Kenmore Model 110.26132410 Manual

The Kenmore Model 110.26132410 is a top-loading washing machine with a large capacity stainless steel tub, multiple wash cycles, adjustable water temperature and level controls, and a durable agitator system. It features automatic sensing, a digital display, delay start, and energy-saving options. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating the Washer 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel wash tub, Digital control panel, Agitator, Lid lock, Water inlet valves, Drain pump, Adjustable leveling legs.

Feature	Description
Stainless steel tub	Durable, rust-resistant interior
Digital control panel	LED display with touch controls
Multiple wash cycles	Normal, Heavy Duty, Delicates, Quick Wash, etc.
Water temperature control	Hot, Warm, Cold selections
Water level control	Auto-sensing and manual settings
Delay start	Set wash cycle to begin later
Lid lock	Safety feature during operation
Energy saving mode	Reduces power consumption
End-of-cycle signal	Audible alert when wash is complete
Self-cleaning lint filter	Easy maintenance

Installation

Unpack and inspect contents. Place on level floor.

Remove shipping materials: Take off transit bolts and brackets.
Connect water supply: Attach hot and cold hoses to corresponding faucets.
Connect drain hose: Secure to standpipe or laundry sink.
Level the washer: Adjust front leveling legs to prevent vibration.
Plug into grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on washer; run initial test cycle.

Select language: Press SETTINGS button to choose display language.
Run clean cycle: Use TUB CLEAN cycle without clothes to flush system.
Set default preferences: Configure temperature, spin speed, and signal volume.
Test operation: Run a quick wash cycle to ensure proper function.

CAUTION! Do not load clothes during initial setup cycle. Keep area well-ventilated.

Specifications

Capacity: 4.5 cubic feet.
Motor: Direct drive, 1/2 HP.
Water Connections: Hot and cold faucets required.
Electrical: 120V, 60Hz, 15A dedicated circuit.
Dimensions: 27" W x 27" D x 43" H.
Weight: 150 lbs (empty).
Wash Cycles: 10+ including Heavy Duty, Delicates, Quick Wash.
Spin Speeds: Adjustable up to 800 RPM.
Warranty: 1-year limited parts and labor.

Controls and Settings

Access settings via digital control panel. Power Button: Turns washer on/off.

Cycle Selector: Turn knob to choose wash cycle. Temperature: Select HOT, WARM, COLD. Spin Speed: Choose speed for different fabrics. Options: Delay Start, Extra Rinse, Pre-Soak, Energy Saver.

Display: Shows cycle time, settings, and error codes. Settings Menu: Language, signal volume, default temperature, child lock.

Connecting Utilities

Water Supply: Hot and cold hoses. Drain: Hose to standpipe. Electrical: Grounded outlet.

Turn off water supply before connecting hoses.
Use only reinforced washing machine hoses.
Ensure drain hose is secured to prevent slipping.
Plug into dedicated 15A circuit; avoid extension cords.

Tip: Check for leaks after initial connections by running a short cycle.

Operating the Washer

Supports various fabric types and soil levels.

Load clothes: Do not overload; leave space for agitation.
Add detergent: Use HE detergent; follow manufacturer instructions.
Select cycle: Choose based on fabric type (e.g., Normal for cottons).
Set options: Adjust temperature, spin speed, and extra rinses as needed.
Start cycle: Press START/PAUSE; lid will lock during operation.
Pause/stop: Press START/PAUSE to pause; turn knob to OFF to cancel.
Unload: Wait for lid to unlock; remove clothes promptly.

WARNING! Do not open lid during spin cycle. Keep children away from operating washer.

Maintenance Features

Self-Cleaning Lint Filter: Automatically cleans during drain cycle. TUB CLEAN Cycle: Run monthly to prevent odors. Child Lock: Prevents accidental changes to settings.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean interior with TUB CLEAN cycle.

CAUTION! Do not use abrasive cleaners or bleach on control panel. Keep ventilation openings clear.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Ensure plugged in; close lid securely; check circuit breaker.
No water filling	Supply hoses/valves	Check water supply is on; inspect hoses for kinks; clean inlet screens.
Excessive vibration	Leveling/load	Level washer; redistribute load; remove shipping materials.
Water not draining	Drain hose/clog	Check hose for kinks; clean pump filter; ensure proper drain height.
Error codes displayed	Sensor issues	Refer to error code chart in manual; reset by unplugging for 5 minutes.

Reset: Unplug for 5 minutes to reset control board.

Service: 1-800-469-4668; www.kenmore.com