Kenmore Front Loader Washer Manual

The Kenmore Front Loader Washer is a high-efficiency washing machine featuring multiple wash cycles, temperature settings, spin speed controls, and advanced stain removal technology. It includes a large capacity drum, energy-saving modes, child lock, delay start, and self-cleaning functions. Designed for residential use with standard 120V electrical connection and cold water inlet. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating the Washer 8. Special Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, Control Panel, Detergent Dispenser, Water Inlet Valves, Drain Pump, Door Lock, and Leveling Feet.

Feature	Description
Control Panel	Digital display with touch controls for cycle selection
Detergent Dispenser	Compartments for detergent, bleach, and fabric softener
Water Inlet Valves	Hot and cold water connections
Drain Pump	Removes water from drum after cycle
Door Lock	Safety lock during operation
Leveling Feet	Adjustable feet for stability
POWER	Turns washer on/off
START/PAUSE	Starts or pauses wash cycle
CYCLE SELECTION	Chooses wash program (Normal, Heavy, Delicate, etc.)
TEMPERATURE	Selects water temperature (Cold, Warm, Hot)

Installation

Unpack and inspect contents. Place on level floor near water and drain connections.

Remove shipping bolts: Use wrench to remove bolts from rear panel.
Connect water supply: Attach hot and cold hoses to corresponding valves.
Connect drain hose: Secure to standpipe or laundry sink.
Level the washer: Adjust feet until machine is stable and does not rock.
Plug into grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on washer; follow initial setup prompts.

Run cleaning cycle: Select Self Clean cycle to remove manufacturing residues.
Set default preferences: Use SETTINGS menu to select temperature defaults, spin speed, etc.
Test operation: Run a quick rinse cycle to ensure proper water flow and drainage.
Load detergent: Fill dispenser compartments as needed.

CAUTION! Do not operate without removing shipping bolts. Ensure water supply valves are fully open.

Specifications

Capacity: 4.5 cubic feet.
Dimensions: 27" W x 39" H x 32" D.
Voltage: 120V AC, 60Hz.
Water Connections: Hot and cold inlet hoses (3/4").
Spin Speeds: Adjustable up to 1400 RPM.
Wash Cycles: Normal, Heavy Duty, Delicates, Quick Wash, Sanitize, Self Clean.
Temperature Settings: Cold, Warm, Hot.
Energy Rating: ENERGY STAR certified.
Noise Level: Less than 60 dB during operation.

Controls and Settings

Access settings via control panel buttons and digital display.

Control Panel: POWER, CYCLE SELECTION, TEMPERATURE, SPIN SPEED, START/PAUSE, OPTIONS.

Cycle Settings: Soil Level (Light, Normal, Heavy), Rinse Options (Extra Rinse, Rinse Hold), Delay Start (1-24 hours). Special Features: Child Lock (hold LOCK button 3 seconds), Eco Mode, Pre-Wash, Stain Treat. Settings Menu: Language (ENGLISH default), Beep Volume, Default Temperature, Default Spin Speed.

Connecting Utilities

Water: Hot and cold inlet hoses. Drain: Drain hose to standpipe or sink. Electrical: Grounded 120V outlet.

Turn off water supply before connecting hoses.
Ensure drain hose is not kinked and is secured properly.
Plug into dedicated outlet; avoid extension cords.

Tip: Use thread seal tape on hose connections to prevent leaks.

Operating the Washer

Supports various fabric types and soil levels.

Load laundry: Open door, load clothes evenly, do not overload.
Add detergent: Pour into appropriate dispenser compartment.
Select cycle: Choose based on fabric type (e.g., Normal for cottons).
Adjust settings: Set temperature, spin speed, and options as needed.
Start cycle: Press START/PAUSE; door will lock automatically.
Pause/stop: Press START/PAUSE to pause; press again to resume. Hold to cancel.
Unload: Wait for door lock to release after cycle ends.

WARNING! Do not open door during spin cycle. Keep hands away from moving parts.

Special Features

Child Lock: Prevents accidental changes to settings. Delay Start: Programs wash to start later. Eco Mode: Reduces energy and water usage. Self Clean: Runs cleaning cycle to maintain drum hygiene.

Care & Maintenance

Unplug before cleaning. Wipe exterior with damp cloth; clean detergent dispenser monthly. Run Self Clean cycle every 30 washes.

CAUTION! Do not use abrasive cleaners; keep ventilation openings clear.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/door	Ensure plugged in; door fully closed; press START firmly.
No water filling	Water supply/hoses	Check water valves are open; inspect hoses for kinks.
Water not draining	Drain hose/clog	Ensure hose is not kinked; check for obstructions in pump filter.
Excessive vibration	Leveling/load	Re-level washer; redistribute load evenly.
Error codes on display	System fault	Refer to error code chart in manual; reset by unplugging for 1 minute.

Reset: Unplug for 5 minutes to reset control board.

Service: 1-800-469-4668; www.kenmore.com