Kenmore Front Load Dryer Manual

The Kenmore Front Load Dryer is a high-efficiency electric or gas dryer designed for residential use, featuring multiple drying cycles, temperature settings, moisture sensors, wrinkle prevention options, and energy-saving modes. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Utilities 7. Operating the Dryer 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, Control Panel, Lint Filter, Exhaust Vent, Power Cord or Gas Line connection, Moisture Sensors, Reversible Door.

Feature	Description
Multiple Drying Cycles	Normal, Delicates, Heavy Duty, Quick Dry, Air Fluff
Temperature Settings	High, Medium, Low, No Heat
Moisture Sensor	Automatically stops when clothes are dry
Wrinkle Prevention Option	Tumbles clothes periodically after cycle ends
Reversible Door	Can be hinged left or right for installation flexibility
Lint Filter Indicator	Reminds user to clean lint filter
Child Lock	Prevents accidental changes to settings
Energy Saving Mode	Reduces power consumption during standby
End-of-Cycle Signal	Audible alert when drying is complete
Digital Display	Shows remaining time, cycle status, and error codes

Installation

Unpack and inspect contents. Place on level, stable surface near laundry area.

Choose location: Ensure adequate ventilation and clearance from walls.
Level the dryer: Adjust leveling feet to prevent vibration.
Connect exhaust vent: Use rigid or flexible metal ducting to vent outdoors.
Connect power: For electric models, plug into dedicated 240V outlet. For gas models, connect gas line with shut-off valve.
Test operation: Run a short cycle to verify proper installation.

WARNING! Dryer is heavy; use two people for lifting. Ensure exhaust vent is properly installed to prevent fire hazard.

First-Time Setup

Power on dryer; follow control panel prompts.

Select language: Press SETTINGS button to choose display language.
Set time: Use numeric pad to enter current time.
Configure preferences: Set default temperature, cycle, and signal volume.
Test moisture sensor: Run calibration cycle if available in settings menu.
Enable child lock: Press and hold LOCK button for 3 seconds if needed.

CAUTION! Ensure dryer is properly leveled and vented before first use.

Specifications

Type: Front Load Electric or Gas Dryer
Capacity: 7.0 cu. ft.
Power Requirements: Electric: 240V, 30A; Gas: 120V, 15A for controls
Drum Material: Stainless Steel
Control Type: Electronic with Digital Display
Cycles: 10+ including Sensor Dry, Timed Dry, and Specialty cycles
Dimensions: 27" W x 38" H x 31" D (approx.)
Weight: 150 lbs (approx.)
Vent Requirements: 4" diameter exterior vent
Energy Rating: ENERGY STAR® certified (models may vary)

Controls and Settings

Access settings via control panel buttons and dial.

Control Panel: POWER, CYCLE SELECTOR, TEMPERATURE, START/PAUSE, OPTIONS, SETTINGS.

Cycles: Normal, Heavy Duty, Delicates, Quick Dry, Air Fluff, Sanitize, Bedding, Towels. Temperature: High, Medium, Low, No Heat. Options: Wrinkle Prevention, Extended Tumble, Signal Volume, Child Lock. Settings: Language, Time, Default Cycle, Calibration.

Connecting to Utilities

Electric: 240V outlet with proper grounding. Gas: Natural gas line with shut-off valve. Vent: 4" duct to exterior.

Turn off power/gas at main before connecting.
Use proper connectors and follow local codes.
Ensure vent duct is as short and straight as possible.
Check for leaks (gas models) with soap solution.

Tip: Have installation performed by qualified technician if unsure.

Operating the Dryer

Supports various fabric types and load sizes.

Load clothes: Do not overload; leave space for tumbling.
Select cycle: Turn dial to desired cycle (e.g., Normal).
Set temperature: Press TEMP button for appropriate heat setting.
Add options: Press OPTIONS for wrinkle prevention or extended tumble.
Start: Press START/PAUSE; display shows remaining time.
Pause/Stop: Press START/PAUSE to pause; press again to stop.
Unload: Remove clothes promptly after cycle to reduce wrinkling.
Clean lint filter: Remove and clean filter after every load.

WARNING! Do not dry items contaminated with flammable substances. Clean lint filter regularly to prevent fire.

Maintenance & Cleaning

Unplug before cleaning. Clean lint filter after every load. Wipe interior and door seal monthly. Check and clean vent duct annually.

CAUTION! Do not use harsh chemicals or abrasives. Keep motor area free of lint buildup.

Safety Features

Thermal Cut-Off: Prevents overheating. Door Safety Switch: Stops drum when door is open. Child Lock: Locks control panel. Lint Filter Indicator: Alerts when filter needs cleaning.

Regulatory Information

UL Listed; complies with U.S. safety standards. For electric models, meets NEC requirements. For gas models, certified by ANSI. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer won't start	Power, door, settings	Ensure plugged in, door closed, cycle selected, and START pressed.
Clothes not drying	Lint filter, vent, heat setting	Clean lint filter; check vent for blockage; ensure proper temperature selected.
Dryer is noisy	Leveling, foreign objects	Level dryer; check drum for coins or objects; tighten loose parts.
Error code on display	Sensor, motor, or vent issue	Refer to error code chart in manual; reset by unplugging for 1 minute.
Gas odor (gas models)	Leak or ignition failure	Turn off gas immediately; ventilate area; call technician.

Reset: Unplug for 1 minute to reset electronic controls.

Service: 1-800-469-4668; www.kenmore.com