Kenmore Vacuum Cleaner Manual

The Kenmore Vacuum Cleaner is a versatile household appliance designed for efficient cleaning on various surfaces, featuring powerful suction, multiple attachments, HEPA filtration, adjustable height settings, cord rewind, bag or bagless options, and easy-to-empty dust containers. Below are key sections for safety, features, assembly, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Motor unit, dust container or bag, hose, wand, floor nozzle, crevice tool, upholstery brush, HEPA filter, cord rewind, power switch, height adjustment lever.

Feature	Description
Powerful Suction Motor	Provides strong airflow for deep cleaning carpets and hard floors
HEPA Filtration System	Traps 99.97% of dust and allergens for improved air quality
Adjustable Height Settings	Multiple settings for different carpet pile heights
Cord Rewind Button	Automatically retracts power cord for easy storage
Bagless Dust Container	Easy-to-empty transparent container with full indicator
Attachments Included	Crevice tool, upholstery brush, dusting brush, extension wand
On/Off Switch	Foot-operated or manual power control
Headlight	Illuminates dark areas under furniture
Edge Cleaning	Special design cleans along baseboards and edges
Washable Filters	Reusable filters for reduced maintenance costs

Assembly & Setup

Unpack and inspect all components. Assemble on clean, flat surface.

1. Attach wand to vacuum body: Insert wand into socket until it clicks securely.
2. Connect hose: Attach hose to wand connection point, ensuring tight fit.
3. Install floor nozzle: Click nozzle onto wand end or hose connection.
4. Install filters: Place HEPA filter and pre-motor filter as indicated in manual.
5. Attach wheels/casters: If required, snap wheels into bottom of vacuum base.
6. Plug into appropriate electrical outlet.

WARNING! Ensure vacuum is unplugged during assembly. Keep small parts away from children.

First-Time Use

Before first use, ensure all filters are properly installed.

1. Adjust height setting: Turn dial or press lever to match floor surface (bare floor, low pile, medium pile, high pile carpet).
2. Check cord length: Unwind sufficient cord for cleaning area.
3. Test attachments: Ensure all connections are secure before use.
4. Empty dust container: If bagless, ensure container is empty before first use.
5. Test suction: Turn on vacuum to verify proper operation.

CAUTION! Do not vacuum wet surfaces, liquids, or flammable materials.

Specifications

• Motor Power: [Insert specific amperage/wattage]
• Suction Power: [Insert specific airflow measurement]
• Cord Length: [Insert length] feet
• Dust Capacity: [Insert capacity] liters/quarts
• Filtration: HEPA filtration system
• Weight: [Insert weight] pounds
• Noise Level: [Insert decibel rating] dB
• Height Settings: 4-6 adjustable positions
• Power Source: 120V AC, 60Hz
• Warranty: [Insert warranty period] limited warranty

Controls and Settings

Main controls located on vacuum body: Power switch, cord rewind button, height adjustment, dust container release.

Power Switch: Turns vacuum on/off. May be foot-operated or manual toggle.

Cord Rewind: Press button to automatically retract power cord.

Height Adjustment: Dial or lever with settings for different floor types.

Dust Container Release: Button to detach container for emptying.

Filter Access: Latches or buttons to access filter compartments.

Attachment Release: Buttons to detach hose, wand, or nozzles.

Using Attachments

Each attachment designed for specific cleaning tasks.

1. Crevice Tool: For tight spaces, corners, between cushions.
2. Upholstery Brush: For furniture, curtains, car interiors.
3. Dusting Brush: For delicate surfaces, blinds, lampshades.
4. Extension Wand: For high ceilings, overhead cleaning.
5. Motorized Brush: For pet hair removal (if included).

Tip: Turn off vacuum before changing attachments.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Empty dust container: When full indicator shows or after each use.
2. Clean brush roll: Remove hair and debris from rotating brush.
3. Check for blockages: Inspect hose, wand, and nozzle for obstructions.
4. Clean wheels/casters: Remove wrapped hair and debris.
5. Inspect belts: Replace if worn or damaged (if applicable).
6. Wipe exterior: Use damp cloth to clean vacuum body.

WARNING! Always unplug vacuum before performing maintenance.

Filter Care

Proper filter maintenance is essential for suction power and air quality.

1. Pre-Motor Filter: Clean monthly by tapping gently or rinsing (if washable).
2. HEPA Filter: Replace every 6-12 months depending on use.
3. Exhaust Filter: Clean as needed to maintain airflow.
4. Filter Replacement: Use only Kenmore-approved replacement filters.

CAUTION! Allow filters to dry completely before reinstalling.

Storage & Safety

Store vacuum in cool, dry place away from heat sources.

1. Rewind cord completely before storage.
2. Store attachments in designated compartments or bags.
3. Empty dust container before long-term storage.
4. Do not store with wet filters or components.
5. Keep vacuum upright during storage.

Safety Precautions:

• Do not use outdoors or on wet surfaces
• Keep hair, loose clothing, and fingers away from moving parts
• Do not vacuum burning or smoking materials
• Do not use with damaged cord or plug
• Supervise children when vacuum is in use

Regulatory Information

UL Listed: Meets safety standards for household use. ETL Certified: Verified for electrical safety. Copyright © [Year] Kenmore; trademarks of Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668. This product may be covered by one or more patents.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Loss of suction	Full dust container, clogged filters, blockage	Empty container; clean filters; check for obstructions in hose and nozzles.
Brush roll not spinning	Obstruction, worn belt, tangled debris	Clear debris from brush roll; check and replace belt if necessary.
Vacuum won't turn on	Power source, cord damage, switch failure	Check outlet; inspect cord for damage; ensure switch is functioning.
Unusual noise	Foreign object in fan, worn bearings	Turn off immediately; check for and remove foreign objects; contact service if noise persists.
Cord won't rewind	Tangled cord, rewind mechanism issue	Untangle cord manually; check rewind spring mechanism.
Overheating	Clogged filters, blockage, continuous use	Clean filters; remove blockages; allow vacuum to cool before resuming use.

Reset: Unplug vacuum for 30 minutes to reset thermal protection if overheated.

Service: 1-800-469-4668; www.kenmore.com