Kenmore Model 110.66002010 Manual

The Kenmore Model 110.66002010 is a top-loading washing machine with a 4.0 cubic foot capacity, featuring multiple wash cycles, water temperature selections, and load size adjustments. It includes an automatic bleach and fabric softener dispenser, a heavy-duty stainless steel wash basket, and a powerful motor for effective cleaning. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, Stainless steel wash basket, Automatic dispensers, Water inlet hoses, Power cord, Leveling legs.

FeatureDescription
Capacity4.0 cubic feet for large loads
Wash CyclesNormal, Heavy Duty, Delicates, Quick Wash, and more
Water TemperatureHot, Warm, Cold selections
Load SizeSmall, Medium, Large, Extra Large settings
Automatic DispensersFor bleach and fabric softener
Stainless Steel BasketDurable and rust-resistant
Digital DisplayShows cycle time and settings
Delay StartSet wash cycle to begin later
Child LockPrevents accidental changes during operation
End of Cycle SignalAudible alert when cycle completes

Installation

Unpack and inspect contents. Place on a level, stable floor.

  1. Remove shipping materials: Take off transit bolts and packaging.
  2. Connect water supply: Attach hot and cold water hoses to faucets and washer inlet.
  3. Connect drain hose: Place hose into standpipe or laundry sink.
  4. Level the washer: Adjust leveling legs to prevent vibration.
  5. Plug into grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on washer; follow initial setup steps.

  1. Run a test cycle: Select Normal cycle with hot water to clean interior.
  2. Set preferences: Use control panel to set default water temperature, spin speed.
  3. Calibrate: Allow washer to auto-calibrate for load sensing.
  4. Read manual: Familiarize yourself with all cycles and features.

CAUTION! Ensure washer is level and not resting on power cord or hoses.

Specifications

Controls and Settings

Access settings via control panel knobs and buttons.

Control Panel: POWER, CYCLE SELECTOR KNOB, TEMPERATURE, OPTIONS (Delay Start, Extra Rinse, etc.), START/PAUSE.

Cycle Selection: Turn knob to desired cycle (Normal, Heavy Duty, Delicates, etc.). Temperature: Select Hot, Warm, Cold for wash and rinse. Options: Extra Rinse, Pre-Soak, Delay Start (1-24 hours). Settings: Child Lock (hold 3 seconds), Signal volume, Default settings.

Connecting Water Supply

Hot and Cold water inlets; Drain hose.

  1. Turn off water faucets before connecting hoses.
  2. Connect hoses: Hand-tighten; avoid cross-threading.
  3. Check for leaks: Turn on water slowly; inspect connections.
  4. Place drain hose: Secure in standpipe (minimum height 39").

Tip: Use only new hoses; replace every 5 years to prevent failure.

Operating the Washer

Supports various fabrics and soil levels.

  1. Load laundry: Do not overload; mix large and small items.
  2. Add detergent: Use HE detergent; pour into dispenser or basket.
  3. Add bleach/softener: Use automatic dispensers if available.
  4. Select cycle: Turn knob to desired cycle.
  5. Select options: Temperature, spin speed, extra rinse, etc.
  6. Start: Press START/PAUSE; display shows time remaining.
  7. Pause/Stop: Press START/PAUSE to pause; turn knob to cancel.
  8. Unload: Remove promptly after cycle to prevent wrinkles.

WARNING! Do not wash items soaked in solvents; avoid washing rugs with foam backing.

Maintenance & Cleaning

Monthly cleaning prevents odors and maintains performance.

  1. Clean basket: Run hot water cycle with washer cleaner or vinegar.
  2. Clean dispensers: Remove and rinse under warm water.
  3. Wipe exterior: Use damp cloth; avoid abrasive cleaners.
  4. Inspect hoses: Check for cracks, bulges; replace if damaged.
  5. Clean lint filter: If equipped, remove and clean monthly.

CAUTION! Unplug before cleaning. Do not use harsh chemicals on control panel.

Regulatory Information

UL Listed; complies with U.S. safety standards. Energy Star certified. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

SymptomPossible CauseCorrective Action
Washer won't startPower/child lockEnsure plugged in; outlet has power; disable child lock.
No water fillingWater supply/hosesCheck water faucets are on; inspect hoses for kinks.
Excessive vibrationLeveling/loadEnsure washer is level; redistribute load evenly.
Water leaksLoose connectionsTighten hose connections; check drain hose placement.
Poor cleaningDetergent/loadingUse correct HE detergent amount; avoid overloading.
Error codes displayedVarious faultsRefer to manual error code chart; reset by unplugging for 5 minutes.

Reset: Unplug for 5 minutes to reset control board.

Service: 1-800-469-4668; www.kenmore.com

Kenmore Model 110.66002010 Manual © - All Rights Reserved 2025