Kenmore Elite Washer Manuals Washing Machine

The Kenmore Elite washing machine is a high-performance front-load washer offering advanced cleaning technology, multiple wash cycles, energy efficiency, and user-friendly controls. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating the Washer 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-load drum, Control Panel, Detergent Dispenser, Water Inlet Valves, Drain Pump, Door Lock, and Leveling Feet.

Feature	Description
Control Panel	Digital display with touch controls for cycle selection
Detergent Dispenser	Multiple compartments for detergent, fabric softener, and bleach
Water Inlet Valves	Connections for hot and cold water supply
Drain Pump	Removes water from the drum after wash cycles
Door Lock	Safety lock during operation
Leveling Feet	Adjustable feet for stability on uneven floors
POWER	Turns washer on/off
START/PAUSE	Starts or pauses the selected cycle
CYCLE SELECTION	Buttons for choosing wash programs
OPTIONS	Additional settings like temperature, spin speed, and soil level

Installation

Unpack and inspect contents. Place on a level, stable surface near water and drain connections.

Remove shipping materials: Take out transit bolts from the rear.
Connect water supply: Attach hot and cold hoses to corresponding valves; ensure tight connections.
Connect drain hose: Insert into standpipe or laundry sink; secure to avoid slipping.
Level the washer: Adjust front feet until the machine is stable and does not rock.
Plug into a grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow initial setup prompts.

Run a test cycle: Select "Clean Washer" or a quick rinse cycle to flush out any residues.
Set preferences: Use the control panel to select default settings like temperature and spin speed.
Load detergent: Fill compartments as per manufacturer instructions.
Check for leaks: Run a short cycle and inspect water connections.

CAUTION! Do not use the washer without removing transit bolts. Ensure proper leveling to prevent vibration.

Specifications

Capacity: 4.5 - 5.2 cu. ft. (varies by model).
Dimensions: Standard width 27 inches, height 39 inches, depth 30-34 inches.
Water Connections: Hot and cold water inlet hoses (3/4 inch).
Electrical: 120V AC, 60Hz, 15-amp grounded outlet.
Wash Cycles: Normal, Heavy Duty, Delicates, Quick Wash, Sanitize, etc.
Spin Speeds: Adjustable up to 1300 RPM.
Energy Rating: ENERGY STAR certified for efficiency.
Noise Level: Low vibration and sound during operation.

Controls and Settings

Access settings via the control panel. Front Panel: POWER, START/PAUSE, CYCLE SELECTION, OPTIONS.

Display: Shows cycle time, settings, and error codes.

Cycle Selection: Choose from NORMAL, HEAVY DUTY, DELICATES, QUICK WASH, BEDDING, etc. Options: Temperature (Cold, Warm, Hot), Spin Speed (Low, Medium, High, No Spin), Soil Level (Light, Normal, Heavy). Additional Features: Delay Start, Extra Rinse, Pre-Wash, Child Lock.

Connecting Utilities

Water Supply: Hot and cold hoses. Drain: Hose to standpipe or sink. Electrical: Grounded outlet.

Turn off water supply before connecting hoses.
Use only reinforced hoses; replace if worn.
Ensure drain hose is not kinked and is at proper height (minimum 39 inches from floor).
Plug into a dedicated outlet; avoid extension cords.

Tip: Check local codes for plumbing and electrical requirements.

Operating the Washer

Supports various fabric types and soil levels.

Load laundry: Open door, place clothes evenly in drum; do not overload.
Add detergent: Pour into appropriate dispenser compartment.
Select cycle: Press cycle button; adjust options as needed.
Start: Press START/PAUSE; door locks automatically.
Pause/Stop: Press START/PAUSE to pause; press and hold to cancel cycle.
Unload: Wait for door lock to release after cycle ends; remove laundry promptly.
Delay Start: Set timer to begin cycle later.
Child Lock: Enable to prevent changes during operation.

WARNING! Do not open door during spin cycle. Keep hands away from moving parts.

Special Features

Sanitize Cycle: Uses high temperature to kill bacteria. Steam Function: Optional for refresh and stain removal. Smart Diagnosis: Connects to app for troubleshooting (on select models). Energy Saver: Reduces power and water usage.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent dispenser monthly; run "Clean Washer" cycle every 30 washes.

CAUTION! Do not use abrasive cleaners; keep control panel dry. Clean lint filter regularly.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/door	Ensure plugged in; close door securely; check circuit breaker.
No water filling	Supply valves/hoses	Open water valves; check for kinks in hoses; clean inlet screens.
Excessive vibration	Leveling/load	Adjust leveling feet; redistribute load evenly; remove transit bolts.
Water not draining	Drain hose/clog	Check for kinks; clean pump filter; ensure proper drain height.
Error codes displayed	System fault	Refer to manual for code meaning; reset by unplugging for 5 minutes.

Reset: Unplug for 1 minute or press POWER for 10 seconds.

Service: 1-800-469-4668; www.kenmore.com