Kenmore Model 116 Manual

The Kenmore Model 116 is a versatile household appliance designed for efficient operation with user-friendly features. This manual provides comprehensive instructions for safety, installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your appliance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Utilities 7. Operating Procedures 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main control panel, power unit, operational chamber, adjustable settings, safety lock, and indicator lights.

Feature	Description
Power Switch	Main on/off control for the appliance
Mode Selector	Selects between different operational modes
Temperature Control	Adjusts operating temperature
Timer	Sets automatic shut-off duration
Safety Lock	Prevents accidental operation
Indicator Lights	Shows power status and active mode
Ventilation Port	Allows heat dissipation
Access Door	Provides access to internal chamber
Leveling Feet	Adjustable for stable placement
Cord Storage	Compartment for power cord

Installation

Unpack and inspect all components. Place on level, stable surface with adequate clearance.

Remove all packaging materials and protective films.
Position appliance on flat, stable surface away from heat sources and water.
Adjust leveling feet to ensure appliance is stable and doesn't rock.
Ensure proper ventilation space (minimum 4 inches) on all sides.
Connect to appropriate power source (see specifications).

WARNING! Appliance is heavy; use proper lifting technique or assistance. Ensure installation area is dry and well-ventilated.

First-Time Setup

Before first use, complete initial setup and cleaning procedure.

Wipe interior and exterior with damp cloth and mild detergent, then dry thoroughly.
Plug into dedicated electrical outlet matching voltage requirements.
Turn power switch to ON position; indicator light should illuminate.
Run empty cycle for 30 minutes to remove any manufacturing residues.
Set preferred language and units in settings menu if applicable.

CAUTION! Do not operate with empty chamber unless specified. Allow appliance to cool completely before handling.

Specifications

Model: 116
Power Requirements: 120V AC, 60Hz, 15A
Dimensions: 24" W × 18" D × 36" H
Weight: 85 lbs
Capacity: Standard load capacity as specified
Temperature Range: 100°F to 500°F adjustable
Timer Range: 1 minute to 12 hours
Operational Modes: Standard, Eco, Intensive, Quick
Safety Certifications: UL Listed, CSA Certified
Warranty: 1-year limited warranty

Controls and Settings

Control panel located on front of appliance. Main controls: Power, Mode Selector, Temperature, Timer.

Control Panel: POWER button, MODE selector knob, TEMPERATURE dial, TIMER dial, START/PAUSE button, LOCK button.

Settings: Temperature control (100-500°F), Timer (1 min-12 hrs), Mode selection (STANDARD, ECO, INTENSIVE, QUICK), Safety lock (prevents accidental activation), Indicator lights (POWER, HEATING, COMPLETE).

Connecting to Utilities

Connect only to properly grounded electrical outlet matching specifications.

Ensure appliance is turned OFF and unplugged before any connections.
Plug power cord into dedicated 120V, 15A grounded outlet.
Do not use extension cords or power strips.
Ensure outlet is easily accessible for emergency disconnection.
Verify proper grounding before operation.

Tip: Have qualified electrician verify electrical supply if unsure about compatibility.

Operating Procedures

Follow these steps for normal operation.

Ensure safety lock is disengaged and access door is properly closed.
Select desired mode using MODE selector knob.
Set temperature using TEMPERATURE dial.
Set timer for desired duration.
Press START button to begin operation.
Monitor indicator lights: HEATING light during operation, COMPLETE light when finished.
When complete, allow appliance to cool before opening access door.
Turn POWER switch to OFF position after use.

WARNING! Never force open access door during operation. Allow complete cooling cycle before opening.

Safety Features

Automatic shut-off: Activates when timer completes or if overheating detected. Safety lock: Prevents door opening during operation. Thermal cutoff: Disables heating element if temperature exceeds safe limits. Ground fault protection: Built-in GFCI for electrical safety.

Care & Cleaning

Unplug and cool completely before cleaning. Clean exterior with damp cloth and mild detergent. Clean interior according to manufacturer instructions. Empty and clean collection areas regularly.

CAUTION! Never immerse appliance in water or use abrasive cleaners. Do not use steam cleaners.

Regulatory Information

FCC Part 15: Class B digital device compliant. UL Standard 60335-1 certified. CSA C22.2 No. 60335-1 compliant. Manufactured to meet applicable safety standards. Copyright © Kenmore; all rights reserved. For support, visit www.kenmore.com or contact 1-800-536-6247.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Appliance won't turn on	Power source/switch	Check power cord connection; verify outlet function; ensure power switch is ON.
No heating	Settings/thermal cutoff	Verify temperature setting; check if thermal cutoff needs reset; allow cool-down period.
Door won't open	Safety lock/temperature	Ensure safety lock is disengaged; wait for complete cooling; check for obstructions.
Unusual noises	Leveling/obstructions	Check leveling feet; remove any foreign objects; ensure stable surface.
Error lights flashing	Various faults	Consult error code chart in manual; unplug for 5 minutes then retry; contact service if persistent.

Reset: Unplug for 5 minutes to reset electronic controls.

Service: 1-800-536-6247; www.kenmore.com