Kenmore Model 596.72383411 Manual

The Kenmore Model 596.72383411 is a high-capacity, energy-efficient washing machine featuring multiple wash cycles, temperature settings, and advanced fabric care options. It includes a stainless steel drum, digital controls, delay start, child lock, and self-cleaning functions. Designed for residential use with 120V AC power. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water & Drain 7. Using Wash Cycles 8. Maintenance Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital Control Panel, Stainless Steel Drum, Water Inlet Valves, Drain Pump, Detergent Dispenser, and Child Safety Lock.

Feature	Description
Digital Control Panel	Touch controls with LED display for cycle selection
Stainless Steel Drum	Durable, rust-resistant interior for fabric care
Water Inlet Valves	For hot and cold water connections
Drain Pump	Efficient water removal system
Detergent Dispenser	Compartments for detergent, bleach, and fabric softener
Child Safety Lock	Locks control panel during operation
Delay Start	Program wash cycle to begin later
Self-Cleaning Cycle	Cleans drum to prevent odor and residue
Multiple Wash Cycles	Normal, Heavy Duty, Delicates, Quick Wash, etc.
Temperature Settings	Hot, Warm, Cold water options

Installation

Unpack and inspect contents. Place on level floor.

Connect water supply: Attach hot and cold hoses to corresponding valves.
Connect drain hose: Secure to standpipe or laundry sink.
Level the machine: Adjust leveling feet to prevent vibration.
Plug into grounded electrical outlet.

WARNING! Machine is heavy; use two people for moving. Ensure all connections are secure to prevent leaks.

First-Time Setup

Power on washer; run initial setup.

Remove shipping materials: Take out transit bolts and packing.
Run test cycle: Select Quick Wash without laundry to flush system.
Set preferences: Adjust default settings like spin speed and temperature.
Activate child lock: Press and hold Child Lock button for 3 seconds if needed.

CAUTION! Ensure machine is level and water connections are tight before first use.

Specifications

Capacity: 4.5 cu. ft.
Power Source: 120V AC, 60Hz.
Water Connections: Hot and Cold inlet hoses.
Control: Digital with LED display.
Wash Cycles: Normal, Heavy Duty, Delicates, Quick Wash, Bulky Items, Self Clean.
Spin Speeds: Adjustable (High, Medium, Low, No Spin).
Temperature Settings: Hot, Warm, Cold, Tap Cold.
Dimensions: Standard front-load washer size.
Weight: Approximately 200 lbs.

Controls and Settings

Access settings via Control Panel. Power Button: Turns washer on/off.

Cycle Selector: Turn knob to choose wash cycle. Options: START/PAUSE, DELAY START, CHILD LOCK, OPTIONS (spin speed, temperature, soil level).

Display: Shows cycle time, settings, and status messages. Detergent Dispenser: Main wash, pre-wash, fabric softener compartments. Settings: Default temperature (Warm), spin speed (High), soil level (Normal).

Connecting Water & Drain

Water Inlet: Hot and cold connections. Drain: Hose to standpipe or sink.

Turn off water supply before connecting hoses.
Connect hoses to corresponding valves (red for hot, blue for cold).
Secure drain hose to prevent slipping or kinking.
Check for leaks after connections are made.

Tip: Use thread seal tape on hose connections for better seal.

Using Wash Cycles

Supports various fabrics and soil levels.

Load laundry: Open door, place clothes evenly in drum.
Add detergent: Pour into appropriate dispenser compartment.
Select cycle: Turn knob to desired wash cycle.
Adjust settings: Press OPTIONS for temperature, spin speed, soil level.
Start: Press START/PAUSE to begin cycle.
Pause/Stop: Press START/PAUSE to pause; turn knob to cancel.
Delay Start: Press DELAY START to set later start time (1-24 hours).
End of cycle: Signal sounds; remove laundry promptly.

WARNING! Do not overload drum. Balance load to prevent vibration.

Maintenance Features

Self-Cleaning Cycle: Run monthly to clean drum and prevent odors. Child Lock: Locks control panel during operation. Error Codes: Display shows codes for issues (e.g., E1 for water supply).

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth. Clean detergent dispenser monthly. Run Self-Cleaning cycle regularly.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

UL Listed; complies with U.S. safety standards. Energy Star certified for energy efficiency. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/child lock	Ensure plugged in; check circuit breaker; disable child lock.
No water filling	Water supply/hoses	Check water valves are on; inspect hoses for kinks.
Excessive vibration	Leveling/load	Adjust leveling feet; redistribute laundry evenly.
Water not draining	Drain hose/clog	Check hose for kinks; clean pump filter.
Error code displayed	System fault	Refer to manual error code list; reset by unplugging for 1 minute.

Reset: Unplug for 1 minute to reset control system.

Service: 1-800-469-4668; www.kenmore.com