Kenmore Model 106.56532400 Manual

The Kenmore Model 106.56532400 is a top-loading washing machine with a large capacity, multiple wash cycles, and energy-efficient features. It includes settings for various fabric types, water temperature controls, spin speed adjustments, and a built-in lint filter. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Stainless steel wash basket, Electronic control panel, Water inlet valves, Drain pump, Lint filter, Adjustable leveling legs.

Feature	Description
Capacity	Large capacity for family-sized loads
Wash Cycles	Multiple cycles including Normal, Heavy Duty, Delicates, Quick Wash
Water Temperature Control	Hot, Warm, Cold settings
Spin Speed Control	Adjustable spin speeds for different fabrics
Lid Lock	Safety feature prevents opening during cycle
Delay Start	Set wash cycle to begin at a later time
Soil Level	Light, Normal, Heavy settings
Electronic Controls	LED display and touchpad controls
Energy Star Certified	Energy-efficient operation
Self-Clean Cycle	Cleans the washer tub automatically

Installation

Unpack and inspect contents. Place on a level, stable floor.

Remove shipping materials: Take out all bolts and braces from the drum.
Adjust leveling legs: Use a wrench to adjust legs until the washer is level.
Connect water supply: Attach hot and cold water hoses to corresponding faucets.
Connect drain hose: Secure drain hose to standpipe or laundry sink.
Plug into grounded electrical outlet.

WARNING! Washer is heavy; use caution when moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

After installation, run a test cycle.

Power on the washer: Press the POWER button.
Select a cycle: Choose Normal cycle for initial test.
Run empty cycle: Add 1 cup of bleach to clean the tub, run a full cycle without clothes.
Set preferences: Adjust default settings like beeper volume or end-of-cycle signal if desired.

CAUTION! Do not load clothes during the initial cleaning cycle. Ensure water supply valves are fully open.

Specifications

Model Number: 106.56532400
Type: Top-Loading Agitator Washer
Capacity: 4.5 cu. ft.
Color: White
Voltage: 120V AC, 60Hz
Water Connections: Hot and Cold water inlet hoses (included)
Cycle Options: 10 wash cycles, 5 soil levels, 3 spin speeds
Dimensions (HxWxD): 43.5" x 27" x 28"
Warranty: 1-year limited parts and labor

Controls and Settings

Access settings via the electronic control panel.

Control Panel: POWER, CYCLE SELECTION, TEMPERATURE, SPIN SPEED, SOIL LEVEL, OPTIONS (Delay Start, Extra Rinse), START/PAUSE.

Cycle Selection: Normal, Heavy Duty, Delicates, Quick Wash, Bulky Items, Sanitize, Rinse & Spin, Drain & Spin. Temperature: Hot, Warm, Cold, Tap Cold. Spin Speed: High, Medium, Low, No Spin. Options: Delay Start (1-24 hours), Extra Rinse, Pre-Wash. Settings: Beep volume, Child Lock (default off).

Connecting Water Supply

Hot and cold water hoses included. Drain hose must be properly secured.

Turn off water supply at faucets before connecting hoses.
Connect hot water hose to hot water faucet (usually left side).
Connect cold water hose to cold water faucet (usually right side).
Secure drain hose to standpipe (minimum height 39 inches) or laundry sink.
Turn on water supply and check for leaks.

Tip: Use thread seal tape on hose connections to prevent leaks. Do not overtighten.

Operating the Washer

Follow these steps for normal operation.

Load clothes: Do not overload; leave space for agitation.
Add detergent: Use HE (High Efficiency) detergent only. Add to dispenser or directly to tub.
Select cycle: Choose appropriate cycle for fabric type.
Select options: Adjust temperature, spin speed, and soil level as needed.
Start cycle: Press START/PAUSE. Lid will lock during cycle.
Unload: Wait for cycle to complete and lid to unlock. Remove clothes promptly.

WARNING! Do not open lid during spin cycle. Use only HE detergent to prevent oversudsing.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

Clean lint filter: Remove and rinse monthly.
Run self-clean cycle: Monthly, using washer cleaner or bleach.
Wipe exterior: Use damp cloth with mild detergent.
Inspect hoses: Check for cracks or leaks annually; replace every 5 years.
Keep area around washer clean and dry.

CAUTION! Unplug washer before cleaning. Do not use abrasive cleaners on control panel.

Regulatory Information

UL Listed; complies with U.S. safety standards. Energy Star certified for energy efficiency. Manufactured for Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668. Serial number located on rear panel. Retain this manual for future reference.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/Lid	Ensure power cord is plugged in; close lid securely; press POWER button.
No water filling	Water supply	Check water supply valves are open; inspect hoses for kinks.
Excessive vibration	Leveling/load	Ensure washer is level; redistribute load evenly; remove shipping bolts.
Water leaks	Hose connections	Tighten hose connections; check for damaged hoses or tub seal.
Clothes still wet	Spin speed/drain	Select higher spin speed; check drain hose for clogs; ensure drain pump is functioning.
Error codes on display	Various faults	Refer to error code chart in manual; unplug washer for 5 minutes to reset.

Reset: Unplug washer for 5 minutes, then plug back in.

Service: 1-800-469-4668; www.kenmore.com