Kenmore Series 200 Washer Manual

The Kenmore Series 200 is a top-loading washing machine designed for household use, featuring multiple wash cycles, load size settings, and energy-efficient operation. It includes a durable stainless steel tub, automatic water level sensing, and a user-friendly control panel. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operating the Washer 8. Special Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control Panel, Stainless Steel Tub, Agitator, Lid, Water Inlet Hoses, Drain Hose, Power Cord.

Feature	Description
Control Panel	For selecting cycles, options, and starting the washer
Stainless Steel Tub	Durable, rust-resistant washing tub
Agitator	Moves clothes through water for thorough cleaning
Lid	Safety lid with lock during operation
Water Inlet Hoses	Hot and cold water connections
Drain Hose	For draining used water
Power Cord	For electrical connection
Cycle Selector Knob	Selects wash cycles (Normal, Delicate, Heavy Duty, etc.)
Temperature Controls	Adjusts water temperature (Hot, Warm, Cold)
Start/Pause Button	Starts or pauses the wash cycle

Installation

Unpack and inspect contents. Place on level floor.

Connect water supply: Attach hot and cold water hoses to faucets and washer inlet valves.
Connect drain hose: Place hose into standpipe or laundry tub.
Level the washer: Adjust leveling legs to ensure stability.
Plug into grounded electrical outlet.

WARNING! Washer is heavy; lift with care to avoid injury. Ensure all connections are secure and leak-free.

First-Time Setup

Power on washer; run initial test cycle.

Check water connections: Turn on water faucets and check for leaks.
Run test cycle: Select Normal cycle with hot water and run without clothes.
Adjust leveling: If washer vibrates excessively, re-adjust leveling legs.
Familiarize with controls: Review cycle options and settings.

CAUTION! Ensure washer is level to prevent excessive vibration and noise.

Specifications

Capacity: 4.5 cubic feet.
Dimensions: 27 inches wide, 42 inches high, 27 inches deep.
Voltage: 120V AC, 60Hz.
Water Connections: Hot and cold water inlet hoses.
Cycles: Normal, Delicate, Heavy Duty, Quick Wash, Rinse & Spin.
Options: Extra Rinse, Pre-Soak, Deep Fill.
Motor: Direct drive motor with 10-year warranty.
Energy Star: Meets ENERGY STAR® guidelines for efficiency.

Controls and Settings

Access settings via Control Panel. Front Panel: Cycle Selector Knob, Temperature Controls, Start/Pause Button.

Cycle Selector: Turn knob to select desired wash cycle (Normal, Delicate, Heavy Duty, Quick Wash, Rinse & Spin).

Temperature: Adjust hot/cold water mix for wash and rinse cycles. Options: Extra Rinse (adds additional rinse cycle), Pre-Soak (soaks clothes before washing), Deep Fill (allows more water for large loads).

Connecting Water Supply

Hot/Cold Inlets: Connect labeled hoses. Drain: Secure hose to standpipe.

Turn off water faucets before connecting hoses.
Attach hoses to washer inlet valves (hot to hot, cold to cold).
Connect other ends to water faucets; tighten securely.
Place drain hose into standpipe (minimum 36 inches high).

Tip: Use thread seal tape on hose connections to prevent leaks.

Operating the Washer

Supports various fabric types and soil levels.

Load clothes: Do not overload; leave space for agitation.
Add detergent: Use HE (High-Efficiency) detergent; follow manufacturer's instructions.
Select cycle: Turn knob to desired cycle (e.g., Normal for everyday loads).
Select options: Press buttons for Extra Rinse, Pre-Soak, etc.
Start washer: Press Start/Pause button; lid will lock.
Pause/stop: Press Start/Pause to pause; turn knob to Off to stop.
Unload: Wait for lid to unlock after cycle completes.

WARNING! Do not open lid during spin cycle. Keep hands away from moving parts.

Special Features

Deep Fill: Allows more water for heavily soiled loads. Pre-Soak: Soaks clothes before washing to loosen stains. Extra Rinse: Adds an additional rinse cycle for sensitive skin.

Care & Cleaning

Unplug before cleaning. Wipe exterior with damp cloth; clean tub monthly with washer cleaner.

CAUTION! Do not use abrasive cleaners; keep control panel dry.

Regulatory Information

UL Listed: Complies with safety standards. ENERGY STAR®: Meets energy efficiency guidelines. Copyright © 2025 Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Washer won't start	Power/lid	Ensure plugged in; close lid securely; check circuit breaker.
No water filling	Water supply/hoses	Check water faucets are on; inspect hoses for kinks; clean inlet screens.
Excessive vibration	Leveling/load	Re-level washer; redistribute load evenly.
Water not draining	Drain hose/clog	Check drain hose for kinks; clean lint filter; ensure proper drain height.
Leaking water	Connections/hoses	Tighten hose connections; inspect tub seal; replace damaged hoses.

Reset: Unplug for 1 minute, then plug back in.

Service: 1-800-469-4668; www.kenmore.com