Kenmore Front Loading Washing Machine Manual

The Kenmore Front Loading Washing Machine is a high-efficiency laundry appliance featuring multiple wash cycles, temperature settings, spin speed controls, and advanced features like steam cleaning, delay start, and child lock. It is designed for residential use with a large capacity drum, energy-saving modes, and quiet operation. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating Cycles 8. Special Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Front-loading drum, Control Panel, Detergent Dispenser, Water Inlet Valves, Drain Pump, Door Lock, and Leveling Feet.

Feature	Description
Control Panel	Digital display with touch controls for cycle selection
Detergent Dispenser	Compartments for detergent, bleach, and fabric softener
Water Inlet Valves	Hot and cold water connections
Drain Pump	Removes water from the drum after cycles
Door Lock	Safety lock during operation
Leveling Feet	Adjustable feet for stability
POWER	Turns washer on/off
START/PAUSE	Starts or pauses the selected cycle
CYCLE SELECTION	Chooses wash programs (Normal, Delicates, Heavy Duty, etc.)
TEMPERATURE CONTROL	Sets water temperature (Cold, Warm, Hot)

Installation

Unpack and inspect contents. Place on a level, sturdy floor near water and drain connections.

Remove shipping bolts: Use wrench to remove bolts from rear; keep for future moves.
Connect water supply: Attach hot and cold hoses to corresponding valves; ensure tight connections.
Connect drain hose: Insert into standpipe or laundry sink; secure with hook if provided.
Level the washer: Adjust front feet to prevent vibration; use a level.
Plug into grounded electrical outlet.

WARNING! Washer is heavy; use two people for lifting. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on washer; follow initial setup prompts.

Run a test cycle: Select "Clean Washer" or "Rinse" cycle without laundry to flush system.
Set preferences: Use control panel to set default temperature, spin speed, and sound options.
Load detergent: Fill dispenser compartments as needed for first wash.
Check for leaks: Monitor connections during first cycle.

CAUTION! Ensure washer is level and doors/windows are open for ventilation during first use.

Specifications

Capacity: 4.5 cu. ft. front-loading drum.
Dimensions: 27" W x 39" H x 30" D.
Voltage: 120V AC, 60Hz.
Water Connections: Hot and cold inlet hoses (3/4").
Cycle Options: Normal, Heavy Duty, Delicates, Quick Wash, Sanitize, Steam.
Spin Speeds: Adjustable up to 1400 RPM.
Energy Rating: ENERGY STAR® certified.
Noise Level: Less than 60 dB during operation.

Controls and Settings

Access settings via control panel buttons and dial. Front Panel: POWER, START/PAUSE, CYCLE SELECTION dial, TEMPERATURE, SPIN SPEED, OPTIONS.

Display: Shows cycle time, settings, and error codes.

Cycle Settings: Soil level (Light, Normal, Heavy), Rinse options (Extra Rinse), Delay Start (1-24 hours). Special Modes: Steam Clean, Allergen, Quick Wash. Preferences: Child Lock (hold buttons for 3 seconds), Sound On/Off, Default settings.

Connecting Utilities

Water: Hot and cold inlet hoses. Drain: Hose to standpipe or sink. Power: Grounded outlet.

Turn off water supply before connecting hoses.
Match hoses to correct valves (red for hot, blue for cold).
Ensure drain hose is not kinked and is secured above floor level.
Plug power cord directly into outlet; avoid extension cords.

Tip: Use thread seal tape on hose connections to prevent leaks.

Operating Cycles

Supports various fabrics and soil levels.

Load laundry: Open door, distribute clothes evenly; do not overload.
Add detergent: Pour into appropriate dispenser compartment.
Select cycle: Turn dial to desired program (e.g., Normal for cottons).
Adjust settings: Set temperature, spin speed, and options as needed.
Start: Press START/PAUSE; door locks automatically.
Pause/Stop: Press START/PAUSE to pause; door unlocks when safe.
End of cycle: Signal sounds; remove laundry promptly to prevent wrinkles.

WARNING! Do not open door during spin cycle. Keep children away from operating washer.

Special Features

Steam Clean: Reduces wrinkles and sanitizes without detergent. Delay Start: Programs wash to begin later. Child Lock: Disables controls to prevent tampering. Allergen Cycle: Uses extra rinses and higher temperature to reduce allergens.

Care & Maintenance

Unplug before cleaning. Monthly: Run "Clean Washer" cycle with affresh® tablet or vinegar. Clean detergent dispenser and door seal regularly. Check drain filter for debris every 3 months.

CAUTION! Do not use abrasive cleaners on surfaces. Keep area around washer dry.

Regulatory Information

UL Listed; complies with U.S. safety standards. Energy Guide label indicates estimated yearly energy use. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/door	Ensure plugged in; close door securely; check circuit breaker.
No water filling	Water supply/hoses	Check water valves are on; inspect hoses for kinks; clean inlet screens.
Excessive vibration	Leveling/load	Adjust leveling feet; redistribute laundry evenly.
Water not draining	Drain hose/filter	Check for clogs in hose; clean drain pump filter.
Error code displayed	System fault	Refer to manual code list; unplug for 5 minutes, then retry.

Reset: Unplug for 1 minute, then restart.

Service: 1-800-469-4668; www.kenmore.com