Kenmore Elite Washer Model 110 Manual

The Kenmore Elite Washer Model 110 is a high-efficiency top-loading washing machine featuring multiple wash cycles, adjustable water temperature and spin speed settings, a large capacity stainless steel tub, automatic detergent and fabric softener dispensers, a digital display with status indicators, and energy-saving options. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating the Washer 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel wash basket, Digital control panel, Automatic dispensers, Lid lock, Water inlet valves, Drain pump, Adjustable leveling feet.

Feature	Description
Wash Cycles	Normal, Heavy Duty, Delicates, Quick Wash, Bulky Items, Sanitize
Water Temperature	Hot, Warm, Cold, Tap Cold options
Spin Speed	High, Medium, Low, No Spin settings
Capacity	4.5 cubic feet
Control Panel	Digital display with cycle progress indicators
Automatic Dispensers	For detergent, bleach, and fabric softener
Lid Lock	Safety feature prevents opening during cycle
Delay Start	Program wash to begin later (up to 24 hours)
End of Cycle Signal	Audible alert when cycle completes
Energy Star Certified	Meets energy efficiency guidelines

Installation

Unpack and inspect contents. Place on level floor near water supply and drain.

Remove shipping materials: Take off transit bolts and packing materials.
Level the washer: Adjust front leveling feet until machine is stable.
Connect water supply: Attach hot and cold water hoses to corresponding faucets.
Connect drain hose: Secure to standpipe or laundry tub.
Plug into grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on washer; run initial test cycle.

Add detergent: Fill automatic dispenser with HE (High Efficiency) detergent.
Select test cycle: Choose "Clean Washer" or "Normal" cycle without clothes.
Run cycle: Start to flush out any residue and ensure proper operation.
Set preferences: Configure default settings like end signal volume.

CAUTION! Do not load clothes during initial test cycle. Ensure water supply valves are fully open.

Specifications

Model: Kenmore Elite 110 Series
Type: Top-Load High-Efficiency Washer
Capacity: 4.5 cu. ft.
Motor: Direct Drive
Water Connections: Hot & Cold (required)
Electrical: 120V, 60Hz, 15A dedicated circuit
Dimensions (HxWxD): 43" x 27" x 28"
Weight: 180 lbs
Warranty: 1-year full, 10-year limited on tub
Certifications: Energy Star, NSF

Controls and Settings

Access settings via control knob and button panel. Display shows cycle time, settings, and status messages.

Control Knob: Select wash cycles (Normal, Heavy, Delicates, etc.).

Buttons: TEMPERATURE (Hot/Warm/Cold/Tap Cold), SPIN SPEED (High/Med/Low/No Spin), OPTIONS (Pre-Wash, Extra Rinse, Delay Start), START/PAUSE.

Settings: Default temperature (Warm), Default spin (High), Signal volume (High/Med/Low/Off), Child lock. Special cycles: Sanitize (uses hotter water), Bulky (for bedding), Quick Wash (30 min).

Connecting Utilities

Water: Hot and cold hoses (color-coded). Drain: Hose to standpipe. Electrical: Grounded outlet.

Turn off water supply before connecting hoses.
Use only new hoses; do not reuse old ones.
Ensure drain hose is secured at proper height (minimum 39", maximum 96").
Plug into dedicated 15-amp circuit; no extension cords.

Tip: Install drip pans if washer is on second floor or above living spaces.

Operating the Washer

Supports regular and HE detergent.

Load clothes: Do not overload; leave space at top of basket.
Add supplies: Pour detergent, bleach, softener into correct dispensers.
Select cycle: Turn knob to desired wash cycle.
Adjust settings: Press TEMPERATURE, SPIN SPEED, OPTIONS as needed.
Start: Press START/PAUSE; lid will lock.
Pause: Press START/PAUSE to add forgotten items (lid unlocks after spinning stops).
Complete: Signal sounds; lid unlocks. Remove clothes promptly.

WARNING! Do not force lid open during cycle. Keep children away from operating washer.

Special Features

Delay Start: Set wash to begin later (1-24 hours). Extra Rinse: Adds rinse cycle for sensitive skin. Pre-Wash: Soaks heavily soiled items. Child Lock: Disables control panel. Clean Washer Cycle: Runs maintenance cycle monthly.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Monthly: Run "Clean Washer" cycle with washer cleaner or vinegar. Clean dispensers: Remove and rinse under water. Check drain pump filter: Clear lint/debris quarterly.

CAUTION! Do not use abrasive cleaners or solvents. Keep control panel dry.

Regulatory Information

UL Listed; complies with U.S. safety standards. Energy Star certified for efficiency. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668. Model 110 manufactured for Sears Holdings.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Ensure plugged in; close lid firmly; check circuit breaker.
No water filling	Supply valves/hoses	Open water valves; check for kinked hoses; clean inlet screens.
Water won't drain	Drain hose/clog	Check for kinks; clean drain pump filter; ensure proper drain height.
Excessive vibration	Leveling/load	Re-level washer; redistribute load; remove shipping bolts.
Error codes on display	Various faults	Consult manual code list; unplug for 5 minutes to reset.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-469-4668; www.kenmore.com