Kenmore Model 41162 Washer Manual

The Kenmore Model 41162 is a top-loading washing machine with multiple wash cycles, load size options, and water temperature controls. It features a durable stainless steel tub, automatic detergent and fabric softener dispensers, a delay start function, and a child safety lock. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Control Panel, Stainless Steel Tub, Detergent Dispenser, Fabric Softener Dispenser, Water Inlet Hoses, Drain Hose, Leveling Legs.

Installation

Unpack and inspect contents. Place on a level, stable floor near water and drain connections.

1. Remove shipping materials: Take out transit bolts and packing materials.
2. Connect water supply: Attach hot and cold water hoses to corresponding faucets.
3. Connect drain hose: Place drain hose into a standpipe or laundry sink.
4. Level the washer: Adjust the leveling legs to ensure the washer is stable.
5. Plug into a grounded electrical outlet.

WARNING! Washer is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on the washer; follow initial setup prompts.

1. Run a test cycle: Select the "Clean Washer" cycle to remove any residues.
2. Set preferences: Use the control panel to set default water temperature and spin speed.
3. Load laundry: Place clothes evenly in the tub, not exceeding the maximum load capacity.
4. Add detergent: Pour detergent into the dispenser; add fabric softener if needed.
5. Select cycle: Choose the appropriate wash cycle for your laundry.

CAUTION! Do not overload the washer. Ensure the washer is level to prevent vibration.

Specifications

• Capacity: 4.5 cubic feet.
• Dimensions: 27 inches wide, 42 inches high, 28 inches deep.
• Weight: 150 lbs.
• Water Connections: Hot and cold water inlet hoses.
• Electrical: 120V AC, 60Hz, 15A.
• Wash Cycles: Normal, Heavy Duty, Delicates, Quick Wash, Bulky Items.
• Options: Delay Start, Extra Rinse, Pre-Soak, Child Lock.
• Control: Electronic with digital display.
• Warranty: 1-year limited warranty.

Controls and Settings

Access settings via the control panel. Front Panel: POWER, START/PAUSE, CYCLE SELECTION, OPTIONS.

Control Panel: POWER, Cycle buttons (NORMAL, HEAVY DUTY, DELICATES, etc.), TEMPERATURE, SPIN SPEED, OPTIONS (Delay Start, Extra Rinse), CHILD LOCK, START/PAUSE.

Cycle Settings: Water temperature (Hot, Warm, Cold), Spin speed (High, Medium, Low, No Spin). Options: Delay Start (1-24 hours), Extra Rinse, Pre-Soak. Install: Language (ENGLISH default), default settings. Safety: Child Lock to prevent changes during operation.

Connecting Utilities

Water Supply: Hot and cold water hoses. Drain: Drain hose to standpipe or sink.

1. Turn off water supply before connecting hoses.
2. Attach hoses to corresponding hot and cold water faucets.
3. Secure drain hose to prevent slipping during drain cycles.
4. Plug the washer into a dedicated grounded outlet.

Tip: Use thread seal tape on hose connections to prevent leaks.

Operating the Washer

Supports various fabric types and soil levels.

1. Load laundry: Open lid, place clothes evenly in tub.
2. Add supplies: Pour detergent into dispenser; add fabric softener if desired.
3. Select cycle: Press cycle button (e.g., NORMAL, HEAVY DUTY).
4. Set options: Adjust temperature, spin speed, and options like Extra Rinse.
5. Start: Press START/PAUSE to begin wash cycle.
6. Pause/Stop: Press START/PAUSE to pause; press again to resume. To stop, hold for 3 seconds.
7. Delay Start: Press DELAY START to set a later start time (1-24 hours).
8. Child Lock: Press and hold CHILD LOCK for 3 seconds to enable/disable.

WARNING! Do not open lid during spin cycle. Keep fingers away from moving parts.

Maintenance & Cleaning

Unplug before cleaning. Wipe exterior with a damp cloth; clean interior with "Clean Washer" cycle monthly.

1. Clean detergent dispenser: Remove and rinse under warm water.
2. Clean lint filter: Remove and clean lint filter regularly.
3. Inspect hoses: Check for cracks or leaks; replace every 5 years.
4. Run clean cycle: Use "Clean Washer" cycle with washer cleaner or vinegar.

CAUTION! Do not use abrasive cleaners. Keep the washer dry when not in use.

Safety Features

Child Lock: Prevents changes to settings during operation. Lid Lock: Automatically locks during spin cycle. Overflow Protection: Prevents overfilling. For safety, always unplug before maintenance.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 Kenmore; trademarks of Sears Brands, LLC. Energy Star certified for energy efficiency. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Reset: Unplug for 1 minute, then plug back in to reset control panel.

Service: 1-800-469-4668; www.kenmore.com