Kenmore Elite Vacuum Cleaner Manual

The Kenmore Elite Vacuum Cleaner is a high-performance cleaning appliance featuring powerful suction, HEPA filtration, multiple cleaning modes, adjustable height settings, motorized brush roll, large-capacity dust bin, and various attachments for versatile cleaning. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using Attachments 7. Cleaning Modes 8. Maintenance & Care 9. Safety Information 10. Warranty Information 11. Troubleshooting

Features at a Glance

Key components: Main vacuum unit, Power cord, Telescopic wand, Motorized floor nozzle, HEPA filter, Dust bin, Crevice tool, Upholstery brush, Dusting brush.

Feature	Description
Powerful Suction	High-performance motor for deep cleaning
HEPA Filtration	Traps 99.97% of dust and allergens
Motorized Brush Roll	Automatically adjusts for different floor types
Adjustable Height	5 height settings for carpets and hard floors
Large Capacity Dust Bin	Easy-empty 2.0L container
Multiple Attachments	Tools for various cleaning needs
LED Headlights	Illuminates dark areas under furniture
On-Board Storage	Convenient attachment holders
Power Switch	Turns vacuum on/off
Cord Rewind	Automatic cord retraction

Assembly Instructions

Unpack and inspect all components. Assemble on clean, flat surface.

Attach telescopic wand: Insert into vacuum body until it clicks.
Connect floor nozzle: Align with wand end and push until secure.
Install HEPA filter: Remove filter cover, insert filter, replace cover.
Attach hose: Connect to vacuum body port.
Store attachments: Place tools in onboard holders.

WARNING! Ensure vacuum is unplugged during assembly. Check all connections are secure.

First-Time Setup

Prepare vacuum for initial use.

Unwind power cord: Pull cord from housing to desired length.
Adjust height: Set appropriate height for your floor type.
Test suction: Plug in, turn on, verify proper operation.
Empty dust bin: Ensure bin is empty before first use.
Check filter: Verify HEPA filter is properly installed.

CAUTION! Keep hair, loose clothing, and fingers away from moving parts.

Specifications

Model: Kenmore Elite Series
Power: 12.0 Amps, 120V AC, 60Hz
Suction Power: 200 Air Watts
Dust Bin Capacity: 2.0 Liters
Filtration: HEPA filter (99.97% efficiency)
Cord Length: 30 feet
Weight: 18.5 pounds
Height Settings: 5 adjustable positions
Warranty: 5-year limited warranty

Controls and Settings

Main controls located on vacuum body. Power switch: Turns vacuum on/off. Height adjustment: Dial with 5 settings (1-lowest pile, 5-highest pile). Brush roll switch: Turns motorized brush on/off for delicate rugs. Suction control: Adjusts suction power for different surfaces.

LED Indicators: Power on (green), Brush roll active (blue), Full bin (red).

Settings: Carpet mode (height 3-5), Hard floor mode (height 1-2), Area rug mode (brush roll off), Maximum suction (for deep cleaning).

Using Attachments

Attachments store on vacuum body. Crevice tool: For tight spaces, corners, edges. Upholstery brush: For furniture, stairs, car interiors. Dusting brush: For delicate surfaces, blinds, shelves. Extension wands: For high reach cleaning.

Turn off vacuum before changing attachments.
Remove hose from storage clip.
Insert desired attachment into hose end.
Select appropriate suction setting.
Clean area, then return attachment to storage.

Tip: Use lower suction for delicate fabrics and curtains.

Cleaning Modes

Multiple modes for different cleaning needs.

Automatic mode: Vacuum adjusts suction based on floor type.
Manual mode: User selects specific settings.
Spot cleaning: Concentrated cleaning for small areas.
Edge cleaning: Special setting for baseboards and edges.
Pet hair mode: Enhanced suction for pet hair removal.
Allergen mode: Maximum filtration for allergy sufferers.

WARNING! Do not vacuum water, liquids, or wet debris.

Maintenance & Care

Regular maintenance ensures optimal performance.

Empty dust bin: When full indicator lights or after each use.
Clean filters: Wash pre-motor filter monthly; replace HEPA filter every 6-12 months.
Clear brush roll: Remove hair and threads weekly.
Check hose: Remove blockages if suction decreases.
Inspect cord: Check for damage before each use.

CAUTION! Unplug vacuum before performing any maintenance.

Safety Information

Important safety precautions for proper use.

Always unplug before maintenance or attachment changes
Do not use with damaged cord or plug
Keep away from water and wet surfaces
Do not vacuum burning or smoking materials
Keep hair, loose clothing, and fingers from moving parts
Use only Kenmore replacement parts and filters
Store in dry location away from children

Warranty Information

Kenmore Elite vacuum cleaners come with a 5-year limited warranty covering defects in materials and workmanship. Warranty does not cover normal wear, misuse, or unauthorized repairs. For warranty service, contact Kenmore Customer Support at 1-800-426-9225 or visit www.kenmore.com. Keep original receipt as proof of purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust bin or clog	Empty bin; check hose and nozzle for blockages
Brush roll not spinning	Obstruction or belt issue	Clear hair/debris; check and replace belt if worn
Vacuum won't turn on	Power issue or switch problem	Check outlet; ensure cord is fully unwound; test switch
Unusual noise	Foreign object in fan or motor	Turn off immediately; inspect for and remove objects
Overheating	Clogged filter or blocked airflow	Clean filters; ensure all passages are clear
Cord won't retract	Retraction mechanism issue	Manually rewind cord; check for obstructions in housing

Reset: Unplug for 30 minutes if vacuum overheats.

Service: 1-800-426-9225; www.kenmore.com