The Kenmore Microwave 790.80353310 is a countertop microwave oven featuring 1.1 cubic feet capacity, 1000 watts of cooking power, 10 power levels, sensor cooking technology, defrost function, child safety lock, turntable, and easy-clean interior. It operates on 120V AC, 60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.
Key components: Digital control panel, turntable, interior light, ventilation system, door latch, and child safety lock.
| Feature | Description |
|---|---|
| Cooking Power | 1000 watts with 10 adjustable power levels |
| Capacity | 1.1 cubic feet interior |
| Sensor Cooking | Automatically adjusts time and power for optimal results |
| Defrost Function | Weight-based defrosting for meat, poultry, and fish |
| Child Safety Lock | Prevents accidental operation |
| Turntable | Rotates food for even cooking (removable for cleaning) |
| Easy-Clean Interior | Non-stick coating for simple maintenance |
| Digital Display | Shows time, power level, and cooking status |
| One-Touch Buttons | Quick settings for popcorn, potatoes, beverages, etc. |
| Power Source | 120V AC, 60Hz |
Unpack and inspect contents. Place on a clean, stable, heat-resistant surface.
WARNING! Do not block ventilation openings. Ensure the microwave is not installed near a gas or electric range unless specifically designed for such use.
Plug in the microwave; the display will light up.
CAUTION! Never operate the microwave empty. Always have food or liquid inside during operation.
Control Panel: CLOCK, NUMBER PAD (0-9), POWER LEVEL, START/+30 SEC, STOP/CLEAR, SENSOR COOK, DEFROST, POPCORN, POTATO, BEVERAGE, REHEAT.
Basic Operations: Enter cooking time with number pad, select power level (default is 100%), press START. Use +30 SEC for quick heating.
Power Level: Press POWER LEVEL, then number (1=10%, 5=50%, 0=100%). Sensor Cook: Press SENSOR COOK, select food category, press START. Defrost: Press DEFROST, enter weight, press START. One-Touch Buttons: Pre-programmed settings for common foods.
Manual Cooking: Set time and power level. Sensor Cooking: Uses humidity sensor to determine cooking time.
Tip: Cover foods with a microwave-safe lid or vented plastic wrap to retain moisture and speed cooking.
For best results with sensor cooking:
| Food Category | Instructions | Notes |
|---|---|---|
| Fresh Vegetables | Place in microwave-safe dish, add 2 tbsp water | Stir after cooking |
| Frozen Vegetables | Use package directions as guide | Do not add water |
| Pasta | Use microwave pasta cooker | Follow recipe times |
| Casseroles | Cover with vented lid | Let stand 2-3 minutes after cooking |
| Reheat | Place food evenly on plate | Cover loosely |
Note: Sensor cooking works best with moist foods. Ensure door is closed tightly during operation.
Child Safety Lock: Press and hold STOP/CLEAR for 3 seconds to enable/disable. Door Safety Switch: Microwave stops immediately when door is opened. Thermal Fuse: Protects against overheating. Turntable Safety: Automatically stops if turntable is obstructed.
Unplug before cleaning. Wipe exterior with damp cloth. Clean interior with mild detergent and water. Remove turntable and wash separately. Clean door seals to ensure proper closure.
CAUTION! Do not use abrasive cleaners, steel wool, or harsh chemicals. Never pour water directly into the microwave cavity.
FCC Part 18: This device complies with Part 18 of the FCC Rules for Industrial, Scientific, and Medical Equipment. UL Listed: Meets UL 923 safety standards. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Microwave won't start | Door not closed, child lock on, no power | Close door securely, disable child lock, check outlet and power cord. |
| Uneven cooking | Turntable not rotating, food not arranged properly | Ensure turntable is properly seated, stir or rearrange food during cooking. |
| Sparking inside | Metal object, foil, or damaged interior | Remove all metal, check for damage to waveguide cover. |
| Display shows error code | Sensor error, door switch issue | Unplug for 1 minute, then retry. If persistent, contact service. |
| Turntable not turning | Obstruction, motor issue | Remove obstruction, ensure turntable ring is properly aligned. |
Reset: Unplug for 5 minutes to reset electronic controls.
Service: 1-800-469-4668; www.kenmore.com