Kenmore Washer Dryer Combo Manual

The Kenmore Washer Dryer Combo is an all-in-one laundry solution featuring multiple wash cycles, drying options, energy-efficient operation, and user-friendly controls. This manual covers safety instructions, installation, operation, maintenance, and troubleshooting for your Kenmore combo unit. Below are key sections for getting started with your appliance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating Cycles 8. Maintenance & Cleaning 9. Safety Features 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, detergent dispenser, lint filter, water inlet valves, drain pump, and drum.

Feature	Description
Wash Cycles	Normal, Heavy Duty, Delicates, Quick Wash, Sanitize
Dry Cycles	Auto Dry, Timed Dry, Air Fluff, Low Heat
Control Panel	Digital display with touch controls
Capacity	4.5 cu. ft. washer, 7.4 cu. ft. dryer
Energy Efficiency	ENERGY STAR certified
Detergent Dispenser	Automatic liquid detergent and fabric softener
Lint Filter	Removable for easy cleaning
Child Lock	Prevents accidental changes during operation
Delay Start	Set wash/dry cycle to start later
End of Cycle Signal	Audible alert when cycle completes

Installation

Unpack and inspect contents. Place on level floor.

Remove shipping materials: Take off transit bolts and packaging.
Connect water supply: Attach hot and cold water hoses to corresponding valves.
Connect drain hose: Secure to standpipe or laundry sink.
Connect electrical: Plug into dedicated 120V outlet.
Connect venting: Attach 4-inch dryer vent to exterior vent hood.

WARNING! Unit is heavy; use two people for moving. Ensure all connections are secure and leak-free.

First-Time Setup

Power on unit; follow initial setup prompts.

Run cleaning cycle: Select Clean Washer cycle to remove manufacturing residues.
Set preferences: Configure language, default temperature, and spin speed.
Test operation: Run quick wash cycle to verify proper function.
Load detergent: Fill detergent and fabric softener dispensers.

CAUTION! Ensure unit is level to prevent vibration. Check water connections before first use.

Specifications

Model Type: Washer Dryer Combo
Capacity: 4.5 cu. ft. washer / 7.4 cu. ft. dryer
Voltage: 120V AC, 60Hz
Water Connections: Hot and cold water inlet
Water Pressure: 20-120 psi
Drain Requirements: Minimum 30-inch height
Vent Requirements: 4-inch diameter venting
Dimensions: 27" W x 38" D x 74" H
Weight: 250 lbs
Energy Rating: ENERGY STAR certified

Controls and Settings

Access settings via control panel touch buttons. Display shows cycle status, time remaining, and options.

Main Controls: POWER, START/PAUSE, CYCLE SELECTION, TEMPERATURE, SPIN SPEED, DRY TIME, OPTIONS.

Wash Settings: Temperature (Hot, Warm, Cold), Spin Speed (High, Medium, Low, No Spin), Soil Level (Heavy, Normal, Light). Dry Settings: Dryness Level (Very Dry, Dry, Damp), Temperature (High, Medium, Low, No Heat), Time (10-180 minutes). Options: Delay Start, Extra Rinse, Pre-Wash, Child Lock, Signal Volume.

Connecting Utilities

Water: Hot and cold inlet hoses. Drain: Standpipe or laundry sink. Electrical: 120V outlet. Vent: 4-inch duct to exterior.

Turn off water supply before connecting hoses.
Use only reinforced washing machine hoses.
Ensure drain hose is secured to prevent slipping.
Vent must be as short and straight as possible.

Tip: Install drip pan under unit if on second floor or above living spaces.

Operating Cycles

Supports combined wash/dry cycles or separate operations.

Load laundry: Do not overload; follow capacity guidelines.
Add detergent: Use HE detergent only; follow manufacturer instructions.
Select cycle: Choose appropriate wash and dry settings.
Start cycle: Press START; unit will begin operation.
Monitor progress: Display shows time remaining and current stage.
Unload promptly: Remove laundry immediately after cycle ends.
Clean lint filter: After every drying cycle.

WARNING! Do not overload machine. Clean lint filter regularly to prevent fire hazard.

Maintenance & Cleaning

Monthly maintenance ensures optimal performance.

Clean detergent dispenser: Remove and rinse monthly.
Clean drum: Run Clean Washer cycle monthly.
Clean lint filter: After every drying cycle.
Check drain pump filter: Clean quarterly.
Inspect hoses: Check for leaks or wear annually.

CAUTION! Unplug unit before cleaning. Do not use abrasive cleaners.

Safety Features

Child Lock: Prevents changes during operation. Door Lock: Automatically locks during cycles. Overheat Protection: Shuts off heating element if temperature exceeds safe limit. Overflow Protection: Monitors water level to prevent flooding. Unbalanced Load Detection: Adjusts spin or stops cycle if load is unbalanced.

Regulatory Information

UL Listed: Complies with UL safety standards. ENERGY STAR: Meets energy efficiency guidelines. FCC Part 15: Class B digital device; complies with interference limits. Copyright © 2025 Kenmore; trademarks of Kenmore, Sears Brands, LLC. For support, visit www.kenmore.com or contact 1-800-469-4668.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit won't start	Power/door	Check power cord; ensure door is closed securely; press START firmly.
No water filling	Water supply/hoses	Ensure water valves are open; check for kinked hoses; clean inlet screens.
Water won't drain	Drain hose/clog	Check drain hose for kinks; clean drain pump filter; ensure proper drain height.
Excessive vibration	Leveling/load	Ensure unit is level; adjust leveling feet; redistribute unbalanced load.
Clothes still wet	Spin speed/vent	Select higher spin speed; check venting for restrictions; clean lint filter.
Error codes displayed	Various faults	Refer to error code chart in manual; reset unit by unplugging for 5 minutes.

Reset: Unplug for 5 minutes to reset control board.

Service: 1-800-469-4668; www.kenmore.com