Kenmore Model 253.28432809 Manual

The Kenmore Model 253.28432809 is a high-capacity, energy-efficient top-load washing machine featuring multiple wash cycles, adjustable water temperature and spin speed settings, a durable stainless steel wash basket, automatic load sensing, and a powerful cleaning system. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control Panel, Agitator, Stainless Steel Wash Basket, Lid, Water Inlet Hoses, Drain Hose, and Leveling Legs.

Installation

Unpack and inspect contents. Place on a level, solid floor near water supply and drain.

1. Remove shipping materials: Take off transit bolts and packing.
2. Connect water supply: Attach hot and cold hoses to faucets and washer inlet valves.
3. Position drain hose: Place into standpipe or laundry tub.
4. Level the washer: Adjust front legs to prevent vibration.
5. Plug into grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

Before first use, run a cleaning cycle.

1. Power on washer: Plug in and ensure power is available.
2. Select cleaning cycle: Choose "Clean Washer" or run a hot water cycle with bleach (if recommended).
3. Set preferences: Adjust default settings like spin speed and temperature if desired.
4. Test operation: Run a small load to ensure proper functioning.

CAUTION! Do not use washer without removing shipping bolts. Ensure unit is level to avoid excessive noise.

Specifications

• Capacity: 4.5 cu. ft.
• Color: White.
• Control Type: Electronic with LED display.
• Water Connections: Hot & Cold.
• Voltage: 120V AC, 60Hz.
• Motor: Direct Drive.
• Cycle Options: Normal, Heavy Duty, Delicates, Quick Wash, Bulky Items, Rinse & Spin.
• Temperature Settings: Hot, Warm, Cold.
• Spin Speed Settings: High, Medium, Low, No Spin.
• Dimensions (HxWxD): 43" x 27" x 28".

Controls and Settings

Access settings via the control panel. Power Button: Turns washer on/off.

Cycle Selector Knob: Choose wash cycle (Normal, Heavy Duty, Delicates, etc.).

Options: Temperature (Hot/Warm/Cold), Spin Speed (High/Medium/Low), Soil Level (Heavy/Normal/Light), Extra Rinse, Delay Start. Display: Shows cycle time, settings, and error codes. Lid Lock: Engages when cycle starts for safety.

Connecting Water Supply

Hot and Cold: Connect labeled hoses to corresponding faucets and washer valves.

1. Turn off water supply at faucets.
2. Connect hoses: Hand-tighten, then use pliers for an additional quarter turn.
3. Check for leaks: Turn on water and inspect connections.
4. Drain hose: Ensure it is secured in a standpipe or laundry tub.

Tip: Use only new hoses; inspect regularly for wear.

Operating the Washer

Supports various fabric types and soil levels.

1. Load laundry: Do not overload; distribute evenly.
2. Add detergent: Use HE detergent; follow manufacturer's instructions.
3. Select cycle: Turn knob to desired cycle.
4. Adjust settings: Set temperature, spin speed, and options.
5. Start cycle: Close lid and press Start/Pause.
6. Pause/Stop: Press Start/Pause to interrupt; press again to resume.
7. End of cycle: Signal sounds; remove laundry promptly.

WARNING! Do not open lid during spin cycle. Keep children away from operating washer.

Care & Maintenance

Unplug before cleaning. Wipe exterior with damp cloth; clean interior with recommended cleaner monthly.

Regular Tasks: Clean lint filter, inspect hoses, run cleaning cycle, leave lid open after use to dry.

CAUTION! Do not use abrasive cleaners. Replace hoses every 5 years.

Regulatory Information

UL Listed; complies with U.S. safety standards. Energy Star certified for efficiency. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Reset: Unplug for 1 minute, then plug back in.

Service: 1-800-469-4668; www.kenmore.com