module: Generates ignition spark for all burners.

WARNING! Do not operate with missing or damaged drip bowls. Ensure elements are cool before handling.

Door & Handle Assembly

Oven door components including glass, hinges, and handles.

Door Parts: Outer Door Panel, Inner Glass Panel, Door Gasket, Hinge Assemblies (left/right), Door Springs, Handle Screws, Door Latch Assembly.

CAUTION! The oven door is heavy. Use two people for removal. Glass panels are not serviceable separately on some models.

Cleaning & Maintenance Parts

Parts related to the self-cleaning cycle and routine maintenance.

Door Lock Kit: For self-cleaning models; includes motor and switch.
Oven Vent Hood: Removable cover for the rear vent.
Drip Tray: Catches spills under the lower panel.
Knob Inserts: Replacement markings for control knobs.
Light Lens Cover: Protects oven light bulb.

CAUTION! Do not use oven cleaners on self-cleaning models. Use only mild soap and water on exterior surfaces.

Troubleshooting Common Issues

Symptom	Possible Cause	Part to Check/Replace
Burner won't ignite (gas)	Clogged ports, faulty igniter	Burner cap/head, igniter electrode, spark module.
Oven not heating	Failed heating element	Bake or broil element, temperature sensor, control board.
Uneven cooking	Faulty convection fan	Convection fan motor, fan blade.
Error codes on display	Electronic fault	Control board, wiring harness, thermal fuse.
Door not sealing	Worn gasket	Oven door gasket.

Reset: Disconnect power for 1 minute to reset electronic controls.

Parts Ordering & Warranty

Kenmore parts are available through authorized dealers and the Sears Parts Direct website. Standard limited warranty: 1 year parts and labor from date of purchase. Extended warranties may apply to certain components.

For support, visit www.searspartsdirect.com or contact Kenmore customer service at 1-800-469-4663. Have your model and serial numbers ready.