Kenmore Refrigerator Model 795 Manual

The Kenmore Refrigerator Model 795 is a top-freezer refrigerator designed for reliable household food preservation. It features adjustable glass shelves, humidity-controlled crispers, a full-width freezer with wire shelves, automatic defrost, and an energy-efficient design. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using Your Refrigerator 7. Care & Cleaning 8. Food Storage Tips 9. Energy Saving 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Top-mounted freezer, Fresh food compartment, Adjustable glass shelves, Humidity-controlled crispers, Full-width freezer shelf, Automatic defrost system, Temperature control dial.

Feature	Description
Top Freezer	Full-width freezer compartment with wire shelf for organized storage
Adjustable Glass Shelves	Shelves can be repositioned to accommodate tall items
Humidity-Controlled Crispers	Preserves freshness of fruits and vegetables
Automatic Defrost	Eliminates need for manual defrosting in fresh food compartment
Door Bins	Adjustable door storage for gallons, condiments, and cans
Temperature Control	Dial control for setting cooling level
Energy Saver Switch	Reduces condensation in humid environments
Leveling Legs	Front adjustable legs for stability
Interior Light	Illuminates fresh food compartment when door is open
Power Cord	Three-prong grounded plug

Installation

Unpack and inspect contents. Remove all packaging materials and tape.

Choose Location: Place on a level, solid floor near a grounded electrical outlet. Allow clearance at back, top, and sides for air circulation.
Level the Refrigerator: Adjust the front leveling legs until the refrigerator is stable and doors close easily.
Connect to Power: Plug the three-prong plug into a dedicated 115V, 60Hz, 15-amp outlet.
Initial Cooling: Allow the refrigerator to run for 2-4 hours before adding food.

WARNING! Do not use an extension cord. Ensure the refrigerator is level to prevent door alignment issues.

First-Time Setup

After installation, configure settings for optimal operation.

Set Temperature: Turn the control dial to the midpoint setting. Allow 24 hours for temperatures to stabilize.
Adjust Shelves: Position glass shelves and door bins according to your storage needs.
Energy Saver: In humid environments, set the energy saver switch to ON to reduce sweating.
Check Door Seal: Ensure the magnetic door gaskets are clean and sealing properly.

CAUTION! Do not block air vents inside the refrigerator with food packages.

Specifications

Model: 795
Type: Top-Freezer Refrigerator
Total Capacity: 18.0 Cubic Feet
Fresh Food Capacity: 12.5 Cubic Feet
Freezer Capacity: 5.5 Cubic Feet
Defrost System: Automatic (Fresh Food), Manual (Freezer)
Shelves: 3 Adjustable Tempered Glass Shelves
Power Requirements: 115V AC, 60Hz
Annual Energy Use: [Refer to Energy Guide Label]
Dimensions (HxWxD): 65.5" x 29.5" x 31.5"

Controls and Settings

The main control is a dial located inside the fresh food compartment.

Temperature Control Dial: Settings range from 1 (warmest) to 9 (coldest). The midpoint (usually 4 or 5) is recommended for normal operation.

Energy Saver Switch: Located near the temperature control. Use ON in humid conditions to minimize condensation. Use OFF in normal/dry conditions.

Freezer Control: The freezer temperature is affected by the main control dial. A colder fresh food setting will also make the freezer colder.

Interior Light: Turns on automatically when the fresh food door is opened.

Using Your Refrigerator

Organize food for optimal cooling and accessibility.

Shelves: Store dairy, drinks, and leftovers on upper shelves where temperature is most consistent.
Crispers: Use for fruits and vegetables. Adjust humidity slider: High for vegetables, Low for fruits.
Door Bins: Store condiments, juices, and other items with high tolerance for temperature fluctuation.
Freezer: Use baskets and shelf for frozen foods. Do not overload to allow for proper air circulation.
Allow Hot Foods to Cool: Let hot foods reach room temperature before placing inside.

Tip: Cover liquids and wrap foods to prevent odor transfer and drying out.

Care & Cleaning

Unplug refrigerator before cleaning interior components (except for quick wipes).

Interior: Wash shelves, crispers, and interior surfaces with a solution of warm water and baking soda. Rinse and dry.
Door Gaskets: Wipe with a clean, damp cloth to remove food particles. Check for proper seal.
Exterior: Clean with a soft cloth dampened with mild soap and water. For stainless steel, use a cleaner designed for appliances.
Condenser Coils: Vacuum the rear or base-mounted coils every 6-12 months to maintain efficiency.

CAUTION! Do not use abrasive cleaners, scouring pads, or solvents. Never pour water inside the unit.

Food Storage Tips

Recommended temperatures: Fresh Food: 37°F, Freezer: 0°F.

Meat/Poultry: Store in original packaging on a low shelf to prevent drips.
Dairy: Store on upper shelves, not in the door, for consistent temperature.
Produce: Do not wash before storing. Use crispers with appropriate humidity settings.
Freezer: Package foods in airtight, moisture-proof wrapping to prevent freezer burn.
Do Not Overfill: Allow space between items for cold air to circulate.

Energy Saving

Set temperature to recommended settings (midpoint on dial).
Ensure door seals are airtight.
Allow hot foods to cool before storing.
Cover liquids and wrap foods.
Vacuum condenser coils regularly.
Do not hold the door open longer than necessary.
Use the Energy Saver switch appropriately for your climate.

Regulatory Information

This appliance complies with relevant safety standards. Disposal: Dispose of refrigerator in accordance with Federal and local regulations. Remove doors before disposal to prevent child entrapment. For service, refer to your warranty or contact Sears Home Services. Kenmore is a registered trademark of Sears Brands, LLC.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Refrigerator is not cooling	Power issue, control setting	Ensure unit is plugged in and outlet works. Check if control dial is set to OFF. Set dial to midpoint.
Freezer is not cold enough	Control setting, blocked vents	Turn control to a colder setting. Ensure food packages are not blocking air vents inside.
Excessive frost in freezer	Door left open, poor seal	Ensure door is closing completely. Check door gasket for tears or debris. Defrost freezer manually.
Water pooling inside or under unit	Clogged defrost drain, high humidity	Check for clog in the defrost drain channel (fresh food section). Turn Energy Saver switch ON.
Unit is noisy	Not level, items vibrating	Level the refrigerator. Check if bottles or containers are touching and causing vibration.
Interior light does not work	Bulb burned out, door switch	Replace bulb with appliance bulb of same wattage. Check door switch operation.

Reset: Unplug the refrigerator for 5 minutes, then plug it back in.

Service: For persistent issues, contact Sears Home Services or an authorized technician.