Kenmore Series 700 Manual

The Kenmore Series 700 is a high-performance household appliance line known for its durability and advanced features. This manual covers the operation, maintenance, and troubleshooting for various models within the Series 700, including washers, dryers, and refrigerators. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Advanced control panel, energy-efficient motor, multiple cycle options, durable stainless steel drum (washer/dryer models), adjustable shelves (refrigerator models).

Installation

Unpack and inspect contents. Ensure installation area is level and has proper utility connections.

1. Position appliance: Place on a stable, level surface away from heat sources and direct sunlight.
2. Connect utilities: For washer/dryer, connect water supply hoses and drain hose (washer) or vent duct (dryer). For refrigerator, ensure electrical outlet is dedicated.
3. Level appliance: Use adjustable feet to ensure unit is perfectly level to prevent vibration.
4. Power connection: Plug into appropriate grounded electrical outlet.

WARNING! Appliance is heavy; use two people for moving. Ensure all connections are secure and leak-free.

First-Time Setup

Power on appliance; follow initial setup prompts on display (if applicable).

1. Select language: Use control panel to set display language (default ENGLISH).
2. Run calibration cycle: For washers/dryers, run an empty cycle to calibrate sensors.
3. Set preferences: Configure default temperature settings, cycle preferences, and alert tones.
4. Connect to Wi-Fi: For smart models, follow on-screen instructions to connect to home network.

CAUTION! Do not load items until initial setup and calibration are complete.

Specifications

• Model Series: Kenmore Series 700.
• Capacity: Varies by model (e.g., Washer: 4.5 cu. ft., Dryer: 7.0 cu. ft., Refrigerator: 25 cu. ft.).
• Power Requirements: 120V AC, 60Hz, 15A dedicated circuit.
• Water Requirements (Washer): Hot & Cold water connections, ¾" standard hoses.
• Vent Requirements (Dryer): 4-inch diameter exterior venting.
• Noise Level: ≤ 60 dB during operation.
• Dimensions: Varies by model; refer to specific model label.
• Weight: Approximately 150-250 lbs depending on model.
• Warranty: 1-year limited parts and labor, 10-year motor warranty.

Controls and Settings

Access settings via the digital control panel. Front Panel: POWER, START/PAUSE, CYCLE SELECTION, OPTIONS.

Display: Shows cycle time, settings, and error codes. Navigation buttons: Up/Down for selection, Enter to confirm.

Cycle Settings: Temperature, spin speed (washer), dryness level (dryer), ice maker mode (refrigerator). Preferences: Sound volume, display brightness, child lock, delay start. Smart Features: Remote monitoring, cycle notifications, energy usage reports (smart models).

Connecting Utilities

Water: Hot & cold connections for washer. Drain: Standpipe or utility sink for washer drain hose. Vent: Exterior venting for dryer. Electrical: Dedicated 120V outlet.

1. Turn off water/power before making connections.
2. Use provided hoses and ensure tight connections to prevent leaks.
3. For dryer, use rigid or semi-rigid metal venting material, avoid plastic.
4. Check local building codes for specific installation requirements.

Tip: Use a level during installation to ensure proper operation and reduce noise.

Operating Modes

Supports various cycles for different load types and fabrics.

1. Select cycle: Press CYCLE button to scroll through options (Normal, Heavy Duty, Delicate, etc.).
2. Adjust settings: Use OPTIONS to modify temperature, spin speed, or dryness level.
3. Start cycle: Press START/PAUSE. Display shows remaining time.
4. Pause/Stop: Press START/PAUSE once to pause, hold for 3 seconds to cancel cycle.
5. Delay Start: Set delayed start time (1-24 hours) before starting cycle.
6. Steam Cycle (Dryer): Select Steam cycle to reduce wrinkles or refresh clothes.
7. Smart Cycle: Automatically detects load size and soil level to optimize cycle (select models).

WARNING! Do not overload appliance. Follow load size recommendations in manual.

Maintenance & Care

Clean exterior with damp cloth; use mild detergent if needed. For washer: Monthly clean cycle with washer cleaner. For dryer: Clean lint filter after every load; inspect venting annually. For refrigerator: Clean condenser coils every 6-12 months.

CAUTION! Unplug before cleaning. Do not use abrasive cleaners or harsh chemicals.

Safety Features

Child Lock: Prevents unintended operation. Door Lock: Automatically locks during cycle (washer/dryer). Overheat Protection: Shuts off heating element if temperature exceeds safe limit. Tip-Over Protection (refrigerator): Alerts if unit is not level.

Regulatory Information

UL Listed; meets applicable NSF/ANSI standards. Energy Star certified where applicable. Copyright © Kenmore; trademarks of Kenmore, Inc. For support, visit www.kenmore.com or contact 1-800-536-6247.

Troubleshooting

Reset: Unplug for 5 minutes, then restart. For persistent issues, perform factory reset via settings menu.

Service: 1-800-536-6247; www.kenmore.com