Kenmore Vacuum Cleaner 600 Series Manual

The Kenmore Vacuum Cleaner 600 Series is a powerful upright vacuum designed for deep carpet cleaning and versatile floor care. It features a multi-cyclonic system for strong suction, adjustable height settings for different floor types, a HEPA filtration system, onboard tools for above-floor cleaning, edge cleaning bristles, and a retractable cord. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Assembly & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Attachments & Accessories 7. Cleaning Operations 8. Maintenance & Care 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Motor unit with cyclonic system, Adjustable handle, Dirt cup or bag assembly, Onboard tool caddy, Power cord, Floor nozzle with brushroll, Edge cleaning bristles.

Feature	Description
Multi-Cyclonic System	Maintains strong suction by separating dirt from air
Adjustable Cleaning Height	Settings for bare floors, low-pile, and high-pile carpets
HEPA Filtration	Traps 99.7% of dust and allergens
Onboard Tools	Crevice tool, dusting brush, and upholstery nozzle stored on unit
Edge Cleaning Bristles	Cleans along baseboards and edges
Retractable Power Cord	Convenient cord rewinding at press of a button
Brushroll On/Off Switch	Disengages brushroll for delicate floor cleaning
Dirt Cup/Bag Full Indicator	Alerts when container needs emptying or replacing
Wand Release Pedal	Easy transition to above-floor cleaning
Headlight	Illuminates cleaning path in dark areas

Assembly & Setup

Unpack and inspect all parts. Assemble on a flat, stable surface.

Attach the handle: Align handle with body until it clicks into place.
Install dirt cup or bag: For bagless models, secure empty dirt cup. For bagged models, insert new bag per instructions.
Attach hose and wand: Connect hose to vacuum body and wand to hose.
Mount onboard tools: Snap crevice tool and dusting brush into caddy on handle.
Plug into standard 120V AC outlet.

WARNING! Ensure vacuum is unplugged during assembly. Handle with care to avoid pinching.

First-Time Use

Plug in vacuum; ensure all parts are securely connected.

Adjust height setting: Turn dial on floor nozzle to match floor type (bare floor, low-pile, high-pile carpet).
Check brushroll engagement: For carpets, ensure brushroll is ON. For bare floors, turn brushroll OFF.
Begin cleaning: Press power foot pedal; push vacuum forward and back in slow, overlapping strokes.
Use attachments: Press wand release pedal to detach wand; select appropriate tool for furniture, stairs, or crevices.

CAUTION! Keep hair, loose clothing, and cords away from brushroll. Do not vacuum wet spills.

Specifications

Model Series: 600 Series Upright Vacuum.
Motor: High-efficiency, multi-cyclonic system.
Filtration: HEPA filter (washable/replaceable).
Cord Length: 25-foot retractable cord.
Dirt Capacity: Bagless: 1.5-liter cup; Bagged: Standard Kenmore bags.
Cleaning Path: 12-inch nozzle width.
Height Settings: 5 positions (bare floor to plush carpet).
Weight: Approximately 15 lbs.
Power Source: 120V AC, 60Hz.
Warranty: Limited 1-year warranty.

Controls and Settings

Main power operated via foot pedal. Handle controls: Brushroll switch, Cord rewind button, Wand release pedal.

Settings: Height adjustment dial (1-5), Brushroll ON/OFF for carpets vs. bare floors, Headlight ON/OFF (if equipped).

Indicator Lights: Power ON, Dirt cup/bag full, Brushroll jam, Filter replacement reminder.

Attachments & Accessories

Included tools: Crevice tool, Dusting brush, Upholstery nozzle, Extension wand.

For above-floor cleaning: Detach wand, attach desired tool to end of hose.
For stairs: Use hose with upholstery nozzle directly.
For drapes and ceilings: Use extension wand with dusting brush.

Tip: Store tools in onboard caddy when not in use for easy access.

Cleaning Operations

Designed for carpets, bare floors, and above-floor surfaces.

Carpet cleaning: Set height appropriately; use slow, forward-and-back motions.
Bare floors: Turn brushroll OFF to prevent scattering debris.
Edges and corners: Use edge cleaning bristles on nozzle side.
Furniture and stairs: Use hose with upholstery nozzle.
Crevices: Use crevice tool for tight spaces.
Dusting: Use dusting brush for shelves, blinds, and electronics.
Cord retraction: After use, press cord rewind button; guide cord to avoid tangling.

WARNING! Do not vacuum sharp objects, hot ashes, or flammable materials. Empty dirt cup/bag regularly.

Maintenance & Care

Unplug vacuum before all maintenance.

Empty dirt cup: Press release button; empty contents into trash; reinstall.
Replace bag: When indicator lights, remove old bag; insert new one.
Clean filters: Remove HEPA and pre-motor filters; tap gently or rinse (if washable) per manual; air dry completely before reinstalling.
Check brushroll: Remove debris (hair, strings) from brushroll; ensure it spins freely.
Inspect hose and attachments: Clear any clogs with long, flexible object.

CAUTION! Do not operate without filters. Ensure all parts are completely dry before reassembly.

Regulatory Information

UL Listed; complies with U.S. safety standards. Copyright © Kenmore; trademarks of Kenmore, Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668. This appliance is for household use only.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dirt cup/bag, clog, or dirty filter	Empty/replace dirt container; check hose and nozzle for blockages; clean/replace filters.
Brushroll not spinning	Debris wrapped around brushroll, belt broken, or switch OFF	Unplug; remove debris from brushroll ends; check and replace belt if necessary; ensure brushroll switch is ON.
Vacuum won't turn on	Power cord not plugged in, outlet issue, or foot pedal not engaged	Check plug and outlet; try another outlet; ensure foot pedal is fully pressed.
Unusual noise/vibration	Foreign object in brushroll or impeller, loose part	Unplug; inspect brushroll and hose for obstructions; tighten any loose components.
Cord not retracting	Tangled cord or rewind mechanism jammed	Unplug; manually rewind cord; clear any tangles or debris from rewind area.
Overheating	Clogged filters, blocked airflow, or continuous extended use	Turn off and unplug; let cool; clean filters and clear any clogs; avoid running for more than 60 minutes continuously.

Reset: Unplug for 10 minutes if motor overheats; plug back in.

Service: 1-800-469-4668; www.kenmore.com