Kenmore Front Load Washer Manual

The Kenmore Front Load Washer is a high-efficiency laundry appliance designed for modern homes, featuring multiple wash cycles, temperature settings, spin speed controls, and energy-saving options. It includes a front-loading door with a large capacity drum, digital display, and various specialized programs for different fabric types. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Using Wash Cycles 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading door with glass window, Digital Control Panel, Large Capacity Drum, Detergent Dispenser, Water Inlet Valves, Drain Pump, Adjustable Leveling Feet.

Feature	Description
Digital Control Panel	Touch controls with LED display for cycle selection
Large Capacity Drum	Handles bulky loads like bedding and comforters
Detergent Dispenser	Compartments for detergent, bleach, and fabric softener
Water Inlet Valves	Connects to hot and cold water supply lines
Drain Pump	Removes water from the drum during spin cycles
Adjustable Leveling Feet	Ensures washer is stable on uneven floors
POWER	Turns washer on/off
START/PAUSE	Starts or pauses the selected cycle
CYCLE SELECTION	Chooses wash programs (Normal, Delicate, Heavy Duty, etc.)
TEMPERATURE CONTROL	Sets water temperature (Cold, Warm, Hot)

Installation

Unpack and inspect contents. Place on a level, sturdy floor near water and drain connections.

Connect water supply: Attach hot and cold hoses to corresponding inlet valves and water faucets.
Connect drain hose: Secure drain hose to standpipe or laundry sink.
Level the washer: Adjust the feet until the washer is stable and does not rock.
Plug into a grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow initial setup prompts.

Run a test cycle: Without laundry, run a quick wash to flush the system.
Set preferences: Use the control panel to set default temperature, spin speed, and other options.
Load detergent: Fill the detergent dispenser with HE (High-Efficiency) detergent.
Check for leaks: Monitor connections during the first cycle for any water leakage.

CAUTION! Use only HE detergent to prevent oversudsing. Do not overload the drum.

Specifications

Capacity: 4.5 cu. ft. (varies by model).
Dimensions: Standard front-load washer size.
Voltage: 120V AC, 60Hz.
Water Connections: Hot and cold water inlet hoses.
Drain Hose: Standard diameter for standpipe or sink.
Cycle Options: Normal, Delicate, Heavy Duty, Quick Wash, Sanitize, etc.
Spin Speeds: Adjustable up to 1400 RPM.
Energy Rating: ENERGY STAR certified for efficiency.

Controls and Settings

Access settings via the digital control panel. Front Panel: POWER, START/PAUSE, CYCLE SELECTION, TEMPERATURE, SPIN SPEED.

Display: Shows cycle time, settings, and error codes.

Cycle Selection: Choose from preset programs (Cotton, Synthetic, Wool, etc.). Temperature: Cold, Warm, Hot, or Tap Cold. Spin Speed: Adjust for delicate or heavy fabrics. Options: Extra Rinse, Pre-Wash, Delay Start, Child Lock.

Connecting Utilities

Water Supply: Hot and cold hoses. Drain: Hose to standpipe or sink. Electrical: Grounded outlet.

Turn off water supply before connecting hoses.
Ensure drain hose is secured to prevent slipping.
Plug into a dedicated outlet; avoid extension cords.

Tip: Use thread seal tape on hose connections to prevent leaks.

Using Wash Cycles

Supports various fabrics and soil levels.

Load laundry: Open door, place clothes loosely in drum.
Add detergent: Pour HE detergent into the dispenser.
Select cycle: Choose based on fabric type (e.g., Normal for cottons).
Adjust settings: Set temperature and spin speed as needed.
Start: Press START/PAUSE to begin the cycle.
Pause/Stop: Press START/PAUSE to pause; turn knob to cancel.
Unload: Wait for door lock to release after cycle ends.

WARNING! Do not open the door during spin cycle. Balance loads to prevent vibration.

Special Features

Delay Start: Set wash to begin later. Child Lock: Prevents accidental changes. Sanitize Cycle: Uses high temperature to kill germs. Quick Wash: For lightly soiled loads in less time.

Care & Cleaning

Unplug before cleaning. Wipe exterior with a damp cloth. Clean detergent dispenser monthly. Run a cleaning cycle (if available) or use washer cleaner tablets to prevent mold.

CAUTION! Do not use abrasive cleaners on the door glass or control panel.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/door	Ensure plugged in; door fully closed; press START firmly.
No water filling	Supply hoses	Check water supply is on; inspect hoses for kinks.
Excessive vibration	Unbalanced load/leveling	Redistribute laundry; adjust leveling feet.
Water not draining	Drain hose/clog	Ensure hose is not kinked; check for obstructions.
Error code displayed	Various faults	Refer to manual error code list; reset by unplugging for 5 minutes.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-469-4668; www.kenmore.com