Kenmore Model 106.51139210 Manual

The Kenmore Model 106.51139210 is a high-capacity top-load washing machine featuring multiple wash cycles, adjustable water temperature and load size settings, an automatic bleach and fabric softener dispenser, and a durable stainless steel wash basket. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Operating the Washer 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control Panel, Lid, Agitator, Wash Basket, Water Inlet Hoses, Drain Hose, Automatic Dispensers, Leveling Legs.

Feature	Description
Control Panel	Digital display with cycle selection and settings
Agitator	Dual-action for thorough cleaning
Wash Basket	Stainless steel, rust-resistant
Water Inlet Hoses	Hot and cold water connections
Drain Hose	For water discharge into standpipe or laundry tub
Automatic Dispensers	For bleach and fabric softener
Leveling Legs	Adjustable for stability
Lid Lock	Safety feature during operation
Delay Start	Program wash cycle up to 24 hours in advance
Signal	End-of-cycle alert

Installation

Unpack and inspect contents. Place on a solid, level floor.

Remove shipping materials: Take out transit bolts and packing.
Connect water supply: Attach hot and cold hoses to faucets and washer inlet valves.
Connect drain hose: Secure to standpipe or laundry tub (minimum height 39").
Level the washer: Adjust front leveling legs; use a level to check.
Plug into a grounded 120V AC outlet.

WARNING! Do not remove transit bolts before moving washer to final location. Ensure all connections are tight to prevent leaks.

First-Time Setup

Before first use, run a cleaning cycle.

Ensure washer is properly installed and level.
Turn on water supply faucets fully.
Add 1 cup of bleach to the basket (no clothes).
Select "Clean Washer" cycle (or Normal cycle with hot water).
Start the cycle to clean interior and remove any residue.

CAUTION! Do not use harsh chemicals for cleaning. Use only HE (High-Efficiency) detergent.

Specifications

Capacity: 4.5 cu. ft.
Color: White.
Control: Electronic with digital display.
Cycles: Normal, Heavy Duty, Delicates, Quick Wash, Bulky Items, Rinse & Spin.
Options: Extra Rinse, Pre-Wash, Delay Start, Signal On/Off.
Water Temperature: Hot, Warm, Cold selections.
Spin Speed: Multiple settings including High and Low.
Power Source: 120V AC, 60Hz, 15A.
Dimensions (HxWxD): 43" x 27" x 28".

Controls and Settings

Access settings via the control panel. Power Button: Turns washer on/off.

Cycle Selector Knob: Turn to choose wash cycle (Normal, Heavy, Delicates, etc.).

Settings: Temperature (Hot/Warm/Cold), Load Size (Small, Medium, Large, X-Large), Spin Speed (High, Medium, Low, No Spin), Options (Extra Rinse, Pre-Wash). Start/Pause Button: Begins selected cycle or pauses operation. Signal Button: Toggles end-of-cycle sound on/off. Delay Start: Press to set delayed start time (1-24 hrs).

Connecting Water & Drain

Water Supply: Hot and cold hoses (color-coded). Drain: Hose to standpipe or tub.

Turn off water supply before connecting hoses.
Use only new hoses; do not reuse old ones.
Connect hoses hand-tight, then tighten an additional 2/3 turn with pliers.
Ensure drain hose is secured to prevent slipping.
Check for leaks after connections are made.

Tip: Install a drip pan under the washer if placed in sensitive areas.

Operating the Washer

Follow these steps for each wash load.

Add laundry: Open lid, load clothes evenly around agitator.
Add detergent: Pour HE detergent into detergent dispenser (follow manufacturer's instructions).
Add additives: Pour bleach into bleach dispenser, fabric softener into softener dispenser.
Select cycle: Turn knob to desired cycle.
Adjust settings: Select temperature, load size, spin speed, and any options.
Start: Close lid, press Start/Pause. Lid will lock during cycle.
Completion: Washer will signal end of cycle. Unload promptly.

WARNING! Do not overload washer. Balance load to prevent excessive vibration.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Exterior: Wipe with a damp cloth; do not use abrasive cleaners.
Interior: Monthly, run "Clean Washer" cycle or use washing machine cleaner.
Dispensers: Remove and rinse under warm water monthly.
Lint filter: Clean periodically (if applicable).
Drain pump filter: Check and clean if washer does not drain (see troubleshooting).

CAUTION! Unplug washer before any maintenance. Keep area around washer clean and dry.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Ensure plugged in; outlet has power; close lid securely.
No water filling	Supply/valves	Check water supply is on; hoses not kinked; inlet screens clean.
Water leaks	Loose connections	Tighten hose connections; check for cracks in hoses.
Excessive vibration/noise	Leveling/load	Level washer; redistribute load; remove transit bolts.
Washer doesn't drain/spin	Drain hose/clog	Check drain hose for kinks; clean drain pump filter.
Detergent not dispensing	Dispenser clogged	Remove and rinse dispenser; use correct HE detergent.

Reset: Unplug for 1 minute, then plug back in.

Service: 1-800-469-4668; www.kenmore.com