Kenmore Elite Vacuum Manual

The Kenmore Elite vacuum cleaner is a high-performance household cleaning appliance designed for powerful suction, advanced filtration, and versatile cleaning on various surfaces. It features multiple attachments, adjustable height settings, HEPA filtration, bagless or bagged models, motorized brush rolls, and intuitive controls. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Main vacuum unit, power cord, hose assembly, wand, floor nozzle, motorized brush, dust cup or bag compartment, HEPA filter, and various cleaning attachments.

Assembly & Setup

Unpack all components and inspect for damage. Assemble according to instructions.

1. Attach wand to vacuum body: Insert wand into socket until it clicks.
2. Connect hose: Attach hose to wand and vacuum inlet.
3. Install floor nozzle: Click nozzle onto wand end.
4. Install filters: Place HEPA filter and pre-motor filter as directed.
5. Plug into appropriate electrical outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep fingers away from brush roll during installation.

First-Time Use

Before first use, perform initial setup and test operation.

1. Check all connections: Ensure wand, hose, and nozzle are securely attached.
2. Adjust height setting: Set appropriate height for your carpet type.
3. Test suction: Turn on vacuum and verify proper suction and brush roll operation.
4. Empty dust cup: Ensure dust cup is empty before first use.
5. Familiarize with controls: Locate power switch, suction control, and cord rewind.

CAUTION! Do not vacuum wet surfaces or large objects. Keep hair, strings, and cords away from brush roll.

Specifications

• Model Series: Kenmore Elite (various model numbers)
• Power: 12 amp motor, 120V AC, 60Hz
• Filtration: HEPA filtration system with washable filters
• Cord Length: 25-30 feet (depending on model)
• Dust Capacity: 1.5-2.5 liters (bagless models)
• Weight: 15-20 pounds
• Noise Level: 70-75 dB
• Warranty: Limited 1-year warranty on parts and labor
• Attachments Included: Crevice tool, upholstery nozzle, dusting brush, extension wands

Controls and Settings

Main controls located on vacuum body. Additional features accessible through buttons and dials.

Primary Controls: POWER switch, SUCTION CONTROL dial, HEIGHT ADJUSTMENT lever, CORD REWIND button, BRUSH ROLL ON/OFF switch (select models).

Settings: Carpet height (Low, Medium, High, Bare Floor), Suction power (Min, Medium, Max), Brush roll engagement (On/Off for hard floors). Indicators: Filter check light, Bag full indicator (bagged models), Brush roll jam indicator.

Attachments & Accessories

Various tools for specialized cleaning tasks. Store on-board when not in use.

1. Crevice Tool: Cleans tight spaces, corners, and along edges.
2. Upholstery Nozzle: Gently cleans furniture, curtains, and car interiors.
3. Dusting Brush: Removes dust from delicate surfaces, blinds, and lampshades.
4. Extension Wands: Provide reach for high ceilings and under furniture.
5. Pet Tool: Specialized attachment for removing pet hair from fabrics.

Tip: Ensure attachments click securely into place before use.

Cleaning Modes & Surfaces

Optimize cleaning for different surfaces by adjusting settings.

1. Carpets: Use medium to high height setting with brush roll engaged.
2. Hard Floors: Use bare floor setting or turn off brush roll.
3. Area Rugs: Use appropriate height setting; fringes may require brush roll off.
4. Above-Floor Cleaning: Attach appropriate tool for furniture, stairs, or ceilings.
5. Delicate Surfaces: Reduce suction power for curtains or delicate upholstery.

WARNING! Do not vacuum sharp objects, liquids, or hot ashes. Avoid vacuuming loose cords or strings.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Empty dust cup: Empty when full or after each use (bagless models).
2. Clean filters: Wash HEPA and pre-motor filters every 3 months or as needed.
3. Check brush roll: Remove tangled hair and debris regularly.
4. Inspect hose and attachments: Clear any clogs and clean as needed.
5. Store properly: Wind cord, detach hose and wand, store in dry location.

CAUTION! Unplug vacuum before performing any maintenance. Allow filters to dry completely before reinstalling.

Safety Information

Important safety precautions to prevent injury or damage.

• Always unplug before maintenance or when not in use.
• Do not use with damaged cord or plug.
• Keep vacuum away from water and wet surfaces.
• Do not pick up flammable liquids or burning materials.
• Keep hair, loose clothing, and fingers away from moving parts.
• Use only Kenmore-approved bags and filters.
• Do not use extension cords unless absolutely necessary.

Warranty & Support

Kenmore Elite vacuums come with a limited warranty. For support, contact Kenmore customer service.

Warranty Coverage: 1-year limited warranty on parts and labor from date of purchase. Proof of purchase required. Exclusions: Normal wear, misuse, commercial use, unauthorized repairs. Customer Support: 1-800-426-9225 or visit www.kenmore.com. Replacement Parts: Available through authorized dealers or Kenmore website.

Troubleshooting

Reset: Unplug for 10 minutes if vacuum overheats or malfunctions.

Service: 1-800-426-9225; www.kenmore.com