Kenmore Elite Top Load Washer User Manual

The Kenmore Elite Top Load Washer is a high-efficiency washing machine featuring multiple wash cycles, adjustable settings, large capacity drum, energy-saving technology, and advanced cleaning performance. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control Panel, Large Capacity Drum, Agitator or Impeller, Water Inlet Valves, Drain Pump, Leveling Feet, Power Cord.

Installation

Unpack and inspect contents. Place on level, solid floor.

1. Remove shipping materials: Take out transit bolts and packing materials.
2. Level the washer: Adjust leveling feet to prevent vibration.
3. Connect water supply: Attach hot and cold water hoses to faucets.
4. Connect drain hose: Secure to standpipe or laundry sink.
5. Plug into grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on washer; follow initial setup prompts.

1. Run a test cycle: Select Clean Washer cycle or run empty hot wash.
2. Set preferences: Use control panel to set default temperature, spin speed.
3. Calibrate: Allow washer to complete initial calibration cycle.
4. Load laundry: Sort clothes and load according to capacity guidelines.

CAUTION! Do not overload washer. Follow fabric care labels.

Specifications

• Capacity: 4.5 - 5.3 cu. ft. (varies by model).
• Dimensions: Standard width 27 inches, height varies.
• Voltage: 120V AC, 60Hz.
• Water Connections: Hot and cold water inlet hoses.
• Drain Hose: Standard 1.25-inch diameter.
• Cycle Options: Normal, Heavy Duty, Delicates, Quick Wash, Bulky Items, etc.
• Spin Speeds: Multiple speeds up to 1300 RPM.
• Noise Level: Varies by model and cycle.
• Warranty: 1-year limited warranty on parts and labor.

Controls and Settings

Access settings via control panel buttons and dial.

Control Panel: POWER, CYCLE SELECTION KNOB, START/PAUSE, OPTIONS (Temperature, Spin Speed, Soil Level), DELAY START, CHILD LOCK.

Cycle Selection: Turn knob to choose wash cycle. Options: Adjust temperature (Hot, Warm, Cold), spin speed (High, Medium, Low, No Spin), soil level (Heavy, Normal, Light). Special Features: Delay Start (1-24 hours), Pre-Wash, Extra Rinse, Deep Fill. Settings: Default settings can be saved for frequent cycles.

Connecting Utilities

Water Supply: Hot and cold water hoses. Drain: Standpipe or laundry sink. Electrical: Grounded outlet.

1. Turn off water supply before connecting hoses.
2. Use only new hoses; do not reuse old hoses.
3. Ensure drain hose is secured to prevent slipping.
4. Plug into dedicated circuit; avoid extension cords.

Tip: Check for leaks after first connection and periodically.

Operating the Washer

Supports various fabric types and soil levels.

1. Load laundry: Open lid, load sorted clothes, close lid.
2. Add detergent: Pour into dispenser or directly into drum (as directed).
3. Select cycle: Turn knob to desired cycle.
4. Adjust settings: Set temperature, spin speed, options.
5. Start cycle: Press START/PAUSE.
6. Pause/Add item: Press START/PAUSE to pause; open lid to add item.
7. End of cycle: Signal sounds; remove laundry promptly.
8. Clean cycle: Run Self-Clean cycle monthly.

WARNING! Do not open lid during spin cycle. Keep children away from operating washer.

Maintenance & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly. Run Self-Clean cycle regularly.

CAUTION! Do not use abrasive cleaners. Keep area around washer dry.

Regulatory Information

UL Listed; complies with safety standards. Energy Star certified for energy efficiency. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Reset: Unplug for 5 minutes to reset control board.

Service: 1-800-469-4668; www.kenmore.com