Kenmore Pro Refrigerator Manual

The Kenmore Pro Refrigerator is a premium, high-capacity refrigerator designed for home use, featuring advanced temperature control, energy-efficient operation, ice and water dispensers, adjustable shelving, humidity-controlled crispers, and smart connectivity options. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: French doors, bottom freezer drawer, external ice and water dispenser, digital temperature controls, adjustable gallon door bins, spill-proof glass shelves, and humidity-controlled crispers.

Installation

Unpack and inspect contents. Ensure proper location with adequate clearance.

1. Remove all packaging materials and tape.
2. Position refrigerator: Allow at least 2 inches clearance on sides and top, 4 inches at back for ventilation.
3. Level the refrigerator: Adjust front leveling legs to ensure doors close properly.
4. Connect water line (for ice/water dispenser models): Use approved water supply kit.
5. Plug into dedicated 120V AC outlet.

WARNING! Refrigerator is heavy; use two people for moving. Ensure floor can support full weight.

First-Time Setup

After installation, allow refrigerator to stabilize before loading food.

1. Initial cooling: Turn on power, set refrigerator to 37°F (3°C) and freezer to 0°F (-18°C).
2. Allow 24 hours for temperature stabilization before adding food.
3. Install water filter: Follow instructions for priming and installation.
4. Test ice maker: Discard first batch of ice (approximately 24 cubes).
5. Configure settings: Set door alarm, energy saver mode, and other preferences.

CAUTION! Do not overload shelves. Distribute weight evenly.

Specifications

• Capacity: 25 cu. ft. total (18 cu. ft. refrigerator, 7 cu. ft. freezer).
• Dimensions: 70" H × 36" W × 34" D.
• Doors: French doors with bottom freezer drawer.
• Temperature Control: Digital display with separate refrigerator/freezer settings.
• Water Filter: EveryDrop® Ice & Water Filter EDR3RXD1 (replaces every 6 months).
• Ice Production: Up to 4.5 lbs per day.
• Shelving: 4 adjustable glass shelves, 5 door bins.
• Power Source: 120V AC, 60Hz, 6.5 Amps.
• Energy Star: Certified for energy efficiency.
• Warranty: 1-year full warranty, 5-year sealed system warranty.

Controls and Settings

Access controls via digital display panel on refrigerator door.

Control Panel: POWER, TEMPERATURE SETTINGS (Refrigerator/Freezer), ICE MAKER ON/OFF, WATER FILTER RESET, DOOR ALARM, ENERGY SAVER, LOCK CONTROLS.

Temperature Settings: Refrigerator (34°F to 46°F), Freezer (-5°F to 5°F). Ice Maker: ON/OFF control. Filter Reset: Press and hold for 3 seconds after filter replacement. Door Alarm: Enable/disable audible alert. Energy Saver: Reduces condensation in humid environments. Control Lock: Prevents accidental setting changes.

Using the Refrigerator

Optimal organization improves cooling efficiency and food preservation.

1. Shelves: Adjust height to accommodate different food items.
2. Crispers: Use humidity controls for vegetables (high humidity) and fruits (low humidity).
3. Door Bins: Store condiments, beverages, and other frequently used items.
4. Meat Drawer (if equipped): Maintains lower temperature for meat storage.
5. Temperature Monitoring: Use refrigerator thermometer to verify settings.

Tip: Allow hot foods to cool before placing in refrigerator to maintain efficiency.

Using the Freezer

Bottom freezer drawer with adjustable organization options.

1. Freezer Baskets: Two adjustable baskets for organized storage.
2. Ice Storage Bin: Holds up to 4.5 lbs of ice.
3. Quick Freeze Zone: Designated area for rapid freezing of new items.
4. Temperature Setting: Maintain 0°F (-18°C) for optimal food preservation.
5. Defrosting: Automatic defrost system; no manual defrosting required.

WARNING! Do not store glass containers in freezer. Leave space between items for air circulation.

Ice & Water Dispenser

External dispenser provides cubed ice, crushed ice, and filtered water.

1. Select Ice Type: Press CUBED or CRUSHED button.
2. Water Dispensing: Press and hold WATER button.
3. Child Lock: Press and hold LOCK button for 3 seconds to disable dispenser.
4. Filter Replacement: When indicator light turns red, replace filter (every 6 months).
5. Cleaning Dispenser: Wipe with damp cloth; never use abrasive cleaners.

CAUTION! First ice batch may be discolored; discard. Do not use with non-potable water.

Care & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Unplug before cleaning interior components.
2. Interior: Clean with solution of baking soda and warm water (2 tbsp per quart).
3. Exterior: Wipe with mild detergent and soft cloth; avoid abrasive cleaners.
4. Shelves and Bins: Remove and wash with warm, soapy water.
5. Condenser Coils: Vacuum every 6 months to maintain efficiency.
6. Door Seals: Wipe clean to ensure proper seal.

CAUTION! Do not use harsh chemicals, ammonia, or chlorine bleach. Never steam clean.

Energy Saving Tips

Maximize efficiency and reduce energy consumption.

• Maintain proper temperature settings (37°F refrigerator, 0°F freezer).
• Ensure door seals are clean and tight.
• Allow hot foods to cool before refrigerating.
• Keep condenser coils clean.
• Use Energy Saver mode in low-humidity environments.
• Minimize door openings and ensure doors close completely.
• Do not block air vents inside refrigerator.
• Position away from heat sources (oven, dishwasher, direct sunlight).

Troubleshooting

Reset: Unplug for 5 minutes, then reconnect to reset electronic controls.

Service: 1-800-536-6673; www.kenmore.com