Kenmore Refrigerator Elite Manual

The Kenmore Refrigerator Elite is a premium refrigerator model featuring advanced cooling technology, adjustable shelving, humidity-controlled crispers, ice and water dispenser, energy-efficient operation, digital temperature controls, door alarms, and various storage configurations. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using the Ice & Water Dispenser 7. Storage and Organization 8. Energy Saving Tips 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital temperature display, adjustable glass shelves, humidity-controlled crispers, ice maker, water filter, door bins, freezer drawer, and energy-saving mode.

Feature	Description
Digital Temperature Control	Precise adjustment for fridge and freezer compartments
Adjustable Glass Shelves	Customizable storage space
Humidity-Controlled Crispers	Preserves freshness of fruits and vegetables
Ice & Water Dispenser	Provides filtered ice and water through the door
Door Alarm	Alerts if door is left open
Energy Saver Mode	Reduces power consumption
Freezer Drawer	Slide-out basket for organized frozen storage
Water Filter Indicator	Light alerts when filter needs replacement
Interior LED Lighting	Bright, efficient illumination
Power Cord	Standard 120V AC connection

Installation

Unpack and inspect contents. Ensure proper location with adequate ventilation.

Position the refrigerator: Allow at least 2 inches of clearance on all sides for airflow.
Level the unit: Adjust front leveling legs to ensure doors close properly.
Connect water line (for dispenser): Attach to cold water supply using included kit.
Plug into dedicated 120V AC outlet.
Allow 24 hours for cooling system to stabilize before adding food.

WARNING! Refrigerator is heavy; use two people for movement. Ensure floor can support weight.

First-Time Setup

Plug in refrigerator; follow initial setup steps.

Set temperatures: Use digital controls to set fridge (recommended 37°F) and freezer (0°F).
Install water filter: Remove cap, insert filter, turn clockwise until it stops.
Flush water system: Dispense and discard first 2 gallons of water.
Enable ice maker: Lift arm to ON position.
Organize shelves: Adjust heights according to your storage needs.

CAUTION! Do not overload shelves. Ensure door seals are clean and tight.

Specifications

Capacity: 25 cubic feet total (16 cu ft refrigerator, 9 cu ft freezer).
Dimensions: 36" W x 70" H x 34" D.
Door Swing: Reversible doors (left or right opening).
Water Filter: EveryDrop® Filter EDR3RXD1 (replacement every 6 months).
Ice Production: Up to 4 lbs per day.
Energy Rating: ENERGY STAR® certified.
Power Source: 120V AC, 60Hz, 6.5 Amps.
Operating Temp Range: 55°F to 110°F ambient.

Controls and Settings

Access controls via digital panel on front exterior or inside compartments.

Control Panel: TEMPERATURE SET (Fridge/Freezer), ICE MAKER ON/OFF, WATER FILTER RESET, DOOR ALARM, ENERGY SAVER, LOCK CONTROLS.

Temperature: Adjust in 1-degree increments from 34°F to 46°F (fridge) and -5°F to 5°F (freezer). Ice Maker: Switch ON/OFF via control or by lifting/lowering arm. Filter Reset: Press and hold for 3 seconds after filter replacement. Door Alarm: Sounds after 3 minutes if door ajar. Energy Saver: Reduces condensation in humid environments. Control Lock: Prevents accidental setting changes.

Using the Ice & Water Dispenser

Dispenser provides cubed ice, crushed ice, and filtered water.

Select type: Press CUBE or CRUSH button for ice; press WATER for filtered water.
Dispense: Press glass against paddle or hold button.
Replace filter: When indicator light turns red, twist old filter out, insert new.
Clean dispenser area: Wipe with damp cloth; never use abrasive cleaners.

Tip: First ice production may take 24 hours. Discard first batch.

Storage and Organization

Optimize storage for efficiency and food preservation.

Adjust shelves: Lift and reposition glass shelves on support rails.
Crispers: Set humidity slider to HIGH for vegetables, LOW for fruits.
Door bins: Store condiments, drinks; weight limit 25 lbs per bin.
Freezer drawer: Use baskets for small items; store meats on bottom.
Air circulation: Do not block vents with food items.

WARNING! Do not place hot food directly in refrigerator. Allow to cool first.

Energy Saving Tips

Enable Energy Saver mode in humid conditions. Keep doors closed tightly. Ensure seals are clean. Position away from heat sources. Set appropriate temperatures (37°F fridge, 0°F freezer).

Care & Cleaning

Unplug before cleaning interior. Use mild detergent and warm water; rinse and dry.

Exterior: Clean with soft cloth and mild cleaner. Interior: Remove shelves and bins; wash separately. Condenser coils: Vacuum every 6 months. Door seals: Wipe clean to maintain seal.

CAUTION! Never use abrasive cleaners, hot water, or solvents on surfaces.

Regulatory Information

UL listed; complies with FCC Part 15 Class B. ENERGY STAR® certified. Copyright © Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-536-6247. Model: Elite 795.XXXXXX. Serial number located on interior side wall.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Refrigerator not cooling	Power/controls	Ensure plugged in; check circuit breaker; verify temperature settings.
Water dispenser not working	Filter/water supply	Replace filter; ensure water line valve is open; check for kinks.
Ice maker not producing ice	Arm position/temperature	Ensure arm is down (ON); freezer must be at 0°F or below.
Excessive frost in freezer	Door seal/defrost	Check door seal; ensure door closes fully; manual defrost if needed.
Unusual noises	Leveling/fan	Level refrigerator; ensure no items touching back wall; check fan for obstruction.

Reset: Unplug for 5 minutes, then replug to reset control board.

Service: 1-800-536-6247; www.kenmore.com